Model NO.
JW-100
Type
Sensor
Conductivity Type
Electrochemical Sensor
Output Signal Type
Microwave
Production Process
Integration
Material
Plastic
IP Rating
N/a
Sensitivity
High
Certification
CE
Customized
Non-Customized
Working Voltage
DC 5V 1A
Alarm Current
Less Then 70mA
Detect Gas
CH2o
Sensor
High Performance Electrochemical Sensor
Color
White
Trademark
Ansee
Transport Package
Carton
Specification
108*45 mm
Origin
China
JW-100 CH2O detector adopt with high performance electrochemical sensors and sophistic-
ated circuit design, it has features like high stability, excellent anti interference ability. When the indoor CH2O concentration is over the standard, this detector can provide site alarm and remote alarm according to different degrees of CH2O (connect with alarm host).
Specification
| Model Name | JW-100 (CH2O Detector) |
| Working Voltage | DC 5V 1A |
| Alarm Current | ≤70mA |
| Standby Current | ≤5mA |
| RF Distance | <=30M (open area); |
| Detect Gas | CH2O |
| Temperature | 0ºC~50ºC |
| Detect Concentration | 0~5PPM |
| Humidity | <=95% |
| Sampling Format | Natural diffusion |
| Alarm format | Audible & Visual alarm, remote alarm(work with alarm host) |
| Sensor | High performance electrochemical sensor |
| Radio Frequency | 915MHz/FSK |
| Measurement | 108*45 mm |
Function Introduction:
For the first time use, the detector should be powered on and preheated for 5 minute.
The Green LED will flash every 500MS during the preheat period. After that, Green
LED will turn to normal on. The red LED flashes every 5 seconds when it's under
working status, and it will send out Intermittent light and sound alarm signal. Press
the test button on the backside to test the detector.
1. LED Introduction
· POWER LED(Green) Normal working status: Green color.
· Alarm LED(Yellow) Normal working status: Red color.
2. Button Introduction
Test button : alarm test
