Spreader is an intermediate lifting accessory positioned between a hoist and a load. They act as a crosspiece for spacing the hooks or chains that hold loads such as bundles, rolls, cylinders and machinery.It enables the load to be hooked up, guaranteeing optimum stability and reduced headroom.
Lifting electromagnet, also called as electric lifting magnet, is one of the most commonly used type of magnetic lifting devices.A lifting electromagnet is the use of electromagnetism to lift / handle ferrous magnetic materials. It's magnetic field is generated or produced by an electric current through the magnet.When the current turns on, the electromagnet will firmly hold the steel object and lift it to the designated place. Cut off the current, the magnetism disappears, and the steel items are put down.Industrial magnets for cranes are versatile, compact, easy to operate.
Lifting magnets has different types, different series lifting magnet is suitable for different steel products such as steel scraps, steel bar, steel billet,steel pipe etc,.Lifting magnets for cranes are commonly used in steel mills, foundries, coil and pipe distributors, scrap- and shipyards, loading docks, warehouses, and other users of applicable steel products.
- Fully sealed structure, good moisture-proof performance.
- Through computer optimized design, the structure is reasonable, light weight, large suction and low energy consumption.
- High insulation level, the unique process of insulation treatment improves the electrical and mechanical properties of the coil, and the heat resistance level of the insulation material can reach Class C.
- Different structures and parameters are adopted for different inhaled objects, which can meet the needs of users extensively.
- Easy to install, operate and maintain.Suitable for lifting scrap steel and scrap.
- The product is optimized by computer, the magnetic circuit is more scientific and reasonable, the air gap magnetic density is large, and the magnetic penetration depth is deep.
- Simple structure, safe and reliable.The lifting electromagnet has the characteristics of large magnetic potential and large magnetic penetration depth.
- Electromagnet coil adopts low temperature rise design, with little change in suction in cold and hot states. The coil wire is made of high-quality oxide film flat aluminum tape with an insulation grade of C, which ensures the service life of the coil.
- The coil protection plate is made of stainless steel, which has good wear resistance and high strength, and protects the coil from bottom impact and avoids damage to the coil.
| Technical Data of Lifting Electromagnet | |||||||||||
| Model | Cold-state power(kw) | Current A Cold/hot state | Overall dimension(mm) | Mass(kg) | Lifting capacity(kg) | ||||||
| A | B | F | E | G | Steel ball | Casting ingot | Turnings | ||||
| MW5-50L/1 | 2.6 | 11.8/7.7 | 500 | 700 | 160 | 90 | 25 | 220 | 1200 | 220/130 | 80/65 |
| MW5-60L/1 | 3.0 | 13.6/8.9 | 600 | 750 | 160 | 90 | 25 | 340 | 2000 | 290/170 | 95/80 |
| MW5-70L/1 | 3.3 | 15/9.8 | 700 | 800 | 160 | 90 | 30 | 490 | 2500 | 380/200 | 120/100 |
| MW5-80L/1 | 4.0 | 18/12 | 800 | 800 | 160 | 90 | 30 | 620 | 3000 | 480/250 | 150/130 |
| MW5-90L/1 | 5.9 | 26.8/17.5 | 900 | 1090 | 200 | 125 | 40 | 800 | 4500 | 600/400 | 250/200 |
| MW5-110L/1 | 7.7 | 35/22.8 | 1100 | 1140 | 220 | 150 | 45 | 1350 | 6500 | 1000/800 | 450/400 |
| MW5-120L/1 | 10 | 45.5/29.5 | 1200 | 1100 | 220 | 150 | 45 | 1700 | 7500 | 1300/1000 | 650/500 |
| MW5-130L/1 | 12 | 54.5/35.5 | 1300 | 1240 | 250 | 175 | 50 | 2010 | 8500 | 1400/1100 | 700/600 |
| MW5-150L/1 | 15.6 | 70.9/46.1 | 1500 | 1250 | 350 | 210 | 60 | 2830 | 11000 | 1900/1500 | 1100/900 |
| MW5-165L/1 | 16.5 | 75/48.8 | 1650 | 1590 | 370 | 230 | 75 | 3200 | 12500 | 2300/1800 | 1300/1100 |
| MW5-180L/1 | 22.5 | 102.3/66.5 | 1800 | 1490 | 370 | 230 | 75 | 4230 | 14500 | 2750/2100 | 1600/1350 |
| MW5-210L/1 | 28.4 | 129/84 | 2100 | 1860 | 400 | 250 | 80 | 7000 | 21000 | 3500/2800 | 2200/1850 |
| MW5-240L/1 | 33.9 | 154/100 | 2400 | 2020 | 450 | 280 | 90 | 9000 | 26000 | 4800/3800 | 2850/2250 |
| MW5-260L/1 | 35.6 | 162/105 | 2600 | 2100 | 450 | 280 | 90 | 10100 | 30000 | 6100/4900 | 3600/3850 |
| MW5-280L/1 | 39 | 178/116 | 2800 | 2700 | 500 | 300 | 100 | 12450 | 34000 | 7100/5700 | 4450/3400 |
| MW5-300L/1 | 41.6 | 189/123 | 3000 | 2300 | 500 | 300 | 100 | 14980 | 39000 | 8350/6700 | 5250/4100 |
Lifting electromagnet matched with various cranes to provide ideal material handling solution for ferrous materials such as steel, iron, ship manufacturing, heavy machinery, steel warehouses, ports and railways field, etc. for cast ingot, steel ball, pig iron, machine chip, various kinds of steel scraps, return scraps, cropping, baling scraps and so on in foundry factories and iron powder in coal washeries. During slag disposal process, it can remove large size of iron at initial step. It can be used in waste steel recovery department and steelmaking workshop.
Q1: Are you Manufacturer or Trading Company?
A1:We are an integrated industrial and trade enterprises. We have our own R&D team, factory and marketing department.
A2: Our Crane can design and manufacture base on FEM, CMAA, ISO EN, GB standard.
Q3: How do you ensure your product quality?
A3: All our processes strictly adhere to ISO-9001 procedures, which include Material Traceability, ISO WPQR and welder certificate, Measuring Device Calibration, NDT for the welding, and full assembling and load testing before delivery.
Q4: How can I make payment?
A4: We accept T/T bank transfer, L/C, Paypal.
Q5: How can I assembly the cranes in my factory?
A5: We suggest you to recruit a crane service team in local to install the crane base on our Installation Guideline and User manual. If cannot, we can send engineer to your factory to guide you do the installation with extra charge, and the transportation, accommodation, translator shall be covered by your side also.
Q6: What is the warranty period, and how can I claim warranty If my crane have any issue?
A6: Our warranty period is 12 months after cargo leave China port. If the crane have any issue, our after-sales team and engineer will help you solve the issue by email or Video conference. If the defect is caused by quality issue, we will ship the spare parts to you by air to help you fixed it as soon as possible.
Q7: Do you accept OEM business?
A7: Sure, we do many OEM productions for some famous crane brand and customers around the world.
Q8: What about shipping?
A8: We recommend small batch by the way of air or LCL, but large delivery by the way of container or bulk vessel.
Q9: What about delivery time?
A9: Different capacity crane and components have different estimated delivery time, generally speaking, around 4 weeks to 8 weeks.
Q10: What is your company policy if we want to distribute NANTE product in our market?
A10: Firstly, thank you for your interest to promote NANTE brand, we have distributors in 50+ countries, pleaes no hesitate to contact us for the detail discussions, as we have different policies for the different target markets. Surely, you are welcomed to visit our factory and let's talk face to face.
