
Dongfeng Yufeng EM26 is just in the middle of the micro-surface and the facade, and the benefit is that it can hold a large number of goods than the micro-surface, and it will not easily lead to indoor space consumption like the mid-surface car series.We all know that at this stage, the popular micro-surface car box is basically around 4.5-5 cubic meters, and there are few cars beyond 5 cubic meters.And this kind of small car box has been slowly unable to meet the market demand, in other words, in the middle of the micro-surface and the facade, there is an urgent lack of a fine-differentiated car series.Dongfeng Yufeng EM26 is just in the middle of the micro-surface and the facade, and the benefit is that it can hold a large number of goods than the micro-surface, and it will not easily lead to indoor space consumption like the mid-surface car series.Dongfeng Yufeng EM26 side door opening degree is very wide, can accommodate relatively heavy goods in the side door loading and unloading cargo.At the same time, the open-type electric taildoor can be opened 180 degrees, and it is also convenient to load and unload objects.The wood floor is made of aluminum alloy profile material, which is resistant to wear and corrosion and can ensure light weight.Dongfeng Yufeng EM26 approved load is also very excellent, the total quality of the body in white is 3 tons, the total weight is 1.64 tons, and the approved load can reach 1.23 tons, which is far beyond the general micro-surface and can be comparable to the facade.It is necessary to understand that at this stage, the approved load capacity of pure electric microplane is mostly around 990kg, and there are few vehicles exceeding 1 ton.Reasonable and legal preconditions to pull down a large number of goods, to improve the driver's profit is of great benefit.
| Vehicle description | |
| Model | EM26(v1) |
| Dimensions (mm) Length \ Width \ Height | 4865*1715*2060 |
| Body structure | frameless body |
| Wheelbase mm | 3050 |
| Front/rear wheel track (mm) | 1470/1450 |
| Maximum design total GVW (kg) | 3000 |
| Curb weight (kg) | 1640 |
| Rated carrying passengers (persons) | 2 |
| Rated load weight (kg) | 1230 |
| Maximum speed (km/h) | 90 |
| Maximum gradeability (%) | ≥20 |
| Range (km) operating method | 220 |
| Inside dimension of cargo box (length × width × height) (mm) | 2670*1550*1350 |
| Trunk/cargo box Capacity (m³) | 5.59 |
| Electric motor type | permanent magnet synchronous motor TZ180XS105 |
| Electric motor manufacturer | INOVANCE SUZHOU |
| Motor rating/peak power (kW) | 30/70 |
| Motor rating/maximum torque (NM) | 90/230 |
| Motor rating/maximum speed (RPM) | 3183/9000 |
| Cooling mode | hydraulic |
| Protection grade | IP67 |
| model | KTZ33X28S001 |
| Controller Manufacturer | INOVANCE SUZHOU |
| Rated current (A) | 140 |
| Cooling method (air-cooled/liquid-cooled) | hydraulic |
| Protection grade | IP67 |
| Type of energy storage device (lithium iron phosphate/ternary) | LFP |
| Energy storage device assembly model | L125V01 |
| Energy storage device assembly production enterprises | CATL |
| Single model of energy storage device | CB220 |
| Energy storage unit production enterprises | CATL |
| Total storage capacity of energy storage device (kWh) | 41.86 |
| Energy Storage Device Assembly Nominal Voltage (V) | 334.88 |
| Energy Storage Plant Assembly Nominal Capacity (AH) | 125 |
| Battery Charging Time Fast/Slow Charging (h) | fast 2-2.5h,slow 14-16h |
| Battery heating system | Have |
| Rated power (3.3/6.6kW) | EU charging Port |
| Cooling method (air-cooled/liquid-cooled) | hydraulic |
| Qty of speeds | 3 |
| Shifting device | Handle type electronic shift gear |
| Rear axle ratio | 10.5 |
| Drive mode (front/middle/rear, front/middle/rear drive) | RR |
| Front suspension type | McPherson type independent suspension |
| Rear suspension type | Sheet spring non-independent suspension |
| Steering assistance (hydraulic/electric) | electric |
| Front and rear brake type (disc/drum) | Front disc/Rear drum |
| Parking Brake (Electronic/Handbrake) | Hand brake |
| Tire size | 195 R14C |
| Drive mode (front/middle/rear, front/middle/rear drive) | RR |
| Front suspension type | McPherson type independent suspension |
| Rear suspension type | Sheet spring non-independent suspension |
| Parking Brake (Electronic/Handbrake) | Hand brake |
| Tire size | 195 R14C |
| Rim material (steel/aluminum alloy) | Iron |
| Near and far light lamp source (halogen/xenon /LED) | LED |
Equipped with Suzhou Huichuan permanent magnet synchronous motor, Ningde Times lithium iron phosphate battery, battery capacity: 41.86kWh, high-power charging, short charging time, long life, fully meet the daily transportation needs.In terms of vehicle performance, Dongfeng Yufeng EM26 also has a good performance. Under full load condition, the cruising mileage of constant speed (official test) can reach 220Km, the maximum climbing grade is 20%, and the maximum speed is 90Km/h.
Large space is a highlight of Dongfeng Yufeng, a large number of logistics supplies transportation, the need for a space-applicable transport vehicle to meet the transport needs.The internal space of Dongfeng Yufeng vehicle can reach 6m3, and the loading capacity is ahead of the same type of products;The carriage utilization rate is extremely high, each transportation can load more goods, greatly improve the efficiency of postal logistics, reduce the frequency of transportation, save transportation costs!
Dongfeng Yufeng EM26 model standard load endurance of more than 220Km, battery capacity of 41.86kwh, theuse of 60KW super power synchronous motor, measured 100 km power consumption as low as 11.6kwh.
On the basis of the original 90" and 135" lock,the new tallgate adds a more practical 270" lock. when parking and loading and unloading,thetailgate can be directly flipped and fitted with the body to reduce the interference to the neighboring car. in addition, the double rolloverseat is added, and the space configuration is more flexible. Dongfeng Yufeng innovates with a front-drive chassis design, which has beenprofessionally adjusted by a top German company for more accurate control and better stability.
As an energy-saving and environmentally friendly high-efficiency electric vehicle, with Ningde times lithium ironphosphate battery high energy density of 136Wh/kg, battery capacity of 41.86Kwh. The use of 60KkW super powersynchronous motor, rated/peak power 30/60kw, rated/peak torque 90 220NM, measured 100km power consumption aslow as 11.6kwh, tons of 100km power consumption < 16KWh, the load condition can reach more than 220kM, thetransport radius of 50-75KM, three electric matching performance in the same level of the best.
Hubei Dongrun Automobile Co.,Ltd is a professional manufacturer with 30 years experiences in vehicle field. The main products are Side wall semi trailer, flatbed semi trailer, bulk cement tank semi trailer, concret mixer truck,Container transport skeleton semi trailer, car carrier,refrigerated truck, dumper truck etc.
We dedicate to provide high quality trucks and trailers by innovation technology and strict quality inspections. we aim to ruduce the customer's cost by professional and efficiency service. We provide customized solutions to meet different needs and requirements. As well as offering customer flexible terms of payment and on time delivery.
At now, we sold 15 series include 200 Models for more than 100 countries in Asia, Africa, Europe, South America, North America, Middle East etc. Hope to establish long-term relationships with you.




Pre-sales
1.Free Pre-Sales Consulting
2.Free videos and picture offering
3.Any kind of technical infomation are available .
4.Offer progressing solution to reduce cost.
After-sales
1.Full technical support by e-mail, video or call
2.Lifelong maintenance and spare parts supply
3.Free training installation and operation.
4.Quickly response in 12 hours to reduce losses

1.Professional Technology
We have our own R & D Team with more than 30 years experience in auto field .
2.Better Quality
We have advanced production equipment and have a strict quality inspection team. To ensure better quality before you get our vehicle product.
3.Reasonable Price
We offer more competitive prices while ensuring quality.
4.Thoughtful Service
We have 7*24 hours online service to answer cutstomer pre-sale and after-sale questions. Offer cutstomer longer warranty.
5.On Time Delivery
In the peak season we will ensure that your vehicle products on time delivery, in the off-season we can delivery your vehicle products in advance.
6.Strong Strength
Our company total investment is 1 billion RMB. Our factory occupies an area of 350,000 square meters. the annual sales of vehicle products are 2 billion RMB per year.
1 What information should I provide if I want to get a quotation?Please tell us the application of this truck/semi trailer.road condition, cargo type,loading requirement,dimensions requirement, quantity etc. The more information you provide, the more accurate model and price you will get.
2 What kind of payment do you acccept?
We mostly accept L/C and T/T.
3 Can I customize my own Truck or semi trailer?
YES! We support personal customization.such as suspension, ABS, tires, loading capacity, demension, function, etc. Different configeration, different price.
4 What is the delivery date?
It usually takes 20 to 35 days after receiving the deposit.





















