Brand 4t Telescopic Telehandler with 360 Degree Rotation Bale Clamp Hntr4015
HNTR40 is a multi-purpose rough terrain forklift. It is creative rotate telehandler that is suitable for construction site and
some industry area. HNTR40 adopts diesel engine, hydrostatic transmission, pilot control, 4WD full wheels driving, rear wheel steering with out trigger, hydraulic stabilizer for boom placing, stretching and withdrawing, lifting height 15m, rated load capacity 4tons, 360 degree rotate chassis, Max horizontal reach 10500mm(front end of front wheel to load center).It can be used as telescopic forklift loader, crane loader or working platform
Main application:
Channel application: hoisting and lagging jack. Aerial work platform with Arch manipulator, Arch manipulator can grab the arch firmly, the stretching and withdrawing of the telehandler boom can realize the horizontal and height adjustment, at the same time, the swinging hydraulic cylinder of the arch manipulator can realize the accurate position of the workpiece
Industrial company: load and unload the pallet cargo to container, unload stack and short-distance transport for all kinds of container cargo Agricultural and animal husbandry:transport of straw bundle and forage feed, clear the rubbish Municipal and fire-fighting: use aerial work platform for municipal operation, fire-fighting and emergency action
Performance | Technical data | |
Basic parameter | Max. Lifting height (with out trigger) | 15m |
Rated load capacity (lifting) | 4000kg | |
Max. Horizontal reach | 10.5m | |
Rated load @ Max. Horizontal reach (with out trigger) | 800kg | |
Load center | 500mm | |
Operating weight (unloaded with fork) | 16500 kg | |
Max. Travailing speed (km/hour) | 25 km/h | |
Swinging speed | 3 rpm(1500rpm) | |
Transmission system | Transmission type | Hydraulic static transmission |
Hydraulic (high speed / low speed) | 2 / 2 | |
Transmission gears | 2F/2R | |
Gradeability | 30% | |
Traction force | 80kN | |
System capacity | Hydraulic oil tank capacity | 300L |
Fuel tank capacity | 200L | |
Engine | Model | DF Cum-mins QSB3.9-C125-30 |
Rated power | 93kW/2200rpm | |
Torque | 480 Nm / 1350r/min | |
Fuel type | Diesel | |
Emission standard | National III | |
Air inlet cooling | Air-air intercooler | |
Hydraulic system | Pressure | 28 MPa |
flow | 300 L/min | |
Steering system | Steering gear type | load sensing full hydraulic steering |
Pressure | 16 MPa | |
Rear axle steering type | Transverse hydraulic cylinder steering structure | |
Steering angle | 40° | |
Brake type | Service brake | Clamp-disc brake |
Brake air pressure | 0.684-0.785 MPa | |
Parking brake | Air push drum brake | |
Main dimension | Overall height | 3300mm |
Overall width | 2570mm | |
Overall length(with fork) | 7330mm | |
Wheel base | 2800mm | |
Front wheel tread | 2030mm | |
Rear wheel tread | 2030mm | |
Ground clearance (out trigger) | 350mm | |
Turning radius (out side) | ≥4800mm | |
Operating position | Central | |
Seating type | Car type | |
Aerial working platform | Length*width*height | 1200×800×970mm |
Out trigger type | Hydraulic out trigger No. | 2F/2R |
Working boom | Telescopic working boom | 3-setion |
Fork | Length*width*thickness | 1000×122×50mm |
Max. Distance between two forks | 710mm | |
Front/Rear tilt degree | 12°/ 120° | |
Standard tire(inflatable) | (Front/Rear) Wheel Number | 2/2 |
(Front/Rear) driving wheel Number | 2/0 | |
(Front/Rear) tire dimension | 45×16-20 (36PR) | |
