Model NO.
X19
Customized
Customized
Pressure Range
0~250PA...10kpa
Pressure Reference
Gauge
Zero Output
±2mv
Span Output
≥30mv
Accuracy
±0.25%F.S.
Excitation
1.5mA
Compensated Temp.
0ºC-50ºC
Operating Temp.
-20ºC-85ºC
Housing and Diaphragm
316L
Oil Filling
Silicon Oil
Transport Package
Standard Export Packing with Carton
Specification
Φ 19× 14mm
Trademark
WTsensor
Origin
China
Type:
SemiConductor Gas Sensor
Conductivity Type:
Non-conductivity Type
Output Signal Type:
Analog Type
Material:
Stainless Steel
Sensitivity:
High
Certification:
CE
Piezoresistive silicon chip employed
X19 OEM Pressure Sensor is a standard and economic pressure sensor applied in clean air pressure measurement. A high sensitivity piezoresistive silicon pressure chip is employed in the transducer. Without oil filling, this kind of sensor has a very good temperature performance. The air measured should be no-aggressive, as air will contact pressure chip directly.
Perfect long term stability
MEMS technology
Cost effectiveX19 OEM Pressure Sensor is a standard and economic pressure sensor applied in clean air pressure measurement. A high sensitivity piezoresistive silicon pressure chip is employed in the transducer. Without oil filling, this kind of sensor has a very good temperature performance. The air measured should be no-aggressive, as air will contact pressure chip directly.
| Pressure range | |
| Pressure range | 250Pa, 1kPa, 2kPa, 4kPa, 6kPa, 8kPa, 10kPa(bar and psi unit available) |
| Pressure reference | Gauge pressure |
| Overpressure | 300%F.S. |
| Output signal | |
| Zero output | ±2mV |
| Span output | ≥30mV(typical) |
| Specification | |
| Accuracy (linearity, repeatability and hysteresis) | ±0.25%F.S. (Typical) |
| Excitation | 1.5mA (Typical) |
| Compensated temp. | 0ºC-50ºC(Typical) |
| Operating temp. | -20ºC-85ºC |
| Storage temp. | -40ºC-125ºC |
| Zero temp. coefficient | 1.5%F.S.(500Pa, 2kPa, 5kPa, 10kPa) | 2%FS(250Pa, 20kPa, 35kPa, 70kPa, 100kPa) | 2.5%FS(1kPa, 7kPa) |
| Span temp. coefficient | 2%F.S. |
| Insulation resistance | >100Mohm/250VDC |
| Input impedance | 2kΩ~5kΩ |
| Long term stability | ≤0.2%F.S.S/year |
| Vibration | 20g (20-5000HZ) |
| Oil filling | Without oil filling |
| O-ring | NBR, Fluorin |
| Housing and diaphragm | Stainless steel 316L |
| Wire connection | 4 wire (typical) | 5 wire (available) 39×φ0.015, Silicon shielded, 200ºC bearing |
| Weight | 25g(approx) |
| Wire connection |
Send Message
