A22J3-02021
Carbon Steel
Baking Paint
Non-Customized
Standard
Forklift Front Axle Housing
A22j3-02021
Heli Forklift 3t, JAC Cpcd30 Lift Truck
Cost-Effective Forklift OEM Parts
Leading Forklift Parts
Inside PVC Bag, Outside Carton
125*43*30 CM
China
8431209000
Product Description
Product Title: Forklift Front Axle Housing
Product Model: A22J3-02021 for HELI JAC Forklift 3T
Forklift Driving Axle Case Inspection and Repair
Inspecting the forklift driving axle case regularly is strongly recommended when you do the overhaul for your forklift lift, here are checking requirements:
Product Model: A22J3-02021 for HELI JAC Forklift 3T
| Item | Description |
| Product Name | Forklift Front Axle Housing |
| P/N | A22J3-02021 |
| Applied Model | HELI Forklift 3T, JAC CPCD30 Lift Truck |
| Net Weight (kg) | 58 |
| Gross Weight (kg) | 68 |
| Qty per Carton | 1 |
| Carton Size (cm) | 125*43*30 |
Forklift Driving Axle Case Inspection and Repair
Inspecting the forklift driving axle case regularly is strongly recommended when you do the overhaul for your forklift lift, here are checking requirements:
- The misalignment of the inner and outer bearing brackets at both ends of the forklift driving axle housing should not exceed 0.01mm; the vertical error of the bearing seat neck and its thrust end face should not exceed 0.05mm;
- The bearing seat neck should be perpendicular to the edge plane of the brake base plate, and the vertical error should be no more than 0.1mm.
- Screw hole thread damage should not be more than 2 deductions, more than when can be repaired or welded repair.
- When the oil seal wear exceeds 0.15mm, it can be repaired.
- When the shaft journal wear of the axle shaft sleeve rolling bearing is greater than 0.04mm, it can be chrome plated or surfacing repaired.
- When axle bushings have cracks and defects of any nature, they should be replaced.
- The wear of the inner and outer end bracket holes of the forklift driving axle case driver shaft sleeve shall not be greater than 0.06mm, otherwise, the driving axle sleeve journal can be chrome plated or expanded to a repair size.
- When the drive axle housing is broken, it should be replaced.
- The wear of the inner and outer end bracket holes of the forklift driving axle housing half shaft sleeve shall not be greater than 0.06mm, otherwise, the axle sleeve journal can be chrome plated or expanded to a repair size.
- When the drive axle housing is cracked, it should be replaced.
