Model NO.
2W160-4F 2W160-2F 2W160-F VU4 VU2 VX4 VX2
Max Working Pressure
200psi
Port Size
NPT3/8 NPT1/4 G3/8 G1/4
Voltage
DC12V
Orifice
3mm
Quality Warranty
12months
Customized
Size/Logo/Color
Transport Package
Inner Box, Outer Carton...Pallet
Specification
CE, ROHS, SGS. ISO9001: 2000
Trademark
VPC Pneumatic
Origin
China
HS Code
8481804090
Production Capacity
500000PCS/Month
Material:
Brass
Certification:
ISO10012, BSCI, GMP, GSV, ISO13485, OHSAS18001, ISO14001, ISO/TS16949, ISO9001
Car Make:
Volkswagen, WuLing, Benz, BMW, Hyundai, Honda, Toyota, Jeep, Nissan, Ford, Buick, Chevrolet, Cadillac, Geely, Roewe, Audi, Peugeot, Lexus, Volvo, Mazda, Kia
Position:
Rear
OEM:
Yes
Type:
Suspension & Steering Lower Kits & Parts
Air Ride Suspension Manifold Valve 1/2"npt Fast Air Bag Control fbss 250psi Max
Air Ride Suspension Manifold Valve 1/2"npt Fast Air Bag Control fbss 250psi Max
"V2" Manifold Air Valve
Two Dedicated 1/2"npt Inputs for Maximum Air Supply
No Tee Fittings Needed To Run Analog Or Digital Gauges
No Tee Fittings Needed Between Inflate And Deflate Valve
Using Less Fittings Means Quickest Response Times And Fewer Places To Leak
Controls 4 Bags Independently
Includes Dedicated Air Gauge Ports
12 Volt
250 PSI Max
16MM (5/8") Orifice With 1/2"npt Threads
DC12V Solenoid Valve Manifold for Air Ride Suspension
Specifications
1. Factory Direct
2. Pre-wired with fittings
3. Using the import Deutsch & Molex connector.
4. Inflates and deflates up to (4) individual Air Springs
5. Good replacement to Accuair AA-VU4 Air suspension valve block and Robbion Type solenoid valve
Air Ride Suspension Manifold Valve 1/2"npt Fast Air Bag Control fbss 250psi Max
"V2" Manifold Air Valve
Two Dedicated 1/2"npt Inputs for Maximum Air Supply
No Tee Fittings Needed To Run Analog Or Digital Gauges
No Tee Fittings Needed Between Inflate And Deflate Valve
Using Less Fittings Means Quickest Response Times And Fewer Places To Leak
Controls 4 Bags Independently
Includes Dedicated Air Gauge Ports
12 Volt
250 PSI Max
16MM (5/8") Orifice With 1/2"npt Threads
DC12V Solenoid Valve Manifold for Air Ride Suspension
Specifications
1. Factory Direct
2. Pre-wired with fittings
3. Using the import Deutsch & Molex connector.
4. Inflates and deflates up to (4) individual Air Springs
5. Good replacement to Accuair AA-VU4 Air suspension valve block and Robbion Type solenoid valve
| Technical Specifications: | |
| Compatible Suspension Type | 4-Corner Full Air Suspension |
| Voltage Requirements | 10.5-16 Volts |
| Current Requirements | 1.1 Amps (for each of the (8) Valves) |
| Connectors | IP67 certified (immersion up to 3 ft) |
| Fitting Size | 3/8"NPT (x 8), 1/4" NPT (x 4) |
| No. of Inlet Ports | 2 |
| No. of Exhaust Ports | 2 |
| Max Operating Pressure | 200 psi |
| Cv Flow Factor | 0.33 |
| Average Adjustment Time | 2.2 Seconds |
Send Message
