Double Temperature and Double Control Portable Cooler Refrigerator 40L, Car Refrigerator, Mini Fridge

Double Temperature And Double Control Portable Cooler Refrigerator 40L 

 


Product details



Product features:
1. High efficiency and energy-saving DC compressor and conversion module are adopted, with high reliability, long service life and fast refrigeration speed of refrigerator.
2. The fluorine-free insulation layer is adopted, which has good new heat preservation and low energy consumption.
3. Dual use of home and car, using 12 / 24V on-board or domestic 220V power supply.
4. Rapid ultra-low cooling to - 20 ° C. (test ambient temperature is 25 ° C)
5. Intelligent battery protection function, protect your car battery
6. Special automobile battery intelligent protection system 7. Large range electronic temperature control

Storage Tips
1. Fresh food and frozen food should not be stored together. The cold of frozen goods will affect the interior of fresh goods
2. When the device is set at 0 ° or lower temperature, do not store glass bottles or liquids (such as beer, milk, juice or soft drinks) in the device, because these may freeze and break.
3. Fruits, vegetables and other items should be stored near the top of the cupboard because the area is usually slightly hot. This will reduce the risk of spokes and ensure that damage is not caused by crushing of heavier items.
4. In order to improve the efficiency of the refrigerator / freezer, it is better to fill it as much as possible at any time. Full cabinet can provide lower power consumption in 24 hours than a half empty cabinet. When filled, the air space between the goods is very small, so the cold air is trapped. When there is a lot of air, the cold air cannot be captured and maintained. It's best to use bottled water or similar when traveling. This will fill the empty space and keep the cold inside the refrigerator.
5. Before opening the refrigerator, you can reduce the number of times to open the refrigerator and let as little hot air in.
6. When the refrigerator is located at the rear of the car or trailer, it is recommended to avoid direct sunlight to reduce the risk of heat increase. Proper ventilation shall also be provided to ensure effective power consumption and performance. You must remember that when the vehicle is parked in the sun with an ambient temperature of
+ 30 ° C, the internal temperature of the vehicle can reach + 55 ° C.




Safety instructions
Please read the instructions and safety instructions carefully before using the product
1. If the safety instructions are ignored, the manufacturer has the right not to be responsible for the damage of the products.
2. Using accessories not recommended by the manufacturer may cause injury and invalidate any warranty you may have.
3. The equipment shall not be exposed in the rain. Place the refrigerator on a dry, protected surface away from bumps.
4. Do not use this equipment near the direct heat source. For example, a cooker, radiator, or exposure to direct sunlight.
5. Do not put unsealed ice or liquid in the refrigerator.
6. Don't put hot food in the refrigerator.
7. The power cord must be replaced by qualified technicians
8. Disconnect the power cord from the plug before performing any maintenance on the refrigerator.
9. The equipment is also suitable for camping
10. Ensure that the refrigerator is always well ventilated, and nothing can cover or block the ventilation holes.
11. Except the equipment recommended by the manufacturer, do not use mechanical equipment or other equipment to accelerate the defrosting process.
12. Do not use electrical appliances in the food storage room of the refrigerator unless they are the type recommended by the manufacturer.
13. Do not store explosive substances or flammable products in the refrigerator.
14. Do not touch the compressor or condenser. They are very hot.
15. When placing the appliance, make sure that the power cord is not pinched or damaged.
16. Do not install multiple portable sockets or portable power supply at the back of the device.



Our Company


NINGBO WIN FULL AUTO PARTS CO., LTD. We are a professional manufacturer of automotive parts. A professional manufacturer integrating design, development and manufacturer. We specialize in a range of  fashion accessories. Diversified, reasonable prices and on time delivery.



FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.



NEXT RFQ

Q1.Do you make customer's auto AC parts?
A. Yes,you can send us samples and we can develop the new models especially for you.

Q2.What is your Minimum Order Quality?
A. Different products have different MOQ,but we can sell you even one piece if we have stock the model of you need.

Q3.What about delivery time?
A. If we have stock of the item you need, we can send goods to you within 2 working days after deposit or 100% payment into our bank account. If we don't have stock,the time to make each product is different generally, it takes 1 to 30working days.

Q4.What's your agency distributor policy focused on auto AC parts?
A. We have some different policies according to target markets, So please send emails for detailed discussions or talk face to face.