GBM-HP-20-004
Oversea Sevice
12months/24 Months
GBM
Nude Packing
20cbm
Shanghai, China
Product Description
GBM 20CBM mobile eco-hopper used in port for handling clinker
Dust-proof Hopper Detail
This equipment is mainly used for the unloading and loading of bulk cargoes. The bulk cargo is grabbed by a portal grab crane, and the grabbing materials are run to the loading and unloading by the relevant operation mechanism of the gate grab crane. Above the system, the grab is opened by the PLC control system of the portal crane and the bulk cargo is unloaded into the unloading funnel of the loading and unloading system; an electrohydraulic push rod control device is located on the discharge opening of the unloading funnel. It is used to control the flow of material, so that it is safe and effective when loading the vehicle, which greatly improves work efficiency.The hopper of this equipment is divided into two layers, because the lower hopper of the upper hopper is relatively large, the hopper is not easy to raise dust, the suction port of the dust collector is arranged in the middle of the two layers, and the upper and lower material ports are sealed and dusted with a pulse bag filter.The hopper designed by our company is mainly used for loading and unloading coal slag, cement powder and iron powder, and can be designed according to the requirements of customers. The dedusting device, electro-hydraulic door device and vibration feeding device can be installed on the funnel, which greatly improves the Handling efficiency. This equipment includes bagging machine, main support steel frame, gravity feed funnel, power distribution box, discharge chute, bag holder, pneumatic system and some optional devices such as dust collector, empty Presses, etc. Among them, the DCS bagging machine consists of feeders, weights, etc. This device is used for weighing and bagging various small particle materials such as grain, dried cassava, fertilizer, PVC powder, small pellet feed, etc. Small particles of ore, bauxite and so on.
Technical parameter
3.1 Main parameter
| Model | Mobile type dust proof hopper system |
| Working type | continuous |
| Total standard height | 11100mm |
| Clearance height | see drawing |
| Total span | 12106x7000 mm(only For reference) |
| Material rated weight inside of the hopper | 40000 kg |
| Total weight | Abt 80650 kg |
| Equipment dimension | see drawing |
3.2 Hopper frame
| Total height | 11100 mm |
| Span | see drawing |
| Material | Q345B |
| Capacity | About 35 m³ |
| Effective capacity | About 35 m³ |
| Max inlet dimension | 5400 x 5400 mm |
| Outlet dimension | 800x800 mm |
| Material | T10_Q345B |
| Space between gratings | 300mm X 300mm/T16mm x 160mm |
| Grating spec. | 10_Q345 |
3.5 Ladder, platform, corridor
| Ladder form | The equipment adopts cat ladder, straight ladder, and safety protection bar for ladder higher than 2m |
| Platform material | Grid plate |
| Corridor material | Grid plate |
3.6 Electric putter
| Power | 5.5 KW | Horizontral valve open size |
| Pulley quality | 2 groups | |
| Opening speed | t<60S | |
3.7 Electric winch
| Power | 1.5KW | To controlle the height telescopic slip barrel |
| Pulley quantity | 1 group | |
| Opening speed | t<40S | |
3.8 Dust collector technical parameter
| Device model | 1 set of hopper | A model |
| Specification | Inlet flow rate | 64000m³/h |
| Total filtered area | 660 squre meter | |
| Centrifugal fan | Power:75 KW | 1 set |
3.9 Electric control
| Power supply | 3 phase , 4 lines |
| Power voltage | 440 V |
| Power frequency | 60 Hz |
| Control method | Dust proof device controlled by PLC Others by electrical control |
3.10 Traveling motors
| Power supply | 7.5KW |
| Quantity | 2 |
3.11Others
| Paint | Color to be decided further, thickness 180 μm | |
| Bearing | Domestic made parts | |
| Cabin | With Shock absorber, air conditioner, chair, noise insulation, speaker, control desk | |
| Control system(Opreating room) | Signal display platform | 1 set |
| Manual operation | 1 set | |
| Air compressor | 1 set x 15kw (piston type air compressor) | |
| Lighting | 0.25kw x 12 pcs | |
Design drawing :
Photo for reference
FAQ
For more information, how to contact with GBM ?
*What material do you need unloading ?
* Will you want fixed hopper or movable hopper ?
* If you want movable hopper, will you want rubber tyre mobile hopper or railway mobile hopper ?
* What kind of hopper you need ? Non dust proof or dust proof hopper ?
* What is the power in your country ? Will you need cable ? What's the length of cable will you need please ?
* Do you have any requirement on delivery period or certificate please ?
