Model NO.
HPM768
Thread Type
G
Wiring Type
Three-Wire
Measuring Medium
Liquid Gas Steam
IP Rating
IP65
Certification
ISO9001
Customized
Customized
Sensor Type
Pressure Sensor
Pressure
- 100kPa… 0~ 2.5kPa … 4MPa
Pressure Reference
Gauge, Absolute, Sealed Gauge
Overpressure
1.5 times the full scale
Supply
24VDC
Output
4~20mADC, 4~20mADC+HART
Working Temp
-30~85ºC
Medium Temp
-40-130ºC; +150 °C, max 60 min
Electrical Connection
M12*1 or Cable outlet
Accuracy
0.25%
Transport Package
Carton
Trademark
HangJia
Origin
China
HS Code
90262010
Production Capacity
50000 Pieces / Year
Type:
Piezoresistive Pressure Sensor
Component:
SemiConductor Type
For:
Diffused Silicon Pressure Transmitter
Output Signal Type:
Analog Type
Production Process:
Integration
Material:
Stainless Steel
Product Overview:
HPM768 ceramic capacitive pressure transmitter uses imported ceramic sensor as a sensitive element , it directly detects the pressure signal by flush membrane. Ceramic has the characteristics of high elasticity, wear resistance, corrosion resistance, and fast heat dissipation, which makes the transmitter very good thermal stability and extremely low temperature drift. At the same time, the minimum range of this product can reach 500Pa, and the anti-overload capability can reach dozens of times of the full range, which completely solves the problem of poor overload capability in small ranges and it is very suitable for micro-pressure measurement.
Since the ceramic sensor is free of any filling fluid, there is no process contamination, and its dry ceramic diaphragm is not affected by the installation orientation. The clamp end face of this product is exposed directly to detect the pressure, which can prevent scaling, unsanitary and viscous pressure blockage and other problems. It is widely used in food, medicine, winemaking and other hygienic industries and measures the pressure of media where scaling may occur.
Features:
Parameters:
Structure Drawing:
Pressure Port Drawings:
Electrical Connection:
Ordering Guide:
Related Products:
Certification:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on sensor for 10 years.
2. Q: What's your quality control system?
A: MC, ISO9001, CE Certificated.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
HPM768 ceramic capacitive pressure transmitter uses imported ceramic sensor as a sensitive element , it directly detects the pressure signal by flush membrane. Ceramic has the characteristics of high elasticity, wear resistance, corrosion resistance, and fast heat dissipation, which makes the transmitter very good thermal stability and extremely low temperature drift. At the same time, the minimum range of this product can reach 500Pa, and the anti-overload capability can reach dozens of times of the full range, which completely solves the problem of poor overload capability in small ranges and it is very suitable for micro-pressure measurement.
Since the ceramic sensor is free of any filling fluid, there is no process contamination, and its dry ceramic diaphragm is not affected by the installation orientation. The clamp end face of this product is exposed directly to detect the pressure, which can prevent scaling, unsanitary and viscous pressure blockage and other problems. It is widely used in food, medicine, winemaking and other hygienic industries and measures the pressure of media where scaling may occur.
Features:
·All stainless steel casing
·Ceramic capacitor core
·Micro pressure measurement, high overload pressure
·Dry core without any filling fluid
·Flush membrane structure, easy to clean, anti-scaling
·Media temperature up to 130 ºC, up to 150 ºC in 60 minutes
·LCD displayParameters:
| Measuring Medium | Liquid, Gas, Steam |
| Pressure Range | Gauge pressure: - 100kPa… 0~ 2.5kPa … 4MPa; Absolute pressure: 0~1 0kPa … 4MPa |
| Pressure Type | Gauge pressure, absolute pressure or composite pressure |
| Accuracy | ±0.25%FS (Typical); ±0.1%FS (Customized) |
| Long-term Stability | ± 0.50 % FS/year, ≤100kPa ± 0.25 %FS/year, > 100kPa |
| Temperature Coefficient of Zero | ± 1.0 %FS |
| Temperature Coefficient of Full Scale | ± 1.0 %FS |
| Compensation Temp | -20~80ºC |
| Medium Temp | -40~130ºC; +150 °C , max 60 min |
| Output Signal | 4~20mADC, 4~20mA + HART |
| Electrical Connection | M12*1, cable outlet |
| Protection of Shell | IP65 |
Pressure Port Drawings:
Ordering Guide:
| Item No. | Type | |||||||||||
| HPM768 | Ceramic Capacitive Pressure Transmitter | |||||||||||
| Pressure Range | Measuring Range | |||||||||||
| (X1~X2)kPa | X1 is lower range X2 is upper range | |||||||||||
| Code | Output Signal | |||||||||||
| B1 | (4~20)mA | |||||||||||
| B8 | HART | |||||||||||
| Code | Thread Spec | |||||||||||
| K505 | Tri-Clamp 1-1/2″ ISO2852 DN38 DIN32676 DIN32-40 | |||||||||||
| K640 | Tri-Clamp 2″ ISO2852 DN40-51 DIN32676 DIN50 | |||||||||||
| K910 | Tri-Clamp 3″ ISO2852 DN70-76.1 DIN32676 DIN65 | |||||||||||
| KD40 | DIN11851 DN40 | |||||||||||
| KD50 | DIN11851 DN50 | |||||||||||
| KDRD | DRD DN50(65mm) | |||||||||||
| KS12 | SMS 1-1/2″ | |||||||||||
| KS20 | SMS 2″ | |||||||||||
| KF25 | DN25 Flange | |||||||||||
| KF40 | DN40 Flange | |||||||||||
| KF50 | DN50 Flange | |||||||||||
| KASM | ASME Flange | |||||||||||
| KG12 | G 1/2″flush membrane | |||||||||||
| KN12 | NPT 1 1/2″flush membrane | |||||||||||
| P4 | G 1/2″ male thread | |||||||||||
| Code | Electrical Connection | |||||||||||
| C5 | DIN43650 | |||||||||||
| C9 | Cable gland | |||||||||||
| Code | Display | |||||||||||
| D2 | LCD | |||||||||||
| N | None | |||||||||||
| Code | Material that contacting liquid | |||||||||||
| S6 | 316L | |||||||||||
| DF | PVDF | |||||||||||
| HC | Hastelloy | |||||||||||
| Code | Accessories | |||||||||||
| G | Gauge (default) | |||||||||||
| A | Absolute gauge | |||||||||||
| QF | Test report | |||||||||||
| R1 | CE certificate | |||||||||||
| F1 | FKM | |||||||||||
| F2 | FFKM | |||||||||||
| EP | EPDM | |||||||||||
| SI | Silicon rubber | |||||||||||
| Customized | ||||||||||||
| HPM768 | (0~10)kPa | B1 | K640 | C9 | D2 | S6 | G | |||||
Certification:FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on sensor for 10 years.
2. Q: What's your quality control system?
A: MC, ISO9001, CE Certificated.
3. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
4. Q: What is lead time of your product?
A: Normally, our factory lead time is within 10~15 working days for products without customization. You can also check lead time detail with our sales depending on different items.5. Q: Do you provide customized products?
A: Yes, we can laser mark your logo on products; OEM and ODM customization are welcomed.6. Q: What is your MOQ?
A: We have no MOQ limit, small quantity order is acceptable.7. Q: What's the transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid; and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.8. Q: What is your terms of payment ?
A: We could accept T/T, Paypal, WU.
A: We could accept T/T, Paypal, WU.
Send Message
