Electric Vehicle Charger/Ev Charger/Car Battery Charger/Portable Ev Charger 60KW/100KW/120KW/160KW
Short Description:
The integrated DC charging pile is suitable for city-specific charging stations (buses, taxis, official vehicles, sanitation vehicles, logistics vehicles, etc.), urban public charging stations (private cars, commuter cars, buses), urban residential communities, shopping plazas, and electric power Various parking lots such as business places; inter-city expressway charging stations and other occasions that require DC fast charging, especially suitable for rapid deployment under limited space
| Product number | CH-DC-090YAO/KY-DC-090 | CH-DC-120YAO/KY-DC-120 | |
| Detailed specifications | rated power | 90KW | 120KW |
| Charging equipment | Installation method | Vertical | |
| Wiring method | Bottom line in, bottom line out | ||
| Equipment size | 1600*750*550mm | ||
| Input voltage | AC380V±20% | ||
| Input frequency | 45-65Hz | ||
| The output voltage | 200-750VDC | ||
| Single gun output current range | Ordinary model 0-120A | Ordinary model 0-160A | |
| Constant power model 0-225A | Constant power model 0-250A | ||
| Cable length | 5m | ||
| Measurement accuracy | 1.0 level | ||
| Electrical indicators | Current limit protection value | ≥110% | |
| Stabilization accuracy | ≤±0.5% | ||
| Steady flow accuracy | ≤±1% | ||
| Ripple factor | ≤±0.5% | ||
| effectiveness | ≥94.5% | ||
| Power factor | ≥0.99 (above 50% load) | ||
| Harmonic content THD | ≤5% (above 50% load) | ||
| feature design | HMI | 7-inch bright color touch screen | |
| Charging mode | Automatic full charge / fixed power / fixed amount / fixed time | ||
| charging method | Charging by swiping/charging by scanning code/charging by password | ||
| payment method | Credit card payment/scan code payment/password charging | ||
| Networking method | Ethernet/4G | ||
| Safe design | Executive standard | IEC 61851-1:2017,ICE 62196-2:2016 | |
| security function | Charge gun temperature detection, over-voltage protection, under-voltage protection, overload protection, short circuit protection, grounding protection, over temperature protection, low temperature protection, insulation monitoring protection, polarity reverse protection, lightning protection, emergency stop protection, leakage protection | ||
| Environmental indicators | Operating temperature | -25ºC~+50ºC | |
| Working humidity | 5%~95% non-condensing frost | ||
| Working altitude | <2000m | ||
| Protection level | IP54 | ||
| cooling method | Air-cooled | ||
| Noise control | ≤60dB | ||
| MTBF | 100,000 hours | ||
Application Environment
The ambient air temperature during operation is -25ºC~50ºC,24h daily average temperature is 35ºC
The average relative humidity ≤90%(25ºC)
Pressure :80 kpa~110 kpa;
Installation vertical inclination≤5%;
Experimental level of Vibration and shock in use ≤ I Level,Inductive strength of an external magnetic field in either direction≤1.55mT;
Not rated for zoned areas;
Avoid direct sunlight; When outdoor installation, it is recommended to add sunshade facilities for charging stations to prolong the service life of the equipment;
