Model NO.
#9 series studs
Transport Package
Carton or Wooden Case
Specification
9-10, 9-11...16
Trademark
Jinxin
Origin
China
Production Capacity
4000000PCS/Month
After-sales Service:
Any Time
Warranty:
Can Discuss
Color:
Customized
Jinxin Tire Studs Features:
1.This kind of Tire Studs are suitable for most of tires and add ultimate off-road capacity to your ordinary ATV, UTV or 4 x 4
vehicles. It brings a good anti-slip property for your tires
2.Made of hard metal, these kind of tire stud screws are strong and durable in use
3.It has a low ground pressure and it is environmentally with minimum impact
4.It is easy to install with our professional drill and can match well with your vehicle tires,it can also be disassembled
according to the reason, When not in use,it could be removed lightly and stored for using again in the following season.
5.Please choose appropriate size of new studs in the installation process in terms of the depth of tire thread
Jinxin Tire Studs Installation:
1. Drill (using a very small bit) down from the center of chosen knob into the tire.
2. Drill a screw up from inside to out. If the angle isn't perpendicular to the tire, it will stick out one side or the other.
3. Do one hole and screw at a time. Put duct tape over the screws on the inside of the tire. Sometimes it is best to use two
layers of tape.
Jinxin Company Note:
1.Please allow +/-0.5mm error due to manual measurement. pls make sure you do not mind before you did
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
3.About Package,the number of products may be greater or less than the actually pieces, rather than the exact number, within 5 pieces.
4. It is easy to install, but professional installation is highly recommended.
1.This kind of Tire Studs are suitable for most of tires and add ultimate off-road capacity to your ordinary ATV, UTV or 4 x 4
vehicles. It brings a good anti-slip property for your tires
2.Made of hard metal, these kind of tire stud screws are strong and durable in use
3.It has a low ground pressure and it is environmentally with minimum impact
4.It is easy to install with our professional drill and can match well with your vehicle tires,it can also be disassembled
according to the reason, When not in use,it could be removed lightly and stored for using again in the following season.
5.Please choose appropriate size of new studs in the installation process in terms of the depth of tire thread
Jinxin Tire Studs Installation:
1. Drill (using a very small bit) down from the center of chosen knob into the tire.
2. Drill a screw up from inside to out. If the angle isn't perpendicular to the tire, it will stick out one side or the other.
3. Do one hole and screw at a time. Put duct tape over the screws on the inside of the tire. Sometimes it is best to use two
layers of tape.
Jinxin Company Note:
1.Please allow +/-0.5mm error due to manual measurement. pls make sure you do not mind before you did
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
3.About Package,the number of products may be greater or less than the actually pieces, rather than the exact number, within 5 pieces.
4. It is easy to install, but professional installation is highly recommended.
Send Message
