Standard Signal Output of 0.5-4.5V Pressure Sensor Module, Ceramic Core, Ceramic Pressure Sensor

MK series with a compact structure is easy to install, whose specifications could provide strong compatibility between sensitive components and the measured medium, excellent medium adaptability and long-term stability. It could directly output what you need such as standard voltage, current, or digital signals. Because its PCB is fixed on the mounting bracket, it needs a little installation room and provides strong anti-vibration performance. In terms of its ruggedness, it is widely implemented in various fields.

• Economical
• Standard signal output of 0.5-4.5V,
• Modular design in a small structure
• Good stability
• High overloading
• Temperature range: -40… 125 ºC
• Wireless applications in Low-power supplies
• Diversified output signals, even customized

• Constant pressure or building water supply
• Machinery in industrial process control and monitor
• Automatic water pump controller or digital pressure gauge
• Environmental protection in Steel industry
• Medical or agricultural testing machinery
• Flow measure equipment
• Hydraulic and pneumatic control system
• Air-condition and refrigeration equipment
• Internal combustion engine, locomotive brake system, test stand

Specifications
Measuring range	0  ... 1MPa ... 1.6MPa ... 2MPa  ... 5MPa (any range available)
Overload pressure	Twice as rated pressure
Pressure type	≤ 2MPa if Gauge pressure;   ≥ 3MPa if sealed gauge pressure
Measurement medium	Gas or liquid which is compatible with ceramics
Measurement accuracy	±1%FS;      ±0.5%FS
Long-term stability	≤ ± 0.3% FS / year
Operating temperature	-40...+125ºC
Zero temperature coefficient	Typical: ± 0.03% FS / ºC; Maximum: ± 0.05% FS / ºC
Temperature sensitivity coefficient	Typical: ± 0.03% FS / ºC; Maximum: ± 0.05% FS / ºC
Signal and power	Optional signal	Output signal	Supply voltage
	Current (2-wire)   No optional	4...20mA	DC 9...32V
	Proportional voltage (3-wire)	DC 0.5...4.5V	DC 5V±10%
	Low power analog signal (3-wire) No optional	DC 0.33...2.97V	DC 3.3V±10%
	* Other output signals could be provided
Load in Ω	Current (two wires): ≤ [(supply voltage -7.5v) /0.02a]
	Voltage (three wires): ≥10k
Total current consumption	Current (2-wire system): Signal current, max. 25mA
	Voltage (3-wire system): ≤3mA
Impact resistance	100g, half sine of final peak serrated ladder type, runs for 6 ms
Anti-vibration	≤ ± 0.1% FS (X, Y, Z axis, 200Hz / g)
Insulation resistance	> 100MΩ 500Vdc after applying voltage
Response time	≤ 2ms
Weight	About 3.6g without cable
Resolution	Infinitesimal (theoretical), 1/100000 (usually)
Electromagnetic Compatibility	EN50081-1;EN50082-2;IEC61000-4-3