Main Features:
1. Available for any car, easy to install, plug and play
2. Screen 3.5 inch HD display
3. Multi-color design makes the screen more abundant and easier to read
4. Nano-technology to eliminate double reflections,more clear.
5. Rich Contents: speed,compass, speed alarm,free switch between km and miles
6. Auto power on/off: HUD start and off with vehicle started and shutdown, effective protection of the car battery;retaining the manual switch mode,more easy to control HUD.
7. Automatic and manual brightness adjustment mode,driving without glare.
| Item | HUD Display |
| Material type | Plastic |
| Environment temperature | - 40 degree--+80 degree |
| Relative humidity | 10%-95% |
| Alarm of sound level | >=30dB(A) |
| Barometric press | 86-106KPa |
| Environment voice | <=60dB |
| Voltage | 12V |
| Size | 8.8*5.3*1.3(cm) |
Packing information:
Size:88*53*13 mm
Weight: 40 g
Gift Box size:165 * 130 * 45 mm
Gross weight:205 g
Number of boxes:50 PCS / C NT
Carton size:68*35*24 cm
A box of net weight:10.25 kg
A box G W:10.86 kg
1* master, 1* car charger cable, 1* non-slip mats, 1* reflective foil, 1* Instructions
Product picture show:
When the dial on the left
1.Vertical long Press 5 seconds: enter into setting menu(menu 1-6), after finish adjustment, vertical long press 5 seconds to save and exit.
2.Short pull up:Increasing parameter values after enter into the menu setting.
3.Short pull down: Decreasing parameter values after enter into menu setting.
4. Vertical Short press: Increasing menu values after enter into menu setting.
5. Long pull down: turn on or off the alarm sound.
Reset setting:
Vertically long press 5 seconds to enter into menu setting, short press for several times to menu 6, short pull down to parameter 1, after adjustment,long press in 5 seconds to save and exit.
Turn on and off the buzzer:
Long pull down the wave button 5 seconds to turn off the buzzer,another 5 seconds to turn on the buzzer.
HUD settings:
Since HUD displays datas receive the satellites from GPS, GPS datas will be a little different with car dashboard datas.At that time,you can enter into menu setting to have a fine adjustment of HUD in order to get the same datas as dashboard.If you find there is something different with the the dashboard values,please make an adjustment as below:
Enter into menu setting:
Vertically long press in the wave button for 5 seconds to enter into the menu setting,short press in the wave button to increase the menu value,up or down the wave button to increase/decrease parameter value.After adjustment,vertical long press 5 seconds to save and exit.
Please Note: HUD projects dashboard information on the car front windscreen , because the windscreen is double, which will make double reflection on the windscreen when it works.The double reflection will be different cause of the different windscreen.If you can see clear of the displaying information, then there is no need to use the reflection film. If there is a double image, then please use the reflection film.
First, please put the non-slip mat on the dashboard, and then put HUD on it.Reflection film can be stick to the position right above the HUD position which can reflect host screen to windscreen.
1.Spray some water on the place that the film will be pasted on,and then use a dry cloth to clean it;
2.Take off the back side(marked 1) of reflection film,then paste it to the window glass.
3.After you have adjusted the location, you can use a scratch board or something else flat to slick the film and squeeze the water inside out until there is no bubble or water in it.
4.Take off the protection film (marked 2) of the reflection film. If the film cannot display the whole information, please adjust the non-slip mat to move the position
1. Full functions Testing Before Shipment.
2. Two Years Warranty
3. Good Protectively Package
4. Replacement for Spare Parts if there is any faulty
5. Timely Parcel Tracking
6. Better offer on Bulk qty and reorders
