- Strong and durable
- Quickly slice through wind chop , no pounding
- Stability when rest
- Safety when running down a wave.
- Minimise maintenance
- Comfortable and functional
- Easy launch and retrieve.
- Three years warranty
- Easy store
- Confidence on the water
Resting V berth with cushion
Closed wheelhouse door
| SPECIFICATIONS | 7.5m |
| 9.6 | |
| Length Maximum(m) | 8.25 |
| Length of the hull(m) | 7.5 |
| Beam (m) | 2.45 |
| Depth(m) | 1.45 |
| Bottomsides(mm) | 5 |
| Topsides(mm) | 5 |
| Transom(mm) | 5 |
| Transom Shaft | 25' |
| Weight(boat only) | 1670KG |
| Min. HP | 200 |
| MAX. HP | 300 |
| Person capacity(basic) | 8 |
| Warranty : | 3 YEARS |
| Bow Rollor | √ |
| Fast draining Anchor well | √ |
| Storage pockets fore,aft and sides | √ |
| Safety Windscreen/ Scuttle | √ |
| Extruded Side Decks | √ |
| Transducer/Trim tables mounting plate | √ |
| Bilge Pump | √ |
| Large buoyancy tanks(5) | √ |
| Bait board with rod holders | √ |
| Rocket launcher | √ |
| Folding rear seat | √ |
| hardtop roof with rod rack | √ |
| Quality driver and passenger seating | √ |
| Floor:aluminum plate with carpeted | √ |
| Cuddy cabin with portlights | √ |
| Battery Box(two) | √ |
| Dive/swim rear ladder | √ |
| Aluminum rod holders | √ |
| Slidding window and door | √ |
| kichen area | √ |
| Self draining deck | √ |
| Rails (front,transom) | √ |
| Painting:Two Tone | √ |
| Double Chiles | √ |
| Fuel tank | 2x180L |
| Fish tank | 100L |
| Live bait tank | 80L |
| Fresh water tank | x |
| LED cabin light | √ |
| LED anchor light | √ |
| LED navigation light | √ |
| Switch control panel | √ |
WHY CHOOSE US
A: Gospel Boats are superior structures, built at our factory to European CE Certifications standards.
B: The material used is marine grade alloy certified, with a 5 mm plate hull throughout, and 4 mm plates on structural components.
C: Our boats have fully welded sealed alloy decks, and have fully welded frames and girders, ensuring that structural members are not left floating and unfixed as in all other brands.
D: All welders and fabricators at our factory are certified marine specialists.
E: To ensure the utmost quality, full on site chemical, physical and weight testing is undertaken of all raw materials.
F: All designs are prepared by naval architects on CAD software.
G: All plate aluminium cutting is computerised allowing for the perfect fit.
H: Every hull is personally inspected over and over and welds are tested for defects, fuel and water tanks are baffled and pressure tested.
I: Additionally, every boat is personally thoroughly inspected before it leaves the factory.A: Gospel Boats are superior structures, built at our factory to European CE Certifications standards.
B: The material used is marine grade alloy certified, with a 5 mm plate hull throughout, and 4 mm plates on structural components.
C: Our boats have fully welded sealed alloy decks, and have fully welded frames and girders, ensuring that structural members are not left floating and unfixed as in all other brands.
D: All welders and fabricators at our factory are certified marine specialists.
E: To ensure the utmost quality, full on site chemical, physical and weight testing is undertaken of all raw materials.
F: All designs are prepared by naval architects on CAD software.
G: All plate aluminium cutting is computerised allowing for the perfect fit.
H: Every hull is personally inspected over and over and welds are tested for defects, fuel and water tanks are baffled and pressure tested.
I: Additionally, every boat is personally thoroughly inspected before it leaves the factory.
