Product Name:High quality OEM ODM flame retardant and impact resistant EV charging cable GB DC Connector with TUV CE
Scope of Application:
This cable has been widely used in New Energy Vehicle/Car.
Electric Vehicle Charging Station Technical Parameters:
| Rated current | 125A or250A |
| Operating voltage | 400/750V DC |
| Insulation resistance | >2000MΩ(DC1000V) |
| Terminal temperature rise | <50K |
| Withstand voltage | 3200V |
| Vibration resistance | Meet JDQ 53.3 requirements |
| Contact impedance | 0.5MΩ Max |
| Mechanical life | No-load plug in/pull out>10000times |
| Insertion and extraction | 70N |
Product Characteristics
1.Concise and flowing appearance , comfortable handle , safe and convenient operation.
2.Our EV-charger meets IEC 62196-2 standard.
3.Insulation resistance can reach more than 500MΩ.
4.EV-charger cabling are used in electric vehicle charging , suitable for charging in mode 3.
5.Low temperature rise: the standard requirement is less than 50K.
6.Good electrical performance.
Caution ! ! !
1.Don't step on, fold or knot the cable.
2.Don't drop the EV charging box or place a heavy object on it.
3.Don't place the charging cable near high temperature object when charging.
4.Don't operate the EVSE in temperatures beyond its operating range of -25°C to 55C.
5. Power-supply side input cable should be at least 3*2.5mm (recommended 3*4mm), with a standard.
16A socket. It is suggested that the power distribution is done by the professionals.
6.Don't put fingers into the charging connector when the power plug is still connecting to the power.
7.Don't use this EV charger when the cable is damaged.
8.Don't use this device with an extension cord or adaptor.
About us:
Changsha Sibel Electronic Technology Co.,Ltd.is the leading developer and manufacturer of charging cable in China.It was established in 2017.We focus on Charging cable, auto connectors & Terminals.Our output is more than 500000pcs
