Model NO.
095000-0720
Fuel Saver Type
Use Water as Raw Material
Carburettor Type
Downdraft
Transportation Time
3-7 Days
Customizable
Support Customization
Model
095000-0720
Color
Black Silver
Transport Package
Carton
Trademark
DENSO
Origin
China
HS Code
8424899990
Production Capacity
50000pieces
Fuel:
Diesel
Body Material:
Steel
Component:
Fuel Injection Device
Certification:
ISO9001, TS16949, CE, E-Mark, CCC, RoHS, COP
Stroke:
4 Stroke
Cylinder:
Multi-cylinder
| The engine | The diesel engine |
| Parts | The nozzle,nozzle |
| specifications | standard |
| The origin of | Shandong, China (Mainland) |
| Transport packaging | Bulk, carton |
| sample | can |
| Accessories type | Direct replacement |
| transport | logistics |
| Production capacity | 50000 pieces/month |
1. Is this product new?All our products are brand new and original, so each product can be strictly tested, please rest assured to buy
2. Do you offer custom designs?
Custom design is support for customization. We have very rich experience in product customization.
3. Delivery time?
It can be shipped on the same day, special models need to be customized by the factory, we will ship within 15-30 days, without affecting the delivery time. If you have any questions or concerns, please contact us directly for assistance.
4. How to clean the injector?
(1) Remove the injector from the engine;
(2) Connect the carburetor to clean the fuel tank and the fuel injector with a special connector;
(3) Inject the carburetor cleaner into the fuel injector, and check whether the fuel injector leaks when it is not powered on;
(4) Intermittently energize the electromagnetic coil of the fuel injector, let the carburetor cleaner clean the fuel injector, and observe its spray atomization at the same time.
5. How to test the injector?
Detect dripping water from the injector. Select the connector of the tester according to the fuel injector model and connect it well, then check the sealing O-ring group (replace if found damaged), install the fuel injector on the test stand, press the fuel pump button, and adjust the pressure to the vehicle under test Factory specified pressure (preferably higher than 10%), observe whether the injector drips oil. If the leakage is more than one drop within 1min (or according to the technical standard), replace the fuel injector.
Send Message
