*Landing craft has been desgined for both work and pleasure
*large cargo deck, wide, singular door with manual or electric winch
*Fully-welded checkerplate deck is easy to clean.
*Multiple painting colors are available
*Safety chains and several tie-down points make the loading and securing cargo almost effortless.
*Customized size are available.
strong and firm hull structure with marine grade aluminum alov 5083
Two tone of painting and customized colors are available
Center console 
| MEASUREMENTS | |
| Length Of The Hull | 7.9m/26ft |
| Beam(m) | 2.45m |
| Depth(m) | 1.4m |
| Draft(m) | 0.35m |
| Bottom Sides(mm) | 5mm |
| Top Sides(mm) | 4mm |
| Transom(mm) | 5mm |
| Transom Shaft | 25" |
| Rec.HP | 150 |
| Capacity(kg) | 2500 |
| Standard Accessories For the Boats | |
| Fuel Tank Gauge | v |
| Fuel Tank Cleaning Opening | v |
| Outboard Protection Rails | v |
| Storage Gasket Cover | v |
| Fuel Tank | 300L |
| Lifebuoy Bracket | v |
| Fire Extinguisher Bracket | v |
| Deck Self Drain Holes | v |
| Exhaust Vent Hose | v |
| Acrylic Windscreen | v |
| Hand Rail | v |
| Bollard | v |
| Hinge | v |
| Control Panel | v |
| Hardtop | x |
| Fuel Hose | v |
| Control Panel | v |
| Zinc | v |
| Safety Door Hinge | v |
| Bottom | shallow V |
WHY CHOOSE US
A: Gospel Boats are superior structures, built at our factory to European CE Certifications standards.
B: The material used is marine grade alloy certified, with a 5 mm plate hull throughout, and 4 mm plates on structural components.
C: Our boats have fully welded sealed alloy decks, and have fully welded frames and girders, ensuring that structural members are not left floating and unfixed as in all other brands.
D: All welders and fabricators at our factory are certified marine specialists.
E: To ensure the utmost quality, full on site chemical, physical and weight testing is undertaken of all raw materials.
F: All designs are prepared by naval architects on CAD software.
G: All plate aluminium cutting is computerised allowing for the perfect fit.
H: Every hull is personally inspected over and over and welds are tested for defects, fuel and water tanks are baffled and pressure tested.
I: Additionally, every boat is personally thoroughly inspected before it leaves the factory.A: Gospel Boats are superior structures, built at our factory to European CE Certifications standards.
B: The material used is marine grade alloy certified, with a 5 mm plate hull throughout, and 4 mm plates on structural components.
C: Our boats have fully welded sealed alloy decks, and have fully welded frames and girders, ensuring that structural members are not left floating and unfixed as in all other brands.
D: All welders and fabricators at our factory are certified marine specialists.
E: To ensure the utmost quality, full on site chemical, physical and weight testing is undertaken of all raw materials.
F: All designs are prepared by naval architects on CAD software.
G: All plate aluminium cutting is computerised allowing for the perfect fit.
H: Every hull is personally inspected over and over and welds are tested for defects, fuel and water tanks are baffled and pressure tested.
I: Additionally, every boat is personally thoroughly inspected before it leaves the factory.
