 |  |  |  |  |
Featured with adjustable power, automatic roaming, remote kill/revive, BF-TM8500 is a cost-effective mobile radio that will enable you to keep your workers connected and accounted for. The 50W high transmitting power can further extend your radio talk range while digital/analog dual modes deliver a smooth transition by allowing you to go on using your existing analog radios if there are any.
Transmit Interrupt
This function enables a supervisor to interrupt a radio conversation in order to clear a channel for more important communications.
Radio Priority-based Interruption
This function enables a radio with a higher level to interrupt communications between radios with lower levels, giving higher priority to radios with higher levels. This means better dispatching efficiency.
Adjustable Power
Our flexible high power mobile radio comes with 3 adjustable power levels. The user can use 50W high power to further extend talk range or switch into lower power levels to extend radio standby time, according to his specific needs.
Remote Kill/Revive
Such functions greatly facilitate dispatching work and can be especially useful if you want to kill a lost radio.
Automatic Roaming
In an IP multi-site network, BF-TM8500 can automatically roam from site to site and stay connected, delivering seamless communications.
Secure Communications
Use digital encryption to code and decode all voice calls, and support both dynamic and static encryption for secure communications.
GPS (Optional)
When activated, the integrated GPS will enable BF-TM8500 to constantly send its location information to the command center for the commander to see in real-time. All your vehicles stay tractable and accounted for.
-Digital/ Analog Dual Modes
-Pseudo Trunk
-DMO True 2 Slots
-2 Tone/ 5 Tone
-Bluetooth (Optional)
| General | |
| Frequency Range | VHF:136-174 MHz UHF:400-480 MHz |
| Channel Capacity | 1024 |
| Zones | 64 |
| Channel Spacing | 12. 5KHz/25KHz |
| Operating Voltage | DC 13.8V (±20%) |
| Frequency Stability | ±0.5ppm |
| Antenna Impedance | 50Ω |
| Transmitter | |
| Power Output | H: 50W. /M: 25W /L: 15W. |
| 4FSK Modulation | 12. 5kHz data only: 7K60FXD 12. 5kHz data and voice: 7K60FXE |
| FM Modulation | 12.5 kHz: 8K50F3E; 25 kHz: 16KΦF3E; |
| Modulation Limitation | +/-2.5kHz @ 12. 5kHz; +/-5kHz @ 25kHz |
| FM Noise | -40dB |
| Spurious Emission | -36 dBm≤1GHz/-30 dBm≥1GHz |
| Adjacent Channel Power | ≤-60dB |
| Frequency Response | +1/-3 dB |
| Audio Distortion | 3% |
| Vocoder | AMBE3000 |
| Receiver | |
| Digital Sensitivity | 5% BER: 0.20 uV |
| Analog Sensitivity | 0. 20 uV (12 dB SINAD) |
| Intermodulation | 60dB |
| Adjacent Channel Selectivity | 60 dB |
| Spurious Suppression | 60 dB |
| FM Noise | -40dB |
| Frequency Response | +1/-3 dB |
| Rated Audio Power | 5W |
| Rated Audio Distortion | 3% (Typical) |
| Conduction Radiation | -57 dBm |
| GPS Precision | Horizontal Accuracy ≤ -10m (with good signal) |
| TIFF (first location) Cold Boot | < 1 minute (with good signal) |
| TIFF (first location) Hot Boot | < 10seconds ( with good signal) |
| Environmental | |
| Operating Temperature | -20ºC - +70ºC |
| Storage Temperature | -30ºC - +85ºC |
Communications for Efficiency and SafetyFounded in 1989, BelFone has been pioneering the development of professional digital trunking and broad & narrow band convergent communications technologies. We provide a full range of radio solutions from analog radios, PoC radios, entry-level DMR radios, repeaters, and accessories, to DMR Tier III trunked systems. Thousands of customers worldwide benefit from our products and services.
Why Choose Us
VR Showroom
Exhibition
After-sales Service
Provides a 24-month warranty service for system products delivered by BelFone
We provide support services such as configuration, programming, etc. online (email, live chat, remote, etc.) or on-site
BelFone provides industry-standard repair service for your products. For channel partners, BelFone encourages local services and will prepare training and documents for better services to customers.
After-sales Service
We seek agents, integrators or distributors of BelFone radios worldwide. If you are willing to cooperate with BelFone Communications, please feel free to contact us.
With an internationalized manufacturing base covering an area of 23,000m2, more than 600 employees and 5 professional R&D centers, BelFone will be the best qualified solution provider for your radio communication needs.
1. Q: Are you a manufacturer?
A: Founded in 1989, owning a 23,000 square meters manufacturing base, more than 200 R&D engineers and 300 manufacturing workers, we are among the top manufacturers and designers in China mainland for two-way radios and systems.
2. Q: What is MOQ (Minimum order quantity)
A: 2 pcs for sample test first is recommended. The price policy sets MOQ for bulk order based on cooperation relationship with us as a distributor, dealer or premium dealer, or OEM cooperation. Please contact us for details.
3. Q: Do you accept customized?
A: Rebranding is acceptable and OEM&ODM is welcomed.
4. Q: Could you offer free sample to test?
A: Sample will be charged firstly, but will be refunded to you when you put bulk order on us.
5. Q: What is your lead-time for order?
A: 1-2 days for sample, 3-30days for bulk order, depends on the quantity for new inquiries. We do forecast for long-term business relationship partners.
6. Q: When can I find tracking information of sample?
A: We will send you the tracking number of sample within 2 days after delivery.
7. Q: How do you ensure your quality?
A: The product is designed and produced with good material in the industry. The company is ISO 9000:2008 certified and we make 100% OQC before delivery. Both above reasons ensure low defective rate for our products. We set warranty policy for products and accessories. Please contact us immediately if some unpredictable defectives happen. Thanks
