Brass 3/8" NPT Air Ride Suspension Valve
w/ Slow Down Dump
One Air Ride Suspension Valve 3/8"npt
We Will Also Include:
One - Adjustable Slow Down Dump Valve
Valve Features:
2 - Positions (open & closed)
12 Volt
250 PSI Max
10mm (3/8") Orifice
Solenoid Valve
4-Corner Valve Unit is engineered to provide the cleanest installation and most reliable operation on the market. This electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has built-in push-to-connect 3/8" D.O.T. approved air fittings for all of its plumbing connections. The robust internal solenoid valve architecture maximizes flow rates, provides bubble-tight sealing, and guarantees operation up to 200 psi for millions of cycles. All of this technology is housed in a unique enclosure design which routes each of the solenoid wires to a single weatherproof connector, eliminating typically loose wires. This not only improves the appearance, but it also guarantees proper operation for every installation. With an overall size of only 5.28"x 2.75"x 2.75" and the ability to survive harsh under vehicle environments.
PRE-INSTALLED D.O.T. / PTC FITTINGS INLET & EXHAUST PORTS ON EACH END
This electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has built-in push-to-connect 3/8" D.O.T. approved air fittings for all of its plumbing connections.
ALL STAINLESS STEEL VALVE COMPONENTS 200 PSI DIRECT OPERATED BUBBLE-TIGHT VALVES
The robust internal solenoid valve architecture maximizes flow rates, provides bubble-tight sealing, and guarantees operation up to 200 psi for millions of cycles.
1/4" NPT PRESSURE PORTS
(4) 1/4" NPT Threaded ports on the backside of the manifold for use with hardline fittings or pressure sensors if desired (Remove plugs).
PRE-WIRED WITH PLUG-N-PLAY CONNECTOR
High quality weather-proof plug-n-play harnesses make for fast and accurate wire connections that will last in the harsh under-vehicle environment.
Features:
- For use with e-LevelTM Controller or any other brand of controller or switches.
- Pre-wired & Port Numbered for reduced installation time.
- 1/4" NPT ports for more flexibility of installation.
- High Pressure Rated for operation up to 200 psi.
- Dual Inlet & Exhaust ports for maximum flow (Plug extra inlet if not required).
- Compact Layout for minimal space usage (5"x 3"x 3").
- Anodized Aluminum Manifold to prevent corrosion.
- 100% Weather Resistant for harsh under vehicle environments.
Included:
- VU4 4-Corner Solenoid Valve Unit
- 1 ft Plug-n-Play Weatherproof Harness (for use with e-Level controller). Splice for use with any controller or switches.
