Radio Shuttle Racking is a semi-automated high-density storage solution for storage of
goods,which uses an automatic device to move in the channel back and forth for trans
portation,then let the forklift pick up at the end.
This system organizes pallets with high precision,fast and sustainable.And also lower the
risk of damage to racks and operators.
Drive-in Racking provides a maximum cube space utilization.The floor to ceiling storage optimizes
vertical space and significant depth of the racks which reduces the need from traditional aisles.
The greater density of storage in both these systems allow seven times more storage room
than floor stacking and three times more than the traditional pallet racks.
Gravity Flow Racking,also known as Pallet Flow Racks,fully utilize available storage space and
ensure the picking aisle has access to stocked pallets.In this first-in,first-out system,
pallets are loaded on the top end of the slightly inclined rack.Then,pallets glide safely and ef
fortlessly at a controlled rate to the front of the storage lane.
This system reduces warehouse cost via automatic gravity flow pallet rotation,and also re
duced forklift damage as pallet orcarton flows to the operator or unloading area.
Double Deep Pallet Racking is designed to increase storage capacity and maintains a high
degree of selectivity,by storing pallets two deep single-sided,and /or four deep on double-sid
ed racks.In this system,the pallets are stored at two depths,thus achieving higher storage den
sity.Meanwhile,access to the pallets simplely and quickly.Unlike adjustable pallet racking,the
operator can access more pallets in one route.
Very Narrow Aisle Pallet Racking (VNA)is an adaptation of standard adjustable pallet racking
system,but is compacted into a very small area,creating a high-density storage system that makes
it possible to increase the capacity of the warehouse without expanding the space.
VNA system need to use special forklifts with multi-steering.The width of aisle is 1700 to 2000mm
in regularly.
Mezzanine Floor,known as equipment platform,is a cost-effective solution to increase your
storage or production space by utilizing the existing unused vertical space in your facility.
Mezzanine can be installed in high-ceiling spaces to optimize vertical space.These
semi-permanent steel structures / platforms are more often and more affordable than build
ing renovations.
Cantilever Rack system offer a storage solution for long and heavy items that cannot be easily
stored in other traditional styles of pallet rack systems.
This type of rack system is constructed of a series of single upright accompanied with extended
arms and H-steel sturdy bases that create open shelves,allowing for unobstructed front load
storage of long,bulky or awkward shaped items.The arms are easily adjustable and available in
varying lengths,allowing you to store goods with different proportions.
Mold Racking is a kind of shelf,also named Drawer Rack.The top of the rack can use manual or
electric mobile hoist which is convenient to lift the mold.It is widely used in casting fundry,manu
facturing of various molds,the storage of precious metal sheets.
