Model NO.
SMC-200-600/35
Specification
SMC-1500L/H
Trademark
SMC
Origin
China
HS Code
8413810090
Production Capacity
20set Per Year
After-sales Service:
24 Hours on Line Service
Warranty:
1year
Application:
Wharf, Port, Bus Station
Component:
Gas Station
Delivery Times:
90days
Transport Package:
40feet Container
Natural Gas Fueling Station Machine LNG Pump
cryogenic liquid oxygen nitrogen argon co2 lng pump workshop
LNG LCNG Refueling Station: 25Mpa LNG Transer Pump Skid
One. Introduction
1.1The medium used in this process system:Liquefied Natural Gas(LNG)
Design Temperature:-196ºC
Working Pressure: before submersible pump ≤1.6MPa, after pump≤2.0MPa; L-CNG high pressure pump before≤1.6MPa, after pump≤25MPa;
1.2 Physical Parameters of LNG:
Average Molecular Weight:17.3
Main Components:methane(CH4)~ 93.6 %,Ethane(C2H6)~4.12 %
Vaporization Temperature: -162.3ºC(atmospheric pressure)
Liquid Density:~426 kg/m3
Gas Density:0.772 kg/Nm3 (15.5 ºC)
Gas/Liquid Volume Ratio:~625:1(15.5 ºC)
Ignition Point:650 ºC
Remarks:As the LNG varies from place to place, the physical property parameters must be based on the LNG supplier's.
Two.LNG/L-CNG Filling Station Process Flowchart
Three.The General Process Flow Chart is as follows:
LNG/L-CNG Refuel Gas Station Equipment: L-CNG High Pressure Vaporizer Skid
LNG/L-CNG Refuel Gas Station Equipment: LNG Submerged Pump Skid 
LNG/L-CNG Refuel Gas Station Control System
LNG Dispenser Technical Specification
LNG LCNG Refueling Station Equipment: LNG Dispenser
LNG/L-CNG Refuel Gas Station Testing:
Welcome all the foreign customers come to visit our factory and LNG/L-CNG Gas Refueling Station Working Site.Thanks.
cryogenic liquid oxygen nitrogen argon co2 lng pump workshopLNG LCNG Refueling Station: 25Mpa LNG Transer Pump SkidOne. Introduction
1.1The medium used in this process system:Liquefied Natural Gas(LNG)
Design Temperature:-196ºC
Working Pressure: before submersible pump ≤1.6MPa, after pump≤2.0MPa; L-CNG high pressure pump before≤1.6MPa, after pump≤25MPa;
1.2 Physical Parameters of LNG:
Average Molecular Weight:17.3
Main Components:methane(CH4)~ 93.6 %,Ethane(C2H6)~4.12 %
Vaporization Temperature: -162.3ºC(atmospheric pressure)
Liquid Density:~426 kg/m3
Gas Density:0.772 kg/Nm3 (15.5 ºC)
Gas/Liquid Volume Ratio:~625:1(15.5 ºC)
Ignition Point:650 ºC
Remarks:As the LNG varies from place to place, the physical property parameters must be based on the LNG supplier's.
Two.LNG/L-CNG Filling Station Process Flowchart
- Unloading Process: Transfer LNG(liquid natural gas) from the tank truck to the LNG storage tank of the gas station through the LNG submersible pump skid(including the unloading truck and the tank booster) at the gas filling station.
- Pressurization Process: After unloading, the LNG is pressurized to above 23Mpa by the LNG high pressure pump skid, and then gasified into CNG(high pressure natural gas)by the high pressure vaporizer skid(including high pressure vaporizer, high pressure water bath electric heating reheater, and sequence control panel), and enter the high pressure gas cylinder group for storage.
- Gas Filling Process: When the pressure in the high pressure gas cylinder group is too low to be able to refill normally, the high pressure pump restarts and vaporizes to replenish and pressurize the high pressure gas cylinder group, and refill the car.
- Liquid Filling Process: LNG is pressurized to about 1.6Mpa by the LNG submersible pump skid, and LNG is filled into the car bottle group through the pipeline and LNG dispenser.
Three.The General Process Flow Chart is as follows:
LNG/L-CNG Refuel Gas Station Equipment: L-CNG High Pressure Vaporizer Skid LNG/L-CNG Refuel Gas Station Equipment: LNG Submerged Pump Skid LNG/L-CNG Refuel Gas Station Control SystemLNG Dispenser Technical Specification
| Item | Specification |
| Flow Range | 3-80kg/min |
| Max Working Pressure | 1.6MPa |
| Working Temperature | -30-+55ºC |
| Inlet Flow Meter Type | 1" low temp mass flow meter E+H/Emerson |
| Measurement Accuracy | ±1% |
| Minimum Reading Graduation Value | 0.01kg or Nm3,L |
| Single Measurement Range | 0-9999.99kg(or Nm3,L) |
| Cumulative Measurement Range | 0-99999999.99kg(or Nm3,L) |
| Filling Hose | 1" stainless steel soft pipe 4m |
| Return Air Hose | 1/2" stainless steel soft pipe 4m |
| Networking Interface | RS485(use photoelectric isolation 8KV ESD) |
| Electrostatic Discharge Immunity | 4class 8KV |
| Electrical Fast Transient Pulse Group Immunity | 4 class 4KV |
| Surge Immunity | 4 class 4KV |
| Power Supply | AC220V<200W |
| Explosion-proof Grade | ExdibellBT 4Gb |
| Weight | About 325kg |
LNG LCNG Refueling Station Equipment: LNG DispenserLNG/L-CNG Refuel Gas Station Testing:
Welcome all the foreign customers come to visit our factory and LNG/L-CNG Gas Refueling Station Working Site.Thanks.
Send Message
