Model NO.
JT700
Tracker:
Container/Trailer Tracker
Waterproof:
IP67
Battery Life:
3 Years
Antennas:
Built-in
Real Time Alert:
Door Open, Low Power, Tamper
JT700 is new launched device for container/trailer tracking, waterproof, robust, long-lasting battery, easy to install
Features
1). GPS/LBS location:
To ensure real time tracking without GPS signal
2). Real time alert:
Door open/close alert, anti-tamper alert, geofence alert, low battery alert
3). Smart power management:
Rechargeable 12,000mAh, un-rechargeable 20,000mAh, real time battery level display
4). Built-in RTC/motion sensor:
Data upload in real time or at given time
5). Waterproof IP67:
Robust standard for harsh environments
Function:
1. Working mode:
Standby mode: main working mode can divide into standby wakeup running stage, standby-sleep stage
Tracking mode: continue uploading real time tracking data, the max time interval is 24hrs and the min is 5s
2. Mode change:
Can change working model between this 2 models by command
3. Configure in wakeup status:
Configure in wake up status
When powered, it will have 10mins for configuration in default
Once detect any configuration steps or command, it will keep working at least 2mins from the last configuration time point
4. Location data uploading:
Tracking mode and main working configuration process, anti dismount alert, trigger stage follow up the settled uploading time interval
Standby stage don't upload location data
RTC wake-up upload only one location data
RTC wakeup (make sure wake-up and uploading data successfully)
5. Support multi time point uploading:
Able to set maximum 4 time point in each time for RTC wake-up time
6. Data storage supplementary:
If RTC wake-up uploading data not successful, the data will be restored
Maximum stored data: 1000pcs
These storage data will be uploaded supplementary by next wake-up
Positioning (to ensure positioning)
7. Double locating:
5mins GPS locating time and 10mins LBS locating time to make sure location successfully
Double locating
8. Anti dismount alert:
Once device installed on the stand, working normally, once it dismount or creep down, alert will generate and keep working 10min
9. Area alert:
Enter/out of area alerts
Area is polygon (maximum 50 angle), 1pc
Once enter/out of area more than 15s, as valid alert
10. Door alert:
Triggered to alert once container open/close the door
11. Low power consumption:
Main working mode most working under standby mode
RTC standby runs under the lowest power consumption mode
12. Time difference synchronization:
Synchronization with local time by commands
13. Inquiry by parameters configuration:
Could set/inquiry device parameter by configuration software or web remote configuration
14. Factory setting via commands
Features
1). GPS/LBS location:
To ensure real time tracking without GPS signal
2). Real time alert:
Door open/close alert, anti-tamper alert, geofence alert, low battery alert
3). Smart power management:
Rechargeable 12,000mAh, un-rechargeable 20,000mAh, real time battery level display
4). Built-in RTC/motion sensor:
Data upload in real time or at given time
5). Waterproof IP67:
Robust standard for harsh environments
Function:
1. Working mode:
Standby mode: main working mode can divide into standby wakeup running stage, standby-sleep stage
Tracking mode: continue uploading real time tracking data, the max time interval is 24hrs and the min is 5s
2. Mode change:
Can change working model between this 2 models by command
3. Configure in wakeup status:
Configure in wake up status
When powered, it will have 10mins for configuration in default
Once detect any configuration steps or command, it will keep working at least 2mins from the last configuration time point
4. Location data uploading:
Tracking mode and main working configuration process, anti dismount alert, trigger stage follow up the settled uploading time interval
Standby stage don't upload location data
RTC wake-up upload only one location data
RTC wakeup (make sure wake-up and uploading data successfully)
5. Support multi time point uploading:
Able to set maximum 4 time point in each time for RTC wake-up time
6. Data storage supplementary:
If RTC wake-up uploading data not successful, the data will be restored
Maximum stored data: 1000pcs
These storage data will be uploaded supplementary by next wake-up
Positioning (to ensure positioning)
7. Double locating:
5mins GPS locating time and 10mins LBS locating time to make sure location successfully
Double locating
8. Anti dismount alert:
Once device installed on the stand, working normally, once it dismount or creep down, alert will generate and keep working 10min
9. Area alert:
Enter/out of area alerts
Area is polygon (maximum 50 angle), 1pc
Once enter/out of area more than 15s, as valid alert
10. Door alert:
Triggered to alert once container open/close the door
11. Low power consumption:
Main working mode most working under standby mode
RTC standby runs under the lowest power consumption mode
12. Time difference synchronization:
Synchronization with local time by commands
13. Inquiry by parameters configuration:
Could set/inquiry device parameter by configuration software or web remote configuration
14. Factory setting via commands
Send Message
