Self balancing scooter Hoverboard Pink
Parameter
Range:20 KM
Speed:12KM/H
Speed Warning:Beep+Rising
Angel:25 degree
Load:130kg
Weight:10.5kg
Woring Tem:-10°C to 70°C
Turning radius: 0M
Motor Power:350W/pcs
Battery capacity: 4.4A
Battery voltage: 36V
Battery power: 158W/ watts
Battery indicator: LED light
Charging time: 1-2 hours
Charging temperature: 0 - 45 degrees
Protection: Overload
Charger: 50-60Hz 90-240V
Specifications
performance: IP65
Body material: ABS+PC
Vehicle size: 58cm*17cm*18cm
Body height: 17cm
Chassis height: 3cm
Pedal height: 11cm
Tire type: solid tyre
Tire size: 6.5 inches (17cm)
Package size: 66cm*26cm*26cm
Gross weight: 12kg
Accessory: body, charger, manual, remote control (remote control version only)
PREPARATION
1,Check the seitch of the handle/skateboard in place,as the diagram;
a,the handle power switch is in the off state.
b,put the switch of''Forward/Backward'' mode to ''Forward'' mode on the handle.
c,put the switch of''Slow/Fast'' mode to ''Slow''mode on the handle
d,put the ''Skateboard Power switch''in off state,
2,Install 2 AAA batteries in the handle,as the diagram;
3,The skateboard should be fully charged before first use.
POWER
1,Open the slide the power switch ,power slide battery indicator lights,the bluetooth indicator light
2,Bluetooth indicator on the battery box from''steady''state to ''flicker'' skate, the handle and slide automatic connection is successful,
3,Normal operations can be carried out between the handle and slide.
POWER INDICATOR
Open skateboard the main power switch on the battery case 4 different power indicator light hair representatives present remaining battery power,as follows''
power indicato light,
Three Green led;100%-75%
Two Green led:75%-50%
One Green led: 50%-25%
One Green and Red LED:25%-0%
One Red LED:Low voltage protection,
