Truck
2.55h
>100HP
ISO9001
Front Axle
Drive Axle
Black
Axle
RN
Iron Frame
2646*540*400
China
8708507190
Product Description
Product Information:
>>Implementing ltalian Fiat wheel tractor advanced technology;
>>Using offset type transmission shaft and swing type center swing pin;
>>Internal structure:middle reducer,differential and final planet reducer;good rigidity with whole front axle case;
External structure connected by a three-stage structure, flexible optional of spokes;
>>Roller bearing used on the end and knuckle bearing used for main pin for light and efficient steering;
>>Independent oil road,hydraulic pressure steering,steering angle to 50°;Single cylinder or double cylinder;
>>Adopting machining center and special machine for machining,planetary reduction gear for gear grinding,all the sealing parts are imported ones,not damaged assembly;
>>>>Applicable for corn harvester
Technical Parameter:
>>Implementing ltalian Fiat wheel tractor advanced technology;
>>Using offset type transmission shaft and swing type center swing pin;
>>Internal structure:middle reducer,differential and final planet reducer;good rigidity with whole front axle case;
External structure connected by a three-stage structure, flexible optional of spokes;
>>Roller bearing used on the end and knuckle bearing used for main pin for light and efficient steering;
>>Independent oil road,hydraulic pressure steering,steering angle to 50°;Single cylinder or double cylinder;
>>Adopting machining center and special machine for machining,planetary reduction gear for gear grinding,all the sealing parts are imported ones,not damaged assembly;
>>>>Applicable for corn harvester
Technical Parameter:
| Performance parameter | RN2.55 Harvest driving axle | |
| Driving ratio | 17.727 | |
| Outline dimension | 2646*540*400 | |
| Driving shaft front axle | ||
| Input shaft parameter | m=5.5 z=11 α=22° 30' with input flange disc | |
| Connection bolt between hub and spoke | 8*M16*1.5 | |
| Distance between spokes (mm) | 2550 | |
| The pressure of the hydraulic oil | 10±0.5 | |
| load bearing (kN) | 42 | |
| Net weight (KG) without oil | 430 | |
| Oil Volume | Middle (L) | |
| Round edge (L) | ||
| Front Axle Position | Extroversion angle of front wheel | 1° |
| Introversion angle | 7°30' | |
| Retroverted angle | 10° | |
| Fore tie (mm) | 0~(-3) | |
| Steering method | fluid-link steering | |
| Swing angle of the front axle | 11° | |
| Maximum steering angle of front wheel | 50° | |
| Steering Cylinder | Steering hydraulic cylinder type | Right rear\The left and right rear type |
| Diameter of steering hydraulic cylinder(mm) | 55 | |
| Steering hydraulic cylinder quantity | 1 | |
| Steering hydraulic cylinder travel(mm) | 232 | |
