Vehicle GPS Tracker
Technical parameter
1).GSM:850/900/1800/1900 Quad band
2).GPRS: Class12, TCP/IP
3).Working Voltage:9-28DC
4).Working current:≈22mA (12vDC)
5).Working current:≈12mA (24vDC)
6).GPS locating time:Cold start≈38s(Open sky)
Warm start≈32s
Hot start≈2s(Open sky)
7).GPS Precision:5M
8).Working temperature:-20ºC~+70ºC
9).Working humidity:20%~80%RH
10).Measurement:87(L)×43(W)×14(H)mm
Device status indicators
3.1 Connect DC 9-28V power supply, switch it on(switch beside
sim card holder),the red LED will light continuously.
3.2 The yellow LED lights continuously when searching the GPS
signals. When GPS works, the LED will be flashing.
3.3 The intermediate blue LED (GSM signal state)
GSM signal normal, blue LED flashing. No GSM signal, the
blue LED light continuously.
4.Installation
4.1 Preparation for the installation
4.1.1 Open the packing box and check the device and accessories.
If the model is wrong or the accessories not complete, please
contact the dealer.
4.1.2 Choose SIM card. Please insert a SIM card to the device. Please
take dealer's advice as reference.
4.1.3 SIM card installation. Open the little cover in the back cover
of the device and uncover the SIM card holder. Then insert the
SIM card and cover SIM card holder (as follows).
3.1 Connect DC 9-28V power supply, switch it on(switch beside
sim card holder),the red LED will light continuously.
3.2 The yellow LED lights continuously when searching the GPS
signals. When GPS works, the LED will be flashing.
3.3 The intermediate blue LED (GSM signal state)
GSM signal normal, blue LED flashing. No GSM signal, the
blue LED light continuously.
4.Installation
4.1 Preparation for the installation
4.1.1 Open the packing box and check the device and accessories.
If the model is wrong or the accessories not complete, please
contact the dealer.
4.1.2 Choose SIM card. Please insert a SIM card to the device. Please
take dealer's advice as reference.
4.1.3 SIM card installation. Open the little cover in the back cover
of the device and uncover the SIM card holder. Then insert the
SIM card and cover SIM card holder (as follows).
4.1.4 Connect the device to DC 9-28V power,then switch it on.
4.1.5 Install the device in the hidden place of the car.
The SIM card must be with GPRS function and enough deposit. If
your SIM card need input PIN when power on, please cancel it.
4.2 Installation
The GPS tracker must be installed under professional
personnel.
Note:
1) Please install the device in the hidden place as
followings:
Under Front windshield;
In the front instrument panel;
Under back windshield;
2) Avoid being placed with signal radiators like reverse
sensor ;
3) The device has GSM antenna and GPS antenna inside.
Please ensure the receiving side of the device is face
up and without metal cover.
Note:The metal cover will lessen the receiving of GPS
signals.6. The device connecting requirements.
5. Device wiring requirements
5.1 The device power supply is DC 9-28V. The red line is
positive pole while the black line is negative pole.
5.2 The negative pole of power supply connects with ground
or the metals. Please do not connect with other ground lines.
5.3 When finishing the power supply wire connection, please
make the plug of power supply to the device.
Tecoo Electronics Co., Ltd
Shenzhen Office
Add: Room 1403, Mingjun Business Center, Huarong Road,
Dalang, Longhua District, Shenzhen, China, 518000.
Tel: +86 755 61679980
Fax: +86 755 83953464
Headquarters Add: No.37, Yanfan Road, Yangyi Town, Lucheng District,
Wenzhou, Zhejiang, China. 325008. Tel:+86 577 89776016 Fax:+86 577 89785668
Mob: +86 13736369935
Http://tecoocn.en.made-in-china.com
