Model NO.
fuel tank truck
Transport Package
RO-RO Sihpping / Bulk Cargo Shipping / Container S
Specification
steel
Trademark
sinotruk
Origin
China
Capacity:
50ml
Shape:
Spherical
Mounting Type:
Horizontal
Position:
On the Ground
Material:
Metal
Wheel Base (mm):
4300+1350
SINOTRUK HOWO 6X4 Fuel truck-20,000L | ||
Cabin | Driving type 6x4 LHD | |
HW76 cab, with one bed and air condition, 70°hydraulically tillable to the front | ||
Vehicle Main Dimensions | Overall dimensions (L x W x H)mm | 9500×2500×3210 |
Wheel base (mm) | 4300+1350 | |
Wheel track (front/rear) (mm) | 2020/1800 | |
Weight in KGS | Tare Weight | 13500 |
payload | 25000 | |
Front axles loading capacity | 1x7000 | |
Rear axles loading capacity | 2x16000 | |
Max. driving speed(km/h) | 90 | |
Engine | Brand | SINOTRUK |
Model | WD615.69 | |
Type | 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charged and inter-cooled | |
Horse Power(HP) | 336 HP | |
Emission standard | Euro | |
Gearbox | HW15710, 10-speed forward and 2 reverse gear | |
Clutch | Reinforced diaphragm clutch, diameter 430mm | |
Steering | ZF8098,power steering, hydraulic steering with power assistance | |
Oil tank | 400 liters | |
Tire | 12R22.5 tubeless tyre 11 pcs including one spare tire | |
Tank Size | 20,000 liters | |
Tank Material | Q235. End plate thickness:5mm, tanker body thickness:5mm | |
Note! Oil tank trucks that have not been used for a long time must be maintained
If your tank truck is not used for a long time, you must do the maintenance work of the vehicle in advance. Why? Long-term parking of tank trucks will cause oxidative deterioration of engine oil, antifreeze, brake fluid, etc., and may also cause other unexpected hazards. What should we do? Let's take a look together. 1. The first thing to do is to clean the vehicle. Once the tanker is cleaned in place, it is not easy to rust. All circuits on the vehicle must be closed. The tire pressure must be adjusted to the upper limit, and every one or two weeks. The vehicle should be moved a few centimeters to prevent the tire from being pressed on the ground due to a fixed position, causing the steel wire in that part to deform. 2. The antifreeze of the tanker should be emptied completely, the oil should also be drained, the battery should be turned off after sufficient power, and it should be charged regularly during the stoppage. 3. If the tanker truck is parked in the garage, ensure normal ventilation, keep the air humidity below 70%, apply lubricating oil or wrap it up with greased paper on the rusty parts of the vehicle, and seal the parts with gaps. , To prevent moisture, air and dust from entering the interior. 4. If the tanker is parked for a long time, the octane number of the fuel in the tank will decrease with the loss of light components and the increase in the content of gum, thereby reducing its anti-knock resistance. Therefore, the tank must be tightly sealed. And to avoid high temperature, the fuel storage time should not be too long. 5. If the conditions permit, and the tanker will not be used for a long time, it is best to find someone to start it every one or two months to check the engine's running condition. If there is any abnormality, it should be repaired and adjusted in time. 6. The carpets in the tanker truck should be aired from time to time. This is because the carpets in the tanker can easily absorb moisture, especially in humid areas and rainy seasons. The carpets on the floor should be checked frequently and aired in time to keep them dry. 7. The storage battery of the tanker truck should be checked frequently. The electrolyte level must be 10-15mm higher than the electrode plate. If it is insufficient, add distilled water in time and keep sufficient power. It is necessary to charge the battery.
The trucks we have exported before.
The trucks we have exported before.
1) Divided into different oil products, chemicals, food, as liquid food truck, chemical liquid truck, insulation liquid vehicles, dangerous goods transport vehicles, the asphalt transportation vehicle.
2) External sandblasting processing of tank, internal anti-corrosion treatment, Outside surface adopts advanced polyurethane paint, beautiful appearance.
3) Our company produces the Oil tank truck with advanced butt welding technology, after the forming of the tank high pressure gas leak detection, the tank has a high intensity, stable center of gravity, safe and stable vehicle characteristics.
4) Shot blasting pre treatment process after welding tank, rust, paint adopts the advanced baking technology, durable and beautiful appearance. Independent sub positions.
5) with all kinds of truck model, which can fulfill your requirement.
6) the key parts adopt the world's top technology products.
7) based on strong technical support and top level technology make the trucks with high quality and more reliable.
8) competitive price, cost-effective.
9) quick and efficient spare parts supply bring you more convenient.
10) fast delivery time, we can arrange production according to your needs exactly and quickly.
11) professional import and export dealing procedure, make customs clearance more high efficiency.
Send Message
