Model NO.
MC750K20
Type
Charging Module
Certification
CE
Warranty
12 Months
Trademark
TGOOD
Transport Package
Standard Wooden Box
Specification
83 mm x 219 mm x 438 mm
Origin
China
MC750K20 is a DC charging module which is specially developed for electric vehicles using the latest optimized hardware design, advanced control algorithms, and advanced manufacturing technology, and MC750K20 meets the charging requirements of almost all vehicle models. The module has the advantages of ultra-wide constant power range, excellent low-voltage constant-current capability, high weighted efficiency in the full power range, large ultimate temperature range, and minimal standby power consumption. The charging system running is more safe, economical, and reliable, and the environment suitability is high.
Features
- The product has ultra-low standby loss, and the standby power consumption can be reduced to 6 W.
- The product has ultra-wide constant power range and excellent low voltage constant current capability, and the output current can reach 43 A.
- The product has the high-reliability protection performance and is resistant to severe environment conditions, such as high and low temperature, humidity, and salt spray, reducing operating costs.
- This product can work in the temperature ranging from -40 °C to +75 °C (ultra-wide temperature range) and the temperature ranging from -40 °C to +55 °C with full loads. The applicable temperature of the product is 5 °C higher than that of products in the industry.
- The four-dimension intelligent wind speed control technology effectively reduces losses and noise and ensures the product reliability.
- The product uses the pulse train intelligent high-speed discharge technology, which can automatically discharge the circuit and improves the port security.
- The power efficiency reaches 96.5%, which greatly reduces machine consumption and is energy-saving, environmental, reliable, and durable.
- The product has an ultra-wide output voltage range (150 to 750 Vdc), meeting charging requirements of 99% electric vehicles.
- The product uses the advanced active power factor correction technology to reduce harmonic interference on the power grid, and the standard adopted by the technology is superior to the industrial application standard.
- The product uses dual-DSP control system, realizes the fully-digital control of the charging module, and ensures the high control reliability.
- The product supports hot-swapping and is easy to install and use.
- This product has multiple safety protection functions, such as, input over-voltage/under-voltage, output short circuit, over-temperature protection, and air duct abnormality detection function.
This product applies to DC charging stations for electric passenger vehicles, electric shuttle buses, electric minibuses, and electric buses.
Technical Parameters
| Module | MC750K20 |
| Voltage Level | 750 V |
| Input | |
| Input Voltage Range | 260 to 530 Vac |
| Input Current Range | 0 to 40 A |
| Input Power | 45 to 65 Hz |
| Power Factor | ≥ 0.99 |
| THD | <= 3% |
| Output | |
| Output Voltage Range | 150 to 750Vdc |
| Output Current Range | 0 to 43 A |
| Rated Output Power | 20 KW |
| Stabilized Voltage Precision | ≤ ±1V |
| Stabilized Current Precision | ≤ 0.1 A |
| Current Unbalance | < ±3% |
| Ripple Voltage | < 1 V |
| Basic Features | |
| Efficiency | ≥ 96.5% |
| Standby Power Consumption | < 6 W |
| MTBF | > 120000 hours |
| Working Temperature | -40ºC to +55ºC (full-load) +55ºC to +75ºC (Used in the derated status) |
| Relative Humidity | ≤ 95% RH (No condensation problem) |
| Altitude | 2000 m |
| Communication Mode | CAN |
| Exterior Size (H x W x D) | 83 mm x 219 mm x 438 mm |
