Model NO.
S1017Y
Type
SemiConductor Gas Sensor
Output Signal Type
Digital Type
Production Process
SemiConductor Integrated
Material
Mems
IP Rating
IP68
Sensitivity
High
Certification
CE FCC RoHS
Customized
Customized
Detect Range
0-400ppm
Response Time
≦15s
Trademark
Rainbow
Transport Package
Standard
Specification
3.8*3.8*1.5mm
Origin
China
HS Code
9026801000
MEMS hydrogen sensor
1. Product description
The MEMS combustible gas sensor uses a unique MEMS process to make a high-temperature resistant micro-hot plate on a Si-based substrate, and uses a self-developed gas-sensing material nano-level metal oxide semiconductor material. When the detected gas exists in the ambient air, the conductivity of the sensor changes. The higher the concentration of the gas, the higher the conductivity of the sensor. Using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the gas concentration. Sensor characteristics This product adopts MEMS technology, has a solid structure and high sensitivity to combustible gas; it has the advantages of small size, low power consumption, high sensitivity, fast response recovery, simple driving circuit, good stability and long life
2.Sensor characteristics
1.High sensitivity to propane (0-2000ppm)2.Quick response (~15Sec.)
3.Very low power consumption (40~45mW)
4.Ultra-small size (3.8mm × 3.8mm × 1.5mm)
5. Long life (~ 5 years)
6.Long-term stability
7.Reflow soldering is possible
8.Product anti-smoke, anti-alcohol, anti-silicon
3.the main application
1.Gas detection in civil, industrial and environmental protection
2. Internet of Things, wearable devices
3.Smart home
2. Internet of Things, wearable devices
3.Smart home
4. Performance parameter
| Model | S1017Y(MEMS) | |||
| Packaging standard | metal | |||
| Detect gas | hydrogen | |||
| Detect range | 0-400PPM(hydrogen) | |||
| Standard circuit | Heating voltage | VH | 3.5±0.1V DC/AC | |
Component characteristics under standard test conditions | Loop voltage | VC | 3.5±0.2V DC | |
| Load Resistance | RL | Adjustable | ||
| Heating chip resistance | RH | 85Ω±10Ω(Room temperature) | ||
| Heating chip current | IH | 15mA | ||
| Heater power consumption | PH | 40-45mW | ||
| Sensitivity change | 0.8V-1.2V | 2000PPM(Propane) | ||
| Under standard test conditions | temperature humidity | 20±2ºC,65±5%RH | ||
| Preheat time | Not less than 24 hours | |||
| Response time | <=15s | |||
| Stripping time | <=30s | |||
Jinan Rainbow Technology Co., Ltd. is a global supplier of smart sensors and IoT monitoring solutions.
The company was established in 2015, registered in Jinan, Shandong, and has a research and development center in New York, USA. Is a trustworthy innovative technology company.
The company's products include memory sensors, sensor modules, IoT transmitters (air quality transmitters and agriculture and animal husbandry transmitters). Rainbow Technology integrates R&D, production and sales, and has established a complete Internet of Things industry chain, closely combining sensors, smart terminals and communication technologies, and constantly emerging new values in production and life.
