The core material of these oxygen sensors are ZrO2 ceramics which has characteristic of high hardness but brittle. It can easily get damaged by physical hits. For example, dropping the sensor to ground will maintenance. In this case, the car engine fault light would light up.
Some of the newer models uses resistance to warm up sensor chip for speed up the operating. These resistance be easily burnt or melt in extreme situation. Which will than cause the oxygen sensor can't reach working temperature.
The exhaust gas could also cause contamination to oxygen sensor. There are mainly three types of contamination could happen: Silicon, Lead and Carbon. These compounds can accumulate and stick to the prob and limit air flow into and out to the sensor.
1. Industry certificate: IATF16949, CE;
2. Complete products, 99% of the world's models of oxygen sensors are produced, and there are more than 2,000 product models;
3. Master the core and check the quality from the source. The core components of the oxygen sensor, the zirconium tube and the chip core, are independently produced by our company, and the raw materials (zirconium powder, platinum paste, etc.) are imported raw materials, and adhere to the principle of quality first;
4. The inspection is fine, all products need to go through 100% inspection, the inspection items include: air tightness test, signal sensitivity test, engine simulation loading test, pressure test, salt spray test, etc., to ensure that each one is a high-quality product;
5. Senior technical team, we have Professor Xie Guangyuan Xie, a professor of materials science from Huazhong University of Science and Technology as the company's technical guide, and have long-term technical exchanges and cooperation with the automotive oxygen sensor research team of Wuhan University of Science and Technology. This industry is going more stable and farther;
6. A complete quality control system, we have high-end equipment for the production and manufacture of oxygen sensor products, and the level of automation equipment is the first in China;
7. The delivery time is short. Our current output of oxygen sensors is 60,000 pieces per month, which can meet the customer's order needs and provide timely and efficient supply capacity;
8. High-quality after-sales service, we have a professional technical and sales team to answer customers as soon as possible; with our more than ten years of production and sales experience, we have accumulated demand information for oxygen sensor products in various markets and possible For difficult problems, we can provide customers with solutions in a timely and accurate manner to maximize the interests of customers
Q: What port do you load from?
A: As your request,main from Shenzhen, Shanghai ,Ningbo.
Q: Can I get the free samples?
A: Thank you for your request, sorry to tell you that we have to charge samples fee. As you know, there are lots of customers request samples, it's a big burden for us every year. we expect to make long and mutually beneficial business relationship with you.The cost will deduct from the final amount in the bulk purchase.
Q: what is your lead time?
A: Lead time according the order product and quantity,as normal 15-25 days,we will try our best to ahead of schedule.
Q: what is your MOV?
A: one order value :RMB30000, USD3500.0
Q: maybe you have a video of your factory?
A: Yes , this is our company presentation ,and I will send some videos of products under production for your reference
Q: Do you think you could make a video call to me to can see the factory? It would be something short so I would be more secure, you already know for the confidence.
A: No problem,If it is convenient for you now, I call you to check it immediately.
