Solar / Electric Car Charger
Buyer Attention:
In order to confirm if our charger is suitable for your battery pack,
please send the following info to us by email:
(1) battery type
(2) number of cells in series
(3) capacity of battery pack(AH)
(4) The maximum charge voltage
(5) AC input volt:
(6) with CAN or enable
(7) if with CAN,tell us the BMS brand ,Our charger can work with EMUS,Orion,and many o ther BMS made in China like Ligoo BMS. AC cable and DC cable: mathcing socket without AC/DC cable.
(8) need air cool or water cool.if you don't mention we will send as air cooled as default.
Model Sheet:
Charge Curve:
1.8KW Connector Definition
Basic Specification:
Charger
Input voltage range:AC90V~264V
Frequency:45Hz~65Hz
Power factor:≥0.99
Efficiency at full loading:≥93%
Mechanical impact and vibration grade:QC/T 895-2011
IP grade:IP67
Operation temperature:- 40ºC~85ºC
Storage temperature: - 40ºC~105ºC
Charging control:CAN
Protection:Output over-voltage, over-current, short-circuit, polarity reverse, input low-voltage, input over-voltage, over-temperature
DC/DC
Nominal power:1KW
Peak power:1.2KW continuous with 6mins
Input voltage and current:14V±1%,72A
Efficiency at full loading:≥92%
Voltage regulatory:1%
Voltage stabilized accuracy:≤1%
Current stabilized accuracy:≤2%
Operation temperature:- 40ºC~60ºC
Storage temperature: - 40ºC~105ºC
Control way:CAN or Enable
Protection:Output over-voltage, output low-voltage, short-circuit, input polarity reverse, over-temperature, communication error
Size: 260(length) x 244(width) x 95(height)
Cooling way:Enforce Air Cooling,liquid-cooling
