Mining Scraper Winch Used for Raking Transportation Explosion Rake Mine Winch

Introduction of Mining Scraper Winch

Uses:
2JPB-55 rake mine winch is mainly used in metal mines and other mines for ore transportation and filling work in the pit or open air. It is mainly used for horizontal rake transportation, can also be used for inclination angle is not big slope rake transportation, but can not be used as lifting equipment.
Components: rake mine winch is mainly composed of winch, rake bucket, pulley three main parts. Winch internal deceleration device, main drum, vice drum, manipulation device, rope guiding device and motor and other components.
Second, the preparation before operation
Clear obstacles: clear the obstacles around the rake mine winch and the rake transportation channel to ensure a safe operating environment.
Check the equipment:
Check whether the winch is stable, whether the screws of each ministry are loose, and there shall be no water dripping on the body and switch.
Check whether the electrical lines and switches are complete and intact to ensure safety.
Check whether the brake part is flexible and reliable, and whether the body bolts are tight.
Check whether the connection of wire rope and rake bucket, pulley suspension bolt and rake bucket installation are tight, and whether the pulley is flexible and hangs firmly. Whether the wire rope is twisted and broken.
Empty car test run: rotate the rotating part by hand for 2-3 revolutions, and drive the car only after it is flexible and free from jamming, and run the car for 1 minute to understand the operation of the equipment.zmwm21

Parameter of Mining Scraper Winch