Model NO.
55-250mm
Application
Truck, Car
Certification
CE, SGS
Warranty
12 Months
Color
Silver
Material
Alloy Cast Iron
Type
Cylinder Liner
Trademark
HUAJIN
Transport Package
Neutral Package or OEM Package --- Anti-Rust Paper
Specification
55-250mm
Origin
Dezhou City
HS Code
8409999990
Features
· Special and excellent handling
· Popular new pattern and perfect appearance
· Accurate size
· High tensile strength
· Excellent wear resistance
· Long service life
· Sample will be offered to check our quality
· We passed CNAS; SON; SGS etc certificate
· 300,000 kilometers guarantee
1-26production lines and strong casting ability for cylinder liners;
2- Wet and dry cylinder liners;
3- Slip Fit (F), Press Fit (SF);
4- Their diameters can range from 55 to 250mm;
5- Oxidation phosphor reason and the plasma, laser hardening;
6- DIN/ISO4383 and ISO/TS16949 certificated;
Suzuki Cylinder Liner
Model: ST100A, ST100B, F5A, F6A, F10, F10A, L100, S10P, LJ80, FUTURA
| Model | Specification | price(RMB) | part number | cylinder number |
| MITSUBISHI 4DQ5 | 83*87*162 | 17 | 30607-50301 | 4 |
| MITSUBISHI 4D55 | 90.1*94.1*164.5 | 19 | MD050430 | 4 |
| MITSUBISHI 4D56 | 90.1*94.1*167 | 20 | MD1034648-9 | 4 |
| MITSUBISHI T120SS | 71*76*130 | 11 | 4 | |
| MITSUBISHI 4G41R | 75.5*80.5*128 | 11 | 4 | |
| MITSUBISHI 4D30 | 99*104*196 | 26 | ME011513 | 4 |
| MITSUBISHI 4D31 | 99*104*191.5 | 25.5 | MEO11604-6 | 4 |
| MITSUBISHI 4D34 | 103*108*197.5 | 26.5 | MEO13366-7 | 4 |
| MITSUBISHI 4D32 | 103*108*197.5 | 26.5 | MEO12900 | 4 |
| MITSUBISHI 4D32(New) | 103*107*192 | 26 | MEO12900 | 4 |
| MITSUBISHI 4D35 | 109*114*200 | 28 | 4 | |
| MITSUBISHI 4M40 | 94*99*186 | 25 | ME-200680 | 4 |
| MITSUBISHI 4G54 | 90*95*165 | 23 | 4 | |
| MITSUBISHI 4G63 | 84*89*145 | 18 | 4 | |
| MITSUBISHI 4G64 | 85.5*90.5*160 | 20 | 4 | |
| MITSUBISHI 4D33 | 107*112*197 | 27 | MEO13333 | 4 |
| MITSUBISHI 6D16 F/F | 118*122*204 | 45 | MEO71224 | 6 |
| MITSUBISHI 6D16New F/F | 118*122*206 | 45 | MEO41105-7 | 6 |
| MITSUBISHI 6D14 F/F | 110*122*206 | 50 | MEO31617 | 6 |
| MITSUBISHI 6D15F/F | 113*125*206 | 52 | MEO71041 | 6 |
| MITSUBISHI 6D22F/F | 130*148*261.8 | 90 | MOE051500-3 | 6 |
| MITSUBISHI 8DC9F/F | 135*154*259.7 | 95 | MOE062602-4 | 8 |
| MITSUBISHI L100 | 69*74*135 | 12 | 4 | |
| MITSUBISHI 4G32 | 76*81*150 | 13 | 4 | |
| MITSUBISHI T120SS | 71*76*130 | 11 | 4 | |
| MITSUBISHI 4G33 | 72*77*150 | 15 | 4 | |
| MITSUBISHI 4G92-S | 80*84.5*145 | 16 | 4 | |
| MITSUBISHI 6G72 | 90*95*156.5 | 20 | 4 | |
| MITSUBISHI 4G41R | 75.5*80.5*128 | 13 | 4 | |
| MITSUBISHI 4D62 | 79.5*84.5*145 | 14 | 4 | |
| MITSUBISHI 4G63 | 83*88*150 | 16 | 4 | |
| MITSUBISHI 4G54 | 90*95*165 | 20 | 4 | |
| MITSUBISHI S6E | 93*98*168 | 20.5 | 34407-00301 | 6 |
| MITSUBISHI S4E2 | 97*101*168.5 | 21 | 34407-05400 | 4 |
| MITSUBISHI S4S/S6S | 93*98*190 | 21 | 4\6 | |
| MITSUBISHI S4K/S6K | 101*105*196 | 22 | 34307-00501 | 4\6 |
| MITSUBISHI 4DR5/T210 | 91*95*176 | 23 | 31607-02202 | 4 |
| MITSUBISHI 6DR5 | 91*95*176 | 23 | 31607-02101-2 | 6 |
| MITSUBISHI 4DR5 1/16 | 91*96*176 | 24 | 4 | |
| MITSUBISHI 4DR5 1/8 | 91*95*176 | 23 | 4 | |
| MITSUBISHI 4DR5 3/32 | 91*98.35*176 | 25 | 4 | |
| MITSUBISHI 4DR7 | 94*98*186 | 25 | 4 |
1)Wet cylinder
The location bores and particularly the running surfaces in the cylinder block must be cleaned carefully and they must be undamaged. Corroded surfaces must be reworked (used flange liners and outer diameter oversize liners). As this is done, make sure that the liners moves in easily and that they take up the correct position (the projecting length of the liner must be in accordance with the regulations of the engine manufacture). After the liner has been installed with the seat rings that belong to it.
(use slip agent), the cylinder diameter is to be checked particularly in the region of seal rings so as to determine whether any deformation has been caused by pinched sealing rings. Using the wrong sealing rings (wrong diameter/ wrong materials) can a narrowing of the cylinder which can lead to engine damage.The cooling system should be pressure tested after the liners have been installed so as to determine whether there is any leakage before the engine is started.
2)Semi-finished cylinder liner
The surface which supports the flange must be vertical to the location bore and it must be sufficiently and evenly beveled. If the liner flange is unevenly supported it can tear off. After the installation of the liner, which is only semi-finished in its inside diameter, this cylinder boring is finely bored and then finished by honing until it has the specified dimensions or, in the case of finely bored liner.It is only finished by honing (tolerance accordingly to DIN ISO H5). The surface of the liner must be flush to the sealing surface of the cylinder block, if necessary,the block surface and the liner must be finished by surface grinding.
3)Finished Cylinder liner
Before the liner is installed, the location bore in the cylinder block must be cleaned carefully and must be checked to ensure the accuracy of the dimensions and to determine whether any distortion has occurred. Out of center or damaged bores can be reworked for the installation of oversize liners. It is important for this that the locating bore is cylindrical, as this is what determines the geometrical shape of the inside of the pressed in, thin walled liner.
4)Air cooling cylinder liner
In accordance with the instructions from the engine manufacture, cast iron cylinders or light alloy cylinders are used.
Light alloy cylinders are separated into several groups due to the small installation clearance in the standard cylinder dimensions
FAQ
1. Are you a factory or a trading company?
Established in 1995s,Yucheng Huajin Cylinder Liner Factory is a professional manufacturer of cylinder liners for the automobiles and other vehicles.
2. Is OEM available?
Yes, OEM is available. We have professional designer to help your brand promotion.
3. Is the sample available?
Yes, samples are available for you to test the quality.
4. Are the products tested before shipping?
Yes, all of our cylinder sleeves / liners were inspected piece by piece and they are all qualified before shipping.
5. What's your quality guarantee?
Our cylinder sleeves / liners accord with GB/T 3177-2009, GB/T231.1-2009 standard.
We have 100% quality guarantee to customers. We will be responsible for any quality problem.
6. What's benefit will you bring?
Your clients will be satisfied wih the quality.
Your clients will continue orders.
You can get good reputation from your market and obtain more orders.
We continuously improve ourselves in quality and service to the market through an aggressive endeavor. We warmly welcome customers from at home and abroad to cooperate with us for common success.
Contact: Nancy Qiu
Web: huajingangtao.en.made-in-china.com
Yucheng Huajin Cylinder Liner Factory
Yucheng city,Shandong Province, China
Web: huajingangtao.en.made-in-china.com
Yucheng Huajin Cylinder Liner Factory
Yucheng city,Shandong Province, China
