| 18-seater electric sightseeing car- small train | ||
| Electrical system | Electronic control | 96V AC controller |
| Battery | Maintenance-free battery 6V/piece, 16 pieces | |
| Motor | High efficiency copper winding AC 96V/11KW motor | |
| Charger | Computer intelligent charger, input voltage 220V/180V, output 96V, 30 A | |
| Charging time | Less than 12 hours (discharge rate 80%) | |
| Body configuration | front zip | Special double-glazed glass for automobiles |
| seat | Adopt adjustable car seats + leather seats; bus seats (optional) | |
| rearview mirror | One manual exterior rearview mirror on the left and right | |
| canopy | Aluminum alloy frame plus high-quality ABS molded plastic plate | |
| floor | Pattern aluminum floor | |
| steering system | Turbine worm steering system, electronic direction assist | |
| DC, lights and signals | 96V/12V-400W front light, turn signal, rear tail light, horn, reversing buzzer | |
| Body | Automotive craft sheet metal body | |
| dashboard | Voltmeter, electricity meter, instrument indicator light, electric lock switch, combination switch, speedometer. | |
| Braking System | Front disc, rear hub, four-wheel hydraulic brake + handbrake , vacuum brake assist | |
| front and rear suspension | MacPherson independent suspension, leaf spring non-independent suspension + cylinder hydraulic shock absorber | |
| rear axle | Integrated rear axle + cylinder shock absorber | |
| tire diameter | 185R14 | |
| Technical Parameters | Length*width*height ( mm ) | 6100 *1960 *2250 |
| Rated occupants | 18 people | |
| Maximum driving speed | ≤30km/h | |
| Driving mileage ( km ) | 80-100 (flat road) | |
| safe grade | 15% | |
| Minimum turning radius | 8.6 m | |
| Ground clearance in the middle of the frame | 280mm | |
| Wheelbase | 3640mm | |
| Wheelbase | Front 1590 / Rear 1590 ( mm ) | |
| Braking distance (initial speed 20Km/h; no load/full load) | 4.6/5.5 ( M ) | |
Production informations
Classic appearance with surging power, take you over the mountains, enjoy the most beautiful scenery!
quality guarantee
1.Our company guarantees that the supplied vehicles are brand new, unused original qualified products, and ensure that the provided vehicles have good performance during their service life under normal maintenance conditions of correct installation and normal use.
2.Our company is committed to the quality standards of the supplied vehicles in accordance with the relevant national quality and technical standards and relevant laws and regulations and provisions of the implementation of the requirements, and not lower than the original manufacturer's quality assurance regulations and relevant supply standards for the supply of counterfeit and shoddy products.
after-sales service
1.Promise to provide permanent maintenance services, vehicle warranty for one year, after the warranty period to provide paid services.
2.Regular return visit maintenance: Telephone return visit every 3 months, timely understanding of the buyer's opinions and suggestions, in order to promote the company's after-sales service work to further improve.
After-sales proces
1.The customer provides product information, unit information and contact information by telephone or email message, and describes the cause of the problem to the manufacturer.
2.After receiving the information, the manufacturer will try to deal with it as soon as possible.
3.Provide a solution to the problem described by the customer until the customer is satisfied.
Workshop pictures
