Model NO.
PC 9
Thread Type
G
Wiring Type
Four-Wire
Measuring Medium
Liquid
IP Rating
IP65
Certification
RoHS
Customized
Customized
Pressure Range
-100kpa~0~10kpa...100MPa
Pressure Reference
Gauge, Absolute, Sealed Gauge
Excitation
1.5mA, 10V
Zero Output
±1mv, ±2mv
Non-Linearity
0.25%Fs
Electrical Connection
Gold-Plated Kovar Pin or Silicon Soft Wire
Operating Temp.
-40ºC~125ºC
Diaphragm Material
316L
Housing Material
316L
Oil Filling
Silicon Oil
Transport Package
Standard Export Packing with Carton
Specification
Diameter: 19mm
Trademark
WTsensor
Origin
China
Production Capacity
1500000PCS/Year
Type:
Piezoresistive Pressure Sensor
Component:
SemiConductor Type
For:
Diffused Silicon Pressure Transmitter
Output Signal Type:
Analog Type
Production Process:
Normal Wirewound
Material:
Stainless Steel
PC9 Industrial Pressure Sensor
Features
l Piezoresistive silicon chip employed
l Perfect long term stability
l MEMS technology
l Sensor diameter: 19mm
Applications
- Process control systems
- Pressure calibration instruments
- Refrigeration equipment and HVAC control
- Hydraulic systems and valves
- Level measurement
- Biomedical instruments
- Ships and navigation
- Aircraft and avionics systems
- Weaponry
Product overview
PC9(WTT19) pressure sensor,19mm pressure sensor,silicon pressure sensor,pressure sensor manufacturer
We are the manufacturer that produce OEM silicon pressure sensor with temperature compensation and small size.
| Electrical performance parameters | |
| Pressure range | -100kPa~0~10kPa…100MPa |
| Pressure reference | Gauge pressure | Absolute pressure | Sealed gauge pressure |
| Excitation | 1.5mA recommended for constant current 10V recommended for constant voltage |
| Input impedance | Constant current: 2kΩ~5kΩ Constant voltage: 3kΩ~18kΩ |
| Electrical connection | Gold-plated KOVAR pin or silicon soft wire |
| Compensation temp. | Constant current: ≤70kPa 0ºC~60ºC; other ranges -10ºC~70ºC Constant voltage: -10ºC~70ºC |
| Operating temp. | -40ºC~125ºC |
| Storage temp. | -40ºC~125ºC |
| Insulation resistance | ≥200MΩ/250VDC |
| Response time | ≤1ms (up to 90%FS) |
| Measured medium | All the liquids and gases compatible with 316L. |
| Mechanical vibration | 20g (20~5000HZ) |
| Shock | 100g (10ms) |
| Service life | 10×106 (cycles) |
| Structural performance parameters | |
| Diaphragm material | 316L |
| Housing material | 316L |
| Oil filling | Silicon oil |
| Sealing ring | NBR or fluorine rubber |
| Basic parameters | ||||||
| Item | Condition | Min | Nominal | Max | Unit | Note |
| Nonlinearity | -0.3 | ±0.2 | 0.3 | %FS | Note(1) | |
| Hysteresis | -0.05 | ±0.03 | 0.05 | %FS | ||
| Repeatability | -0.05 | ±0.03 | 0.05 | %FS | ||
| Zero output | -2 | ±1 | 2 | mV | ||
| Full scale span output | 1.5mA, 10kPa 1.5mA, other ranges 10V, 10kPa 10V, other ranges | 30 60 60 98 | 90 100 | 150 102 | mV | |
| Zero temp. coefficient | 10kPa other ranges | -2 -1.5 | ±1.5 ±0.75 | 2 1.5 | %FS | Note(2) |
| Span temp. coefficient | -1.5 | ±0.75 | 1.5 | %FS | Note(2) | |
| Thermal hysteresis | -0.075 | ±0.05 | 0.075 | %FS | Note(3) | |
| Long term stability | -0.3 | ±0.2 | 0.3 | %FS/Year | ||
Note:
(1) Calculate according to BFSL least square method.
(2) In the compensation temperature range, refer to 30 ºC for 0 ºC ~ 60 and -10 ºC ~ 70 ºC, and refer to 32.5 ºC for -20 ºC ~ 85 ºC.
(3) After passing high and low temperature, return to the reference temperature.
| Structure and dimensions |
In mm
| Electrical connection (in mm) |
| Pressure range selection |
| How to order |
Ordering tips:
1 Pressure range can be selected higher or lower than actual conditions but should be within ±30%FS.
2 Pressure reference consists of gauge pressure, absolute pressure and sealed gauge pressure.
- Gauge pressure is based on the current atmospheric pressure. Generally, it refers to the measurement of pressure which is greater than the current atmospheric pressure. Negative pressure is a special case of gauge pressure. It refers that there is such working condition that the pressure of work site is lower than the current atmospheric pressure.
- Absolute pressure is based on vacuum.
- As for sealed gauge pressure, PC10 uses absolute pressure die for gauge pressure product based on the atmospheric pressure of production site. For pressure range above 6MPa, gauge pressure cannot be selected, but only sealed gauge pressure.
4 The commonly used compensation of the product is 1.5mA constant current compensation. Suggest to select the option with priority.
5 The material and process for manufacturing negative pressure sensors are different from those of positive pressure sensors. So gauge pressure sensors cannot be used as substitute of negative pressure sensors.
6 For special requirements on performance parameters and functions of the product, please contact us.
About Us:
Certifications:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on pressure sensor for 33 years.
2. Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3. Q: What is your production capacity?
A: We produced 1500000 pieces pressure sensor in year 2017.
4. Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
Send Message
