Marine Hydrophore Stainless Steel Pressure Water Tank
This series hot water tank can be combined to use with fresh water pressure tank on board, that is to use fresh water in fresh water pressure tank to replenish this tank, and then heated by electric or steam heating elements for usage of entire vessel.
Operation:
1. Gas-filled
Start the compressor. Open the charge valve to change gas into tank until the needle of pressure gauge is
directed to 0.1MPa. Then close charge valve, stop charging.
2. Adjust the range of control pressure
Set the low pressure controller as 0.3Mpa, high pressure controller as 0.4MPa.
3.Adjust the take-off pressure of safety valve
Adjust the take off pressure of safety valve, when the pressure in tank is more than 0.42MPa, the safety valve will take off to release the pressure in tank.
4. Normal working
(1)Open the water inlet and outlet valve
(2)Turn the selective switch "main pump- spare pump" of control box to main water pump or spare water pump. Turn the change-over switch of water pump to "auto". When the pressure in tank is lower than 0.3Mpa, the water pump will start automatically until the pressure reaches 0.4Mpa.
| Model | 1 |
| Capacity(m3) | 1 |
| Working pressure (MPa) | 0.4(60ºC) |
| Design pressure(MPa) | 0.44 |
| Test pressure(MPa) | 0.66 |
| Safety valve open pressure(MPa) | 0.42 |
| Water inlet temperature(ºC) | 15 |
| Water outlet temperature (ºC) | 65 |
| Working temperature(ºC) | 0~65 |
| Design temperature(ºC) | 80 |
| Heated water capacity(kg/h) | 900 |
| Electrical heating power(kW) | 60 |
| The thickness of the external thermal layer(mm) | 40 |
| The thickness of outer galvanized sheet steel(mm) | 0.7 |
| Electricity | AC380,50Hz,3φ/AC440V,60Hz,3φ |
1. Our Shipyard: Ningbo Zhenhe shipyard, and now Taihang is the branch representative of our yard.
2. Our founding team has experience of more than 15 years in shipbuilding and ship repair with our engineer and designer.
3. Equipment quality guarantee: Based on shipyard feedback, we built up a manufacturer file to ensure the good quality of the products. Also, we can send our engineers to help our clients to install and test this exported equipment.
4. We are a second-hand ship broker to help you find the satisfied used different kinds of vessels.
5. We can provide the CKD kits and one-stop service based on our laser-cutting machine and purchase ability
6. We have a very professional design and technical team to work out the perfect plan for our clients and help to solve any matters with pre-sale and after-sale.
7. Customer Distribution: Tanzania, Rwanda, India(Mumbai and Kolkata), Suva, Portugal, Russia, Netherlands, Iceland, Denmark, Malaysia, Mexico.......
