| 2 oil fire engines (800L tank) - Legendary model | ||
| Technical parameters | Length * width * height (mm) | 4770 * 1610 * 2050 |
| Rated crew(people) | 2 | |
| Maximum travel speed km/h | ≤27km/h | |
| Driving range (km) | 60-80 (level road) | |
| Safe climb | 15% | |
| Minimum turning radius (m) | 7.3 m | |
| Minimum ground clearance (no load/full load)mm | 140/130 | |
| Wheelbase | 2300 mm | |
| Wheel gauge | Front 1350/ rear 1290mm | |
| Braking distance(no load/fullload)M | 3.1/5.0 | |
| Drive parts | Engine | 4A13 electric injection engine |
| Tank capacity (L) | 55 | |
| Displacement | 1.3 Emission standard Country 5 | |
| Gearbox | Five-speed shift | |
| Front and rear suspension | McPherson type independent suspension, leaf spring type non-independent suspension + cylinder type hydraulic shock absorbers | |
| Rear axle | The only automotive-grade fully floating rear axle with a rear axle speed ratio of 12.43 | |
| Transmission technology | Industry automotive drive shaft technology | |
| Body configuration | Front stop | Laminated glass |
| Seats | Leather fabric | |
| Rearview mirror | One manual external rearview mirror on each side | |
| Top canopy | Automotive professional environmental protection thermal insulation aluminum-plastic panel | |
| Flooring | Aluminum alloy patterned non-slip flooring | |
Steering system | Two-way rack and pinion steering system, automatic gap compensation function, electronic direction assist | |
DC, light and signal | 72V/12V-400W front lights, turn signals, rear taillights, horns, reverse buzzers, fire special alarm lights | |
| Bodywork | Automotive craft sheet metal body | |
| Tank capacity (L) | 800(stainless steel tank, internal release board) | |
| Rolling shutter door | Pull shutter doors | |
| Fire pump | Fuel oil fire pump | |
Frame | Shot blasting for rust removal, phosphating pickling, cathodic electrophoresis, spraying automotive top paint | |
Instrument desk | Instrument table for injection car, voltmeter, electric meter, indicator light,electric lock switch, combination switch, speed meter. | |
Braking System | Front disc rear hub four-wheel hydraulic brake + handbrake parking,hydraulic vacuum brake power | |
| Front axle and suspension | Independent suspension, coil spring + cylinder type hydraulic shock absorption | |
| Rear axle and suspension | Integral rear axle, cylinder type hydraulic shock absorption | |
| Tire diameter | 185R13 | |
| On-board fire fighting equipment | |
| Categories | Quantity |
| 800L stainless steel tank | 1 |
| Water cannon | 1 |
| Fog Cannon Machine | 1 |
| 4kg dry powder fire extinguisher | 2 |
| Fire hose (25m) | 2 rolls |
| Fire shovel | 1 handful |
| Fire axe | 1 |
| Fire hydrant wrench | 1 |
| Fire bucket | 1 |
| Dc switching water gun | A handful |
| Flowering water gun | 1 set |
| Type 92 fire suit | 1 set |
| Fire helmet | 1 |
| Fire belt | 1 |
| Fire stab-proof boots | 1 pair |
| Fire pump | 1 |
Wide range of application
quality guarantee
1.Our company guarantees that the supplied vehicles are brand new, unused original qualified products, and ensure that the provided vehicles have good performance during their service life under normal maintenance conditions of correct installation and normal use.
2.Our company is committed to the quality standards of the supplied vehicles in accordance with the relevant national quality and technical standards and relevant laws and regulations and provisions of the implementation of the requirements, and not lower than the original manufacturer's quality assurance regulations and relevant supply standards for the supply of counterfeit and shoddy products.
after-sales service
1.Promise to provide permanent maintenance services, vehicle warranty for one year, after the warranty period to provide paid services.
2.Regular return visit maintenance: Telephone return visit every 3 months, timely understanding of the buyer's opinions and suggestions, in order to promote the company's after-sales service work to further improve.
After-sales proces
1.The customer provides product information, unit information and contact information by telephone or email message, and describes the cause of the problem to the manufacturer.
2.After receiving the information, the manufacturer will try to deal with it as soon as possible.
3.Provide a solution to the problem described by the customer until the customer is satisfied.
Workshop pictures
Q1 Are you factory or trading company?
A:We are factory in Guizhou province,China,with more than 10 years of manufacturing experience
Q2 Do you support customized products?
A:We offer a wide range of customized products, which can be customized according to your requirements
Q3 How long is your production cycle?
A:Production cycle 30 days in peak season, 10-15 days in off-season
Q4 How about the trading term and payment term?
A:We can discuss this individually
