Chinese manufacturer 4cbm Water Tank 5cbm Waste suction Tank High Pressure Road Sweeper Truck
1) This vehicle integrates the functions of road sweeper, sprinkler and high-pressure cleaning vehicle, and can complete the functions of cleaning, high-pressure cleaning, road flushing and sewage collection in one operation.
2) The operation device layout mode of "central two vertical sweeps+central wide suction nozzle (built-in high-pressure water spray bar)+central high-pressure side spray bar" is adopted. It has various operation functions such as road cleaning, road surface cleaning, high-pressure cleaning, curb cleaning, garbage collection, sewage recovery, high-pressure spray and road separation wall cleaning.
3) The advanced intelligent control mode is adopted, and the start and stop of each operation mechanism are automatically controlled by the program after the operation mode is selected. The operation modes include full sweeping operation, left sweeping operation, right sweeping operation, full sweeping operation, left sweeping operation, right sweeping operation and pure suction operation.
| Truck model | CLW5110TXSD1 | ||
| Chassis model | EQ1110SJ8BDC | ||
| Wheelbase | 3800mm | ||
| Front/rear suspension | 1130/2070 mm | ||
| Engine model | Chassis engine | CY4102-E3C | |
| Spare engine | JE493-G3 | ||
| Engine rate | Chassis engine | 88kw, 3856cc, 120hp | |
| Spare engine | 57 kW | ||
| Max upgrade angle | 30% | ||
| Emission standard | Eu 3 | ||
| Accelerating outside noise | ≤84dB(A) | ||
| Max speed | 103 km/h | ||
| Approach angle | 21° | ||
| Departure angle | 13° | ||
| Weight specifications | Kurb weight | 7045 kg | |
| Whole weight | 11450kg | ||
| Dimension specifications | Whole dimension | 7000×2200×2750mm | |
| Minimum height above ground | 250 mm | ||
| High pressure clean | Clean speed | 3~20 Km/h | |
| Clean width | 3 m | ||
| Water pressure | 12 MPa | ||
| Water pump flow | 115 L/min | ||
| Clean and suction performance | Cleaning efficiency | ≥95% | |
| Maximum suction particle size | 110 mm | ||
| Clean and suction width | 3 m | ||
| Max clean capacity | 60000 m2/h | ||
| Disc brush size | ≥400 mm | ||
| Clean and suction speed | 3-20 km/h | ||
| Water Tank | Water tank volume | 5 m³ | |
| Dust tank | Dust tank volume | 5 m³ | |
| Dump bin tilting angle | ≥46° | ||
| Discharge door opening angle | ≥85° | ||
| Hydraulic system | Model | Open, electrical control | |
| Major parts | Gear pump, hydraulic motor, hydraulic cylinder, solenoid valve | ||
| System pressure | 16 MPa | ||
| Oil tank | 60 L | ||
| Oil temperature | 60 ˚C | ||
| Electrical system | Model | DC24 V | |
| Voltage | 24 V | ||
| Battery | 24 V | ||
| Water spray system | Major parts | Electric diaphragm pumps, water filters, nozzles, etc. | |
| Sweeping devise | Modle | Center two swabs, driven by a hydraulic motor, and the front right can be controlled independently, with a evasive reply function. | |
| Brush diameter | 850 mm | ||
| Brush angle | Tilt forward: 4-6 degrees Tilt: 4-7 degrees | ||
| Sucking plate | Model | Double suction, hydraulic control, spring suspension. | |
| Suction plate diameter | 180 mm | ||
| Suction plate width | 1800mm | ||
| High pressure water system | Model | post pump | |
| No:. | Germany PT36 | ||
| System pressure | 10 MPa | ||
| Speed | 1150 r/min | ||
| Water valve model | Hydraulic pressure ball valve. | ||
| Water valve pressure | 7 MPa | ||
| Spray nozzles model | High pressure washing type | ||
| Water filter | Mesh type | ||
Sinotruck Howo 18 tons high pressure road sweeper Dongfeng 12 cbm dust vacuum suction truck
ISUZ ELF 10 tons high pressure road sweeper truck ISUZ 600P 2cbm water tank 8cbm dust tank road sweeper
Dongfeng 4 cbm water tank 8 cbm dust tank road sweeper Sinotruck Howo 12 tons high pressure road sweeper
CLW Smart road sweeper 3 cbm dust vacuum suction truck CHANGAN 5 cbm high pressure street clean truck
FAQ
1.You are factory or trading Company?
Yes, we are oversea sales department of Chengli automobile . And you are always welcomed to visit our factory.
2.Could your company modify the standard product depends on my request?
Yes. Our company is specialized in researching and designing various of special purpose vehicle and spare parts. We can provide any product according to your demand.
3. Could your company totally customize products for me?
We can provide the customized-designing product meeting with any of your demand.
4. Could you provide certification that we need?
We can provide various certifications associate with trailer and truck. Such as DOT, ADR, SASO and so on.
5. How long could we receive our goods?
It depends on the product that you have ordered. If the goods are prepared, we will deliver your goods as soon as possible.
6. How about the after-sale service?
We can provide you the technical support to guide you repaire your product. And we will also send original spare parts free of charge by air. If you have special need, we can let our engineer to help you in person.
Contact
Hi, This is Echo Wong from Chengli Special Automobile Co.,Ltd.
We are manufacturer of all kinds of special trucks since the year 2004. I am also working in this field more than 5 years, feel free to contact me for the quick response by 24 hours telphone number.
