Suzuki Motorcycle Part OEM Stainless Steel Brake Line
SUZUKI 2007-2010 SV 650 (SA) ABS GALFER FRONT / REAR SS BRAKE LINE KIT - 5 LINES
We supply an exclusive range of hoses that are manufactured to FMVSS-106, ADR, LTSA and DOT and TUV approved standards.
The hoses are a quality product, using 100% Stainless Steel fittings or 100% Steel with Zinc Coating end fititng , unlike some inferior items available.
Benefits include:
- Improved Brake Pedal Feel
- Sharper Braking Experience
- Improved Appearance
- Ideal for High temperature track day applications.
Comes as a car set with correct fittings, washers and fasteners.
Brake Hose Kits are available in a range of colours to suit the customer. However we only carry stainless steel finish in stock, so if you have specific colour requirements please contact us.
| Inner layer | PTFE Teflon Stainless steel braided brake hose Line Assembly |
| Enhancement layer | stainless steel wire braid ( AISI Steel 304 316 ) |
| Outer layer | PVC, PU(black, red, blue, yellow, purple, clear, gray, orange, ect.) |
| Temperature range | −65ºC ~ +260ºC |
| Product performance | high temperature resistance,low temperature resistance,long lasting and good durabilityacid and alkali resistance,ozone resistance, low coefficient,anti friction, long using life and non-aging |
| Purpose | widely used in Automotive, Bicycle, Motorcycle, Racing, Brake Lines, Clutch Lines,Fuel Systems, Turbo oil feed Hose, Coolant Systems, Oil Pressure Systems Gauge lines & Power Steering |
| Compatibility | Brake Fluids, Unleaded Petrol, Methanol, Water, & Oil. Ideal for use with Unleaded fuel, ect. |
| QDGY Part NO. | Inner Diameter | Outer Diameter | Outer layer | Stainless steel braid | Inner layer |
| GSG020 | 1/8"(3.2mm) | 0.275"(7.5mm) | PVVC | 304 stainless steel | PTFE |
| GSG026 | 3/16"(4.8mm) | 0.0.374(9.5mm) | |||
| GSG028 | 1/8"(3.2mm) | 0.255"(6.5mm) | no covering | ||
| GSG024 | 3/16"(4.8mm) | 0.3"(7.6mm) |
Stainless stee
l braided PTFE brake hose Features
Stainless steel braided PTFE Teflon brake hose Features:
304 stainless steel braid reinforced hose
Meets FMVSS-106 and SAE J1401 specifications
Every brake hose pressure tested to 3000 psi( 207 bar or 20.7Mpa )
Burst pressure:minimum 7250 psi ( 500 bar or 50Mpa )
Temperature range -73°C to 232°C
Compatible with DOT3,DOT4 and DOT4+ brake fluides
Avaliable PVC /TPU color covering :
Application:
For use in braking system of the vehicle.
1.These Hoses are teflon lined and are compatible with all brake fluids and feature a braided stainless outer covering to resist abrasion and corrosion. These lines are designed to withstand high pressure and are very flexible and can be used in the tightest of situations. These hoses can be used for many other applications such as gauge, turbo and vacuum lines
2.Production under ISO 9001:2008 and CE control. High quality product and customer's
3.satisfaction is our pursuit. Good faith cooperation. Bright future.
4.A reinforcement 304/316 stainless steel wire cover adds strength and durability to withstand high working pressures and harsh environments.Burst pressure reaches to 12,000 psi
Stainless Steel Braided PTFE Hose AN3,AN4,AN6,AN8,AN10,AN12,AN16
Hydraulic Stainless steel braided PTFE/Teflon Brake Hose Size List| Hydraulic Brake Hose Size List | |||||||
| SN. | Inch | Specification MM | I.D MM | O.D MM | Thickness MM | Wall Diff. MM | Burst Pressure Min.PSI. |
| AN3 | 1/8 | 3.2×6.5 | 3.30±0.20 | 6.50±0.30 | 1.60 | 0.25 | 12000 |
| AN3 | 1/8 | 3.2×7.5 | 3.30±0.20 | 7.50±0.30 | 2.00 | 0.25 | 12000 |
| AN3 Kevlar | 1/8 | 3.2×8.0 | 3.30±0.20 | 8.0±0.30 | 2.35 | 0.25 | 12000 |
| AN4 | 3/16 | 4.8×8.0 | 4.80±0.20 | 8.0±0.30 | 1.6 | 0.25 | 12000 |
| AN4 | 3/16 | 4.8×9 | 4.80±0.20 | 9±0.50 | 2.1 | 0.3 | 12000 |
| 1/4 | 6.3x15.0 | 6.3±0.20 | 15.0±0.30 | 7.35 | 0.3 | 12000 | |
| AN6 | 21/64 | 8.13x11.0 | 8.13±0.2 | 11.0±0.3 | 1.5 | 0.2 | 10000 |
AN8, AN10, AN11,AN12, AN16, AN20 hose details please find Rita he ,
all we have .
Our QDGY product SAE J1401 brake hose,Teflon brake hose,Steel tube,OE No. rubber brake hose assembly,Teflon brake line kits,bundy tube assembly and accessories exported to more than 56 contries and districts by sea ,by air or by express post as customer's prefer.
QDGY founded at 1998, the Co. has been expanded to the leading brake hose manufacturer in China now. It has more than 300 staff, buildings occupying area about 6,000 square meters . The sections include Marketing Department, Hose Factory and Fitting Factory.
Our QDGY brake hose, hose assembly and fittings are manufactured with variety of superior materials to meet varied requirements of Automobile and Motorcycle Industry especially in aftermarket even OEM market. Now our products 90% are being regularly exported to Europe, U.S.A., South East Asia, altogether over 56 countries and win a high reputation and honor for us.
Q1: Where to use the brake hose?
used in auto / car / motor / motorcycle / vehicle / truck / braking system.
Q2: Waht kinds of main rubber hose can product?
A: Rubber brake hose,EPDM brake hose,Hydraulic brake hose,Hydraulic hose,water hose,fuel& oil hose,Brake hose,Stem hose,SAE J1401 brake hose,DOT 1/8" brake hose,OE No. brake hose,Flexible brake hose,Performance competition brake hose...
Q3: What size of brake hose can you supply?
A: common size: 3.2x10.5mm(1/8");4.8x12.5mm(3/16")
Special size: 3.2x11mm...or your request size
Q4: Can you print the words(line) as our requirement?
A: Yes,we do provide embossed and printing marking with different color ,as your requirement.
Q5: What kinds of fitting can product?
A: All kinds.Female fitting,male fitting,banjo fitting,adepter brake hose fitting,bolts and nuts,steel with zinc ,chrome,nickle...stainless steel,brass...
Q6: How many types of brake hose do you product?
A: Brake hose,Teflon braided brake hose,PTFE stainless steel braided brake line,Steel tube,Bundy tube,Steel tube assembly,Brake hose assembly...
Q7: What is my order's delivery date?
A: It usually takes 5-40 days,which generally depends on your order quantity and our storage.Details information ,kindly please feel free to contact with us,or visit our website contact with us,we will reply you within 24 hours.
Q8: What is your payment?
30% down payment to begin the production, shipment after receive 70% balance.
Q9: Can you accept the third party inspection?
Yes, we accept
Q10: Can we place an order by Trade Assurance on Alibaba?
Yes, you can
