Model NO.
4TNV98
Cylinder
Multi-cylinder
Fuel Saver Type
Electronic
Carburettor Type
Downdraft
Size
15*20*15
Color
Black
Transport Package
35*26*46
Specification
25*30*35
Trademark
china lutong
Origin
China
HS Code
84099199
Production Capacity
20000
Car Make:
WuLing
Fuel:
Diesel
Body Material:
Aluminium
Component:
Fuel Injection Device
Certification:
ISO9001
Stroke:
4 Stroke
Distributor head with high-pressure pump 4TNV98 X.4 ZNSAD injector pump
4TNV98 - 68.5HP
TNV SERIES 13.3-83.8HP
4TNV98 -69.5HP @ 2500RPM
ENGINE FEATURES:
Lower exhaust emission
Low noise and vibration
Compact, Easy to start and operation
Fuel efficient
Durable and reliable due to designed fuel injection valve and fuel injection pump.
On 4TNV98 by using 2 inlet and 2 exhaust valves, air intake and expulsion is markedly improved. Vertically mounted injector nozzie minimized imbalance of spray pattern.
Performance Curve
OPTIONS
INDUSTRIAL VARIABLE SPEED - 68.5HP @ 2500 RPM
GENERATOR DRIVE - 46.4 @ 1500 RPM
IRRIGATION PACKS - 68.5 @ 2500 RPM.
4TNV98IP with raditor, air cleaner, muffler, speed controller, engine protection controller, vibration resilient mounts, skid base and battery leads.
For IP Pack Information, please click here.
EMISSION REDUCTION
Cleaner engines with even lower exhaust emissions are achieved by improving on the already excellent TNE base. Stricter emissions standards are cleared by a wide margin.
NOZZLE INSULATION ANGLE
The installation angle of the fuel injection nozzle is greater than that in conventional engines, so that uneven atomization of fuel between injections can be reduced. Excellent matching between intake swirl ratio and the shape of the combustion chamber has resulted in uniform mixing of fuel in the combustion chamber.
Performance improved such as:
Combustion efficiency
Startability
Noise
Exhaust emission
COMBUSTION CHAMBER
It increase the fluid energy of the air and fuel charge. The swirl effect produced in the chamber continues while combustion occurs, aiding mixing and results in lower exhaust emissions compared to conventional chambers.
FUEL INJECTION EQUIPMENT
A new MP pump has been developed to make improvements over a wide range of areas to even further reduce emissions.
High-injection pressure
Use of a mono plunger reduces uneven injection between cylinders
New mechanical governor maintain cleaner exhausts
Minimal variation from chosen revs at low speed using constant pressure valve.
FUEL INJECTION NOZZLE
Multiple numbers of very small holes are used to achieve uniform atomization.
Holes are not simple drilled, their inside edges are carefully rounded to promote even flow and direction of spray, also to reduce resistance.
Low sack nozzle profile improves combustion. Double corn shape protects from cavitation
NOISE LEVEL REDUCTION
Cylinder Block Noise Reduction. Yanmar's original CAE techniques have optimized the stiffness, minimized transformation and reduced radiant noise.
Original CAE technique is used to design a muffler with optimized volumes and sound isolation materials.
4TNV98 from china lutong part plant
China-Lutong VE-Type Injection Pump - Quality Oriented, Keep Improving
With the 20 years of industrial manufacturing experience, China Lutong Parts Plant own advanced technology, standardized production processes and high service in the field of automotive fuel injection system. Therefore, our products and services are highly recognized and accepted by the market. In recent years, we are committed to the VE-type distribution pump's research and upgrading. VE pump has an irreplaceable advantage for diesel engine, and electronic control VE pump for tractors, forklifts, other agricultural machinery and engineering machinery are more and more attention by the industry.
JU
nicole
Whats@pp:+86 133 5853 9802
E-mail:nicole at china-luong.net
4TNV98 - 68.5HP
TNV SERIES 13.3-83.8HP
4TNV98 -69.5HP @ 2500RPM
ENGINE FEATURES:
Lower exhaust emission
Low noise and vibration
Compact, Easy to start and operation
Fuel efficient
Durable and reliable due to designed fuel injection valve and fuel injection pump.
On 4TNV98 by using 2 inlet and 2 exhaust valves, air intake and expulsion is markedly improved. Vertically mounted injector nozzie minimized imbalance of spray pattern.
Performance Curve
OPTIONS
INDUSTRIAL VARIABLE SPEED - 68.5HP @ 2500 RPM
GENERATOR DRIVE - 46.4 @ 1500 RPM
IRRIGATION PACKS - 68.5 @ 2500 RPM.
4TNV98IP with raditor, air cleaner, muffler, speed controller, engine protection controller, vibration resilient mounts, skid base and battery leads.
For IP Pack Information, please click here.
EMISSION REDUCTION
Cleaner engines with even lower exhaust emissions are achieved by improving on the already excellent TNE base. Stricter emissions standards are cleared by a wide margin.
NOZZLE INSULATION ANGLE
The installation angle of the fuel injection nozzle is greater than that in conventional engines, so that uneven atomization of fuel between injections can be reduced. Excellent matching between intake swirl ratio and the shape of the combustion chamber has resulted in uniform mixing of fuel in the combustion chamber.
Performance improved such as:
Combustion efficiency
Startability
Noise
Exhaust emission
COMBUSTION CHAMBER
It increase the fluid energy of the air and fuel charge. The swirl effect produced in the chamber continues while combustion occurs, aiding mixing and results in lower exhaust emissions compared to conventional chambers.
FUEL INJECTION EQUIPMENT
A new MP pump has been developed to make improvements over a wide range of areas to even further reduce emissions.
High-injection pressure
Use of a mono plunger reduces uneven injection between cylinders
New mechanical governor maintain cleaner exhausts
Minimal variation from chosen revs at low speed using constant pressure valve.
FUEL INJECTION NOZZLE
Multiple numbers of very small holes are used to achieve uniform atomization.
Holes are not simple drilled, their inside edges are carefully rounded to promote even flow and direction of spray, also to reduce resistance.
Low sack nozzle profile improves combustion. Double corn shape protects from cavitation
NOISE LEVEL REDUCTION
Cylinder Block Noise Reduction. Yanmar's original CAE techniques have optimized the stiffness, minimized transformation and reduced radiant noise.
Original CAE technique is used to design a muffler with optimized volumes and sound isolation materials.
4TNV98 from china lutong part plant
China-Lutong VE-Type Injection Pump - Quality Oriented, Keep Improving
With the 20 years of industrial manufacturing experience, China Lutong Parts Plant own advanced technology, standardized production processes and high service in the field of automotive fuel injection system. Therefore, our products and services are highly recognized and accepted by the market. In recent years, we are committed to the VE-type distribution pump's research and upgrading. VE pump has an irreplaceable advantage for diesel engine, and electronic control VE pump for tractors, forklifts, other agricultural machinery and engineering machinery are more and more attention by the industry.
JU
nicole
Whats@pp:+86 133 5853 9802
E-mail:nicole at china-luong.net
| 4TNV98-A | 4TNV98 |
| 4TNV98-C | 4TNV98 |
| 4TNV98-B | 4TNV98 |
| 4TNV98-B | 4TNV98 |
| 4TNV98-D | 4TNV98 |
| 4TNV98-B | 4TNV98 |
| 4TNV98 | 4TNV98 |
| 4TNV98-A | 4TNV98 |
| 4TNV98-B | 4TNV98 |
| 4D88,4TNE88,4TNV | 4D88,4TNE88,4TNV88 |
| 4D88,4TNE88,4TNV | 4D88,4TNE88,4TNV88 |
Send Message
