Outlet water pipe: Thickened PVC transparent steel wire hose, You can see the filter effect.
Gloves:2 sets of high-temperature-resistant gloves.
10 Micron Filter: Intercept carbon ash during cleaning.
Inlet water pipe:10 Meters Thickened and reinforced new PVC material water pipe.
10 meters power cord: Bendable, flame retardant PVC, high-precision oxygen-free copper core power cord.
DPF6.0 is the fast and 100% cleaning DPF machine
At present, automobile emission standards are relatively strict, so basically all diesel engines such as trucks and trucks must be installed with DPF (Diesel Particulate Filter), DOC (Diesel Oxidation Catalysts), SCR (Selective Reduction Catalysts) to reduce exhaust emissions. In general, in order to regenerate a filter that continuously accumulates soot, it is necessary to burn off carbon deposits by raising the temperature of the exhaust gas at the filter inlet. However, when the equipment cannot be actively regenerated and product alarms, manual intervention is required.
The high-pressure air in the high-pressure gas storage tank is released instanta ously. Using the top water of the air, the compressed water is generated to generate potential energy, and the blockage inside the honeycomb carrier is pushed out instantly.
- After the circulating water is flushed, the bottom of the DPF and the honeycomb mesh are filled with water.
- The high-pressure gas in the high-pressure air storage tank is instantly rel sed, and the water under pressure by the high-pressure air will instantly push out the hydrogen sulfate and ammonia bicarbonate composite blockage adsorbed inside the honeycomb mesh.
This process will cycle three times( Can be set according to the DPF degree of clogging ). So that can remove all the blockage out from filter. It can reach nearly 100% cleaning efficiently.
