DQ-RG-5-440-WZ
Aluminum Alloy
Electroplating
Non-Customized
Standard
Forklift Fuel Transducer
Dq-Rg-5-440-Wz
Hangcha Forklift 20-30h
Cost-Effective Forklift Aftemarket Parts
Leading Forklift Parts
Corrugated Carton with Plywood Case
48*10*10 cm
China
9026100000
Product Description
Product Title: Forklift Fuel Transducer
Product Model: DQ-RG-5-440-WZ
Product Model: DQ-RG-5-440-WZ
| Item | Description |
| Product Name | Forklift Fuel Transducer |
| P/N | DQ-RG-5-440-WZ |
| Applied Model | Hangcha Forklift 20-30H HC/L=440 tube type |
| Net Weight (kg) | 0.27 |
| Gross Weight (kg) | 0.3 |
| Qty per Carton | 1 |
| Carton Size (cm) | 48*10*10 |
Installation Steps and Precautions for the HELI Forklift Fuel Sensor
- Turn Off the Forklift: Ensure the forklift is turned off, the ignition switch is off, and the power is disconnected to ensure safety.
- Drain the Fuel: Locate the fuel tank outlet, open the valve, and drain the fuel to prevent spillage during installation.
- Locate the Installation Point: Find the designated installation point, loosen the screws on the sensor base, and place the base in the specified location.
- Insert the Sensor: Insert the sensor body into the socket on the base and secure the sensor to the base.
- Connect the Circuit: Connect the sensor to the electrical circuit according to installation specifications and adjust the wiring harness, ensuring there is sufficient slack between the harness and components.
- Check the Installation: Verify that the sensor is securely fixed and the wiring is properly connected. Start the engine and test the fuel flow to ensure proper operation.
