China OEM/ODM Creeper Truck, Tracked Vehicle, Crawler Dumper/Crawler Transporter/Tracked Carrier, All Terrain Rubber Crawler Manufacturing

creeper truck, tracked vehicle,Crawler Dumper/Crawler Transporter/Tracked Carrier 

Track car refers to the "car" with track running system instead of wheel running system. The vehicle has small unit pressure on the ground, small subsidence, strong adhesion ability and strong driving ability.
The track is a flexible chain ring driven by the driving wheel and surrounding the driving wheel, roadwheel, induction wheel and belt wheel. The track is composed of a track plate and a track pin. The track pin connects each track plate to form the track chain ring. There are holes at both ends of the track plate, meshing with the driving wheel, and induction teeth in the middle, which are used to regulate the track and prevent the tank from falling off when it turns or tilts, and strengthen the anti-slip tendons (referred to as patterns) on the side in contact with the ground to improve the robustness of the track plate and the adhesion between the track and the ground.
First, the main features
1. Wide range of use, simple structure, smooth transmission, labor-saving operation, easy to achieve automatic control.
2, suitable for marsh, beach, desert, paddy field, tropical rain forest, snow and ice and other complex road conditions.
3, power enough, low fuel consumption.
4. Large traction force, good climbing performance and strong transportation capacity.
5, the turning radius is small, flexible, especially to adapt to the narrow site, reduce the cost of building roads.
6, equipped with electric start, centralized handle, easy to operate.
7, equipped with hydraulic take-off and landing, self-unloading, reduce labor intensity, improve transportation efficiency.


Parameter:

Model	1.5 tons hand-held tracked carrier
Full vehicle size (mm)	2200 * 1100 * 1300
Starting mode	Electric starting
Gear position	Three advances and one retreat
Track specification	230 * 72 * 46
Engine type	192FA air-cooled engine
Engine power	11.7 P
Carriage size (mm)	1400 * 1100 * 500
Mode of discharge	Hydraulic self-discharge
Coating technology	Spraying process
Gearbox brand	Solid transmission
Bearing wheel material	Precision casting

Model	2 tons hand-held tracked carrier
Full vehicle size (mm)	2300 * 1100 * 1300
Starting mode	Electric starting
Gear position	three front,one reverse
Track specification	230 * 72 * 56
Engine type	Air-cooled engine
Engine power	12.5 P
Carriage size (mm)	1600 * 1200 * 500
Mode of discharge	Hydraulic self-discharge
Coating technology	Spraying process
Transmission model	Solid Force Type 18
Bearing wheel material	Precision casting

Model	2 ton seat crawler transporter
Vehicle size(mm)	2600 * 1300 * 1400
Starting mode	Electric starting
Maximum speed	15KM/h
Track specifications and models	230 * 72 * 56
Engine type	Single cylinder water cooled diesel engine
Site width	1000mm
Coating technology	Spraying process
Engine power	18P
Carriage size (mm)	1600 * 1200 * 500
Mode of discharge	Hydraulic self-discharge
Be self-possessed	1.3 T
Approved load	2T
Transmission model	Solid Force Type 18
Load-bearing configuration	Six 150 in one wheel
Customization type	Support customization

Model	3 ton seat crawler transporter
Vehicle size(mm)	3350 * 1600 * 1550
Starting mode	Electric starting
Maximum speed	20KM/h
Track specifications and models	350 * 90 * 56
Engine type	Single cylinder water cooled diesel engine
Site width	1550mm
Coating technology	Spraying process
Engine power	25P
Carriage size (mm)	2200 * 1600 * 500
Mode of discharge	Hydraulic self-discharge
Be self-possessed	1.7 T
Approved load	3T
Transmission model	Solid Force 21
Load-bearing	Seven 180 in one wheel
configuration	Two 150 tugs
shift	High speed, 6 forward, 2 back

Production and warehouse: