Model NO.
AT01-WL
Sensitivity
High
Certification
CE
Customized
Non-Customized
Weight of The Main Unit
65g
Working Voltage
6-36V
Display
LCD Display
Warning
Automatic Broadcast
Size
Mini Size
Power Consumption
Low
Siren
Sound to Alarm
Installation
Easy
Calibration
Before Use
Transport Package
Standard Exported Box
Specification
62*50*22(mm)
Trademark
We accept OEM service
Origin
Guangzhou, China
HS Code
9026801000
Production Capacity
5000 PCS/Month
Type:
Electrochemical Gas Sensor
Conductivity Type:
Non-conductivity Type
Output Signal Type:
Digital Type
Production Process:
Injection
Material:
Plastic
IP Rating:
IP65
Alcohol Testers with GPS tracker to detect drunken driving-WL
TOPTEN AT01 is a gas alcohol sensor. Using a multilayer thick film manufacturing process, a
TOPTEN AT01 is a gas alcohol sensor. Using a multilayer thick film manufacturing process, a
heater and a metal oxide semiconductor gas-sensitive layer are formed on both sides of a micro
Al2O3 ceramic substrate, which are led out by electrode leads and packaged by a TO-5 metal
casing. When the detected gas exists in the ambient air, the conductivity of the sensor changes.
The higher the concentration of the gas, the higher the conductivity of the sensor. Through the
LCD screen and automatic broadcast of the machine, to test of the alcohol concentration of the
driver and the safe driving of the vehicle.
Features & Functions 1. Low power consumption
2. LCD display to show the alcohol level
3. Automatic broadcast
4. Mini size
5. High sensitivity to low-concentration pollutant gases
6. Easy installation
The Gas can work with the below GPS Tracker---TK108
SpecificationsHow it works
1. DUI(Driving under the influence): default level 90 mg/L
When the sensor detect the level high than 90 mg/L, it will trigger alarm, the sensor will
broadcast:"Warning! Alcohol level is high, it is danger to drive", if the driver keep there and
alcohol keep more than 90mg/L, it will broadcast every 5min. In this mode, the sensor just keep
broadcast to tell the driver its drunk driving, do not trigger other alarm.
2. Drunken Driving: default level 363 mg/L
When the sensor detect the level high than 363 mg/L, it will trigger drunken driving alarm,
the siren make "BIBI" noise sound directly, meanwhile, it will send out stop command to make
car cannot move as long as the car install the relay with alcohol sensor.
The Gas can work with the below GPS Tracker---TK108
| Working voltage: | +6.0 ~+45VDC |
| Power Consumption: | Working current: 50mA; Peak current: 800mA; |
| Inside Backup battery: | Rechargeable 3.7V 500mAh Li-ion battery |
| Size of the main unit: | 62*50*22 (mm) |
| Weight of the main unit: | 65g |
| Working temperature: | -20 ~ 85ºC |
| Humidity: | 0 ~ 95% |
| GSM frequencies: | Quad-band: 850MHz/900MHz/1800MHz/1900MHz |
| GPS chip: | U-blox chipset (or MTK3339) |
| Receiving ways | 20 channels |
| Working frequencies | 1575.42Mhz C/A(GPS) |
| Receiving sensibility | -160dBm |
| Positioning accuracy | ≤10m (wide-open area) |
| Speed accuracy | ≤0.2M/S (wide-open area) |
| Positioning mode | Auto 2D/3D |
| Hot start | 1 sec., average |
| Warm start | 2 sec., average |
| Cold start | 40 sec., average |
Topten Real-time Online tracking system
Send Message
