Model NO.
HUAJIN
Transport Package
Carton
Specification
50-300mm
Trademark
LIANSHENG
Origin
Dezhou
HS Code
8409999990
Production Capacity
50000PCS/Month
Application:
Excavator, Lawnmower, Tractor, Ke Tan, Boat, Motorbike, Truck, Car
Certification:
ISO 9001, CE
Warranty:
24 Months
Color:
Silver
Material:
Cast Iron
Type:
Dry Cylinder Liner
Auto engine part for Toyota Cylinder Liners
Features
· Special and excellent handling
· Popular new pattern and perfect appearance
· Accurate size
· High tensile strength
· Excellent wear resistance
· Long service life
· Sample will be offered to check our quality
· We passed CNAS; SON; SGS etc certificate
· 300,000 kilometers guarantee
1-26production lines and strong casting ability for cylinder liners;
2- Wet and dry cylinder liners;
3- Slip Fit (F), Press Fit (SF);
4- Their diameters can range from 55 to 250mm;
5- Oxidation phosphor reason and the plasma, laser hardening;
6- DIN/ISO4383 and ISO/TS16949 certificated;
1)Wet cylinder
The location bores and particularly the running surfaces in the cylinder block must be cleaned carefully and they must be undamaged. Corroded surfaces must be reworked (used flange liners and outer diameter oversize liners). As this is done, make sure that the liners moves in easily and that they take up the correct position (the projecting length of the liner must be in accordance with the regulations of the engine manufacture). After the liner has been installed with the seat rings that belong to it.
(use slip agent), the cylinder diameter is to be checked particularly in the region of seal rings so as to determine whether any deformation has been caused by pinched sealing rings. Using the wrong sealing rings (wrong diameter/ wrong materials) can a narrowing of the cylinder which can lead to engine damage.The cooling system should be pressure tested after the liners have been installed so as to determine whether there is any leakage before the engine is started.
2)Semi-finished cylinder liner
The surface which supports the flange must be vertical to the location bore and it must be sufficiently and evenly beveled. If the liner flange is unevenly supported it can tear off. After the installation of the liner, which is only semi-finished in its inside diameter, this cylinder boring is finely bored and then finished by honing until it has the specified dimensions or, in the case of finely bored liner.It is only finished by honing (tolerance accordingly to DIN ISO H5). The surface of the liner must be flush to the sealing surface of the cylinder block, if necessary,the block surface and the liner must be finished by surface grinding.
3)Finished Cylinder liner
Before the liner is installed, the location bore in the cylinder block must be cleaned carefully and must be checked to ensure the accuracy of the dimensions and to determine whether any distortion has occurred. Out of center or damaged bores can be reworked for the installation of oversize liners. It is important for this that the locating bore is cylindrical, as this is what determines the geometrical shape of the inside of the pressed in, thin walled liner.
4)Air cooling cylinder liner
In accordance with the instructions from the engine manufacture, cast iron cylinders or light alloy cylinders are used.
Light alloy cylinders are separated into several groups due to the small installation clearance in the standard cylinder dimensions
FAQ
1. Are you a factory or a trading company?
Established in 1995s,Yucheng Huajin Cylinder Liner Factory is a professional manufacturer of cylinder liners for the automobiles and other vehicles.
2. Is OEM available?
Yes, OEM is available. We have professional designer to help your brand promotion.
3. Is the sample available?
Yes, samples are available for you to test the quality.
4. Are the products tested before shipping?
Yes, all of our cylinder sleeves / liners were inspected piece by piece and they are all qualified before shipping.
5. What's your quality guarantee?
Our cylinder sleeves / liners accord with GB/T 3177-2009, GB/T231.1-2009 standard.
We have 100% quality guarantee to customers. We will be responsible for any quality problem.
6. What's benefit will you bring?
Your clients will be satisfied wih the quality.
Your clients will continue orders.
You can get good reputation from your market and obtain more orders.
We continuously improve ourselves in quality and service to the market through an aggressive endeavor. We warmly welcome customers from at home and abroad to cooperate with us for common success.
Features
· Special and excellent handling
· Popular new pattern and perfect appearance
· Accurate size
· High tensile strength
· Excellent wear resistance
· Long service life
· Sample will be offered to check our quality
· We passed CNAS; SON; SGS etc certificate
· 300,000 kilometers guarantee
1-26production lines and strong casting ability for cylinder liners;
2- Wet and dry cylinder liners;
3- Slip Fit (F), Press Fit (SF);
4- Their diameters can range from 55 to 250mm;
5- Oxidation phosphor reason and the plasma, laser hardening;
6- DIN/ISO4383 and ISO/TS16949 certificated;
1)Wet cylinder
The location bores and particularly the running surfaces in the cylinder block must be cleaned carefully and they must be undamaged. Corroded surfaces must be reworked (used flange liners and outer diameter oversize liners). As this is done, make sure that the liners moves in easily and that they take up the correct position (the projecting length of the liner must be in accordance with the regulations of the engine manufacture). After the liner has been installed with the seat rings that belong to it.
(use slip agent), the cylinder diameter is to be checked particularly in the region of seal rings so as to determine whether any deformation has been caused by pinched sealing rings. Using the wrong sealing rings (wrong diameter/ wrong materials) can a narrowing of the cylinder which can lead to engine damage.The cooling system should be pressure tested after the liners have been installed so as to determine whether there is any leakage before the engine is started.
2)Semi-finished cylinder liner
The surface which supports the flange must be vertical to the location bore and it must be sufficiently and evenly beveled. If the liner flange is unevenly supported it can tear off. After the installation of the liner, which is only semi-finished in its inside diameter, this cylinder boring is finely bored and then finished by honing until it has the specified dimensions or, in the case of finely bored liner.It is only finished by honing (tolerance accordingly to DIN ISO H5). The surface of the liner must be flush to the sealing surface of the cylinder block, if necessary,the block surface and the liner must be finished by surface grinding.
3)Finished Cylinder liner
Before the liner is installed, the location bore in the cylinder block must be cleaned carefully and must be checked to ensure the accuracy of the dimensions and to determine whether any distortion has occurred. Out of center or damaged bores can be reworked for the installation of oversize liners. It is important for this that the locating bore is cylindrical, as this is what determines the geometrical shape of the inside of the pressed in, thin walled liner.
4)Air cooling cylinder liner
In accordance with the instructions from the engine manufacture, cast iron cylinders or light alloy cylinders are used.
Light alloy cylinders are separated into several groups due to the small installation clearance in the standard cylinder dimensions
| Model | Specification | price(RMB) | part number | cylinder number |
| TOYOTA 5K | 79.5*84.5*146 | 14 | 4 | |
| TOYOTA 5E/EL53 | 74*78*140 | 13 | 11461-11101 | 4 |
| TOYOTA GA16/E15 | 74*78*140 | 13 | 4 | |
| TOYOTA 4K | 74*79*135 | 11.5 | 11461-24010 | 4 |
| TOYOTA 3K | 74*79*122 | 11.5 | 4 | |
| TOYOTA 3A | 76*81*150 | 14 | 4 | |
| TOYOTA 4G32 | 76*81*145 | 14 | 4 | |
| TOYOTA 4M | 79*84*150 | 15 | 6 | |
| TOYOTA 12R | 79.5*84.5*144 | 14 | 11461-31021 | 4 |
| TOYOTA 3A | 76*81*150 | 14.5 | 4 | |
| TOYOTA 5A | 78*83*180 | 22 | 4 | |
| TOYOTA 4A | 80*85*150 | 15 | 4 | |
| TPYOTA E2 | 72*77*180 | 21.5 | 4 | |
| TOYOTA 5M | 82*87*150 | 15 | 6 | |
| TOYPTA 18R | 87.5*92.5*180 | 22.5 | 4 | |
| TOYOTA 21R | 83*88*148 | 15 | 11461-37030 | 4 |
| TOYOTA 3Y | 85*90*145 | 15 | 11461-71010 | 4 |
| TOYOTA 2Y | 85*90*145 | 15.5 | 4 | |
| TOYOTA 1RZ | 85*90*155 | 16.5 | 11461-75090 | 4 |
| TOYOTA 2C | 85*90*170 | 20 | 11461-64090 | 4 |
| TOYOTA 18R | 87.5*92.5*180 | 20.5 | 4 | |
| TOYOTA 20R | 87*92*142 | 16 | 4 | |
| TOYOTA IN | 73*78*145 | 15 | 4 | |
| TOYOTA 5R | 87*92*150 | 16 | 4 | |
| TOYOTA 2J/H | 87*93*183 | 23 | 11461-48011 | |
| TOYOTA L/LH11 | 89*94*160.5 | 20 | 11461-54010 | 4 |
| TOYOTA J | 87*93*182 | 23 | 11461-48010 | 4 |
| TOYOTA 4Y | 90*95*142 | 16 | 4 | |
| TOYOTA V22H/L14 | 87*93*182 | 23 | 11461-48011 | 4 |
| TOYOTA 2H | 90*95*184 | 24 | 11461-68010 | 6 |
| TOYOTA 1ZR | 93*98*169 | 24 | 4 | |
| TOYOTA 22R | 91*96*160 | 21 | 11461-35030 | 4 |
| TOYOTA 2L | 91*96*160.5 | 21 | 11461-54060 | 4 |
| TOYOTA 5L | 97.5*103*190 | 28 | 11461-54120 | 4 |
| TOYOTA 2L(NEW) | 91*96*179.5 | 23 | 11462-54070 | 4 |
| TOYOTA 3F | 93*99*170 | 22.5 | 11461-61030 | 6 |
| TOYOTA 2F | 93*99*190 | 24 | 11461-61010 | 6 |
| TOYOTA 1HZ | 93*98*168.5 | 23 | 11461-17010 | 6 |
| TOYOTA 2RZ | 94*99*145 | 22 | 4 | |
| TOYOTA BU30/B(UEW) | 94*102*190 | 30 | 11461-56030 | 4 |
| TOYOTA 1FZFE | 99*104*156.5 | 22 | 4 | |
| TOYOTA 2E | 73*79*145 | 15 | 4 | |
| TOYOTA 4A-S | 80*84.5*145 | 16 | 4 | |
| TOYOTA D15B | 74*78*145 | 15 | 4 | |
| TOYOTA B5 | 77*82*145 | 16 | 4 | |
| TOYOTA B3 | 70*74*135 | 14 | 4 | |
| TOYOTA 11B | 94*99*192 | 26 | 4 | |
| TOYOTA 3L | 95*100*190 | 28 | 11461-5400 | 4 |
| TOYOTA 1Z/11Z/12Z | 95*100*182.5 | 28 | 11461-78300 | 46 |
| TOYOTA 1DZ | 85.5*89*175 | 22.5 | 4 | |
| TOYOTA 2Z | 97.5*101*181.5 | 27 | 4 | |
| TOYOTA 2KD | 91*96*170 | 22 | 4 | |
| TOYOTA 2B | 97*102*190 | 28 | 11461-57010 | 4 |
| TOYOTA 13B | 101*106*188 | 27 | 11461-58020 | 4 |
| TOYOTA 3B | 101*106*190.5 | 28 | 11461-58010 | 4 |
| TOYOTA 14B | 101*106*196 | 28 | 11462-58040 | 4 |
| TOYOTA B(Old) | 94*100*190 | 28 | 11461-56010 | 4 |
| TOYOTA B | 94*99*190 | 28 | 11461-56020 | 4 |
| TOYOTA HA | 94*98.5*189 | 27 | 4 | |
| TOYOTA 2R FGM(NEW) | 77*82*160 | 18 | 4 | |
| TOYOTA R2 | 84*89*180 | 23 | 4 | |
| TOYOTA WONDER1N | 73*78*150 | 15 | 4 | |
| TOYOTA VITARA | 74*79*150 | 15 | 4 | |
| TOYOTA ACCORD | 82*90*150 | 18 | 4 | |
| TOYOTA 2H/1E | 90*94*184 | 23 | 11461-96601 | 6 |
| TOYOTA AVANZA1.3 | 71*75*130 | 14 | 4 | |
| TOYOTA AVANZA1.5 | 71*75*150 | 15 | 4 |
FAQ
1. Are you a factory or a trading company?
Established in 1995s,Yucheng Huajin Cylinder Liner Factory is a professional manufacturer of cylinder liners for the automobiles and other vehicles.
2. Is OEM available?
Yes, OEM is available. We have professional designer to help your brand promotion.
3. Is the sample available?
Yes, samples are available for you to test the quality.
4. Are the products tested before shipping?
Yes, all of our cylinder sleeves / liners were inspected piece by piece and they are all qualified before shipping.
5. What's your quality guarantee?
Our cylinder sleeves / liners accord with GB/T 3177-2009, GB/T231.1-2009 standard.
We have 100% quality guarantee to customers. We will be responsible for any quality problem.
6. What's benefit will you bring?
Your clients will be satisfied wih the quality.
Your clients will continue orders.
You can get good reputation from your market and obtain more orders.
We continuously improve ourselves in quality and service to the market through an aggressive endeavor. We warmly welcome customers from at home and abroad to cooperate with us for common success.
Send Message
