Engine Oil Pan Replacement for Toyota Camry RAV4 Scion Xb 2.4L 12101-0h050, Oil Pan, Oil Sump

MORE PPRODUCTS

Vehicle Fitment

Compatible with Toyota Models:

• RAV4 2006-2008 L4 2.4L
• Solara 2007-2008 L4 2.4L
• Solara 2006-2006 L4 2.4L From 05/06
• Camry 2007-2011 L4 2.4L Except Japan Built
• Camry 2008-2008 L4 2.4L Engine Serial # Starts With 7,9 OR A
• Camry 2009-2009 L4 2.4L From Engine # AXXXXXX; To Engine A9XXXXX
• Camry 2009-2009 L4 2.4L From Engine # 7XXXXXX; To Engine 9XXXXXX

Compatible with Scion Models:

• xB 2008-2010 L4 2.4L Except Japan Built
• Location: Lower
• OEM Nubmer: 12101-0H050, 12101-0H060, 12101-28060, 264-319
• OE replacement engine oil pan,directly fit
• Fits Scion xB 2008-2010 L4 2.4L Exc.Japan Built; Toyota Camry 2007-2011 Sedan Exc.Japan Built
• Fits Toyota Camry 2007-2009 2.4L, RAV4 2006-2008 2.4L, Solara 2007-2008 2.4L
• Reference Number: 12101-0H050, 12101-0H060, 12101-28060, 264-319
• 1 year unlimited-mileage quality guarantee

We focus on the stamping forming bending welding part for almost 30 years.
Founded in 1992, Started exporting in 2008, which is now covered more than 10000 square meters and with 439 employee.

We fully carry out the TS 16949 quanlity management system with manufactory.Start from raw material incoming inspection to container loading .

Continuous improvemnet:ACT-PLAN-DO -CHECK 

Raw material incoming inspection :
1.Five element analyzer
Automatic five element analyzer carbon sulfur manganese silicon phosphorus chemical element spectrum analyzer
Any type of the element out of specification will Affecting mechanical properties

Raw material incoming inspection :
2.Mechanical Properties
Only tensile strength, yield strength and elongation of raw materials meet the requirements can move into mass productions.

Decoiler
We bought the raw material by coil from the steel company ,we decoiler the steel sheet by ourslef ,which will save the cost and lead time for mass productions.

Laser cutting for the steel sheet 

When produce the sample or the small batch of the product we normally use the laser cutting insted of the stamping blanking.

Tooling mold Prepare
We simulated the workpiece by J-STAMPING software ,then we design the mold for metal sheet part ,not only it short the leadtime for development but also saving the cost for customer.

Mold Workshop Warehouse
We can design and manufacture molds according to customer requirements,2500 square meter special for stamping mold warehouse.

CNC machining center
We introduce 5pcs of CNC machine ,all of them with 5 Axis not only they can produce the mold and tooling but also they can carry out some part of machine job.

The capacity of the CNC machine was :25000*1800*1000mm

Stamping Workshop
Overview of the Stamping workshop with cover the
Stamping equipment   from 100T to 800T.
Hydraulic Press cover from 50T to 3100T.
With the mold(die,tooling) produce by ourselves we can customize all kinds of metal shape according to customer drawing call out.

Bending Workshop
CNC bending machine with servo control precise control the tolerance according to customer requirement.
The capacity of bending diameter reach to Φ135mm.

Welding Workshop

Welding robot with Synchronous workstation introduce from Panasonic Japan ,we had 23pcs welding arm with 64 pcs working stations,sheild welding support by Continuous gas supply station.

Brazing Welding For Pipe
Pipe with brazing welding can get perfect out appearance also reduce leaking on welding area.

Spot Welding (Resistance welding)
The ABB resistance welding robot can improve the welding joint strength also Improve spot welding efficiency.Reduce defects of traditional spot welding.

Surface Treatment
The coating line improves the efficiency, reduces the pollution to the environment, and the wastewater discharge after industrial treatment reaches the national standard.

Salt and spry test 
Each batch of the surface treatment should go though the test before packing and shipment
 

Inspection tooling calibration by CMM
The inspecion calibration was a key job to ensure the quality of working piece.

 

Dimension Inspection 

The mold and inspect gauge also the PPAP part was inspect by the CMM and Handy scanning equipment.

ERP System In Our Company
All data support by ERP System, Cover From Raw Material Incoming To Shipment.

Customer Audit

* Evaluate the quality of customer service.
* Compare the quality with previously established goals.
* Identify gaps for improvement.
* Find ways to improve customer service.
* Gather all of the required data with Live Agent.
* Check activities.

Company Team
Team Working Together For Bright Future

ENJOY THE WORK, ENJOY THE LIFE.