TS256
Third-Party Service
12 Months
Wheel Tractor
Farm Tractor, Garden Tractor, Lawn Tractor
ISO, CCC, ISO/TS16949
4WD
Gas / Diesel
6-10 Years
Small
Red
New
Locked Pedal
1705
Hydraulic Steering
Sliding Gear Shift
Mingsin
3105*1430*2090
China
8701941010
Product Description
| Model | TS256 Tractor |
| Drive Type | 4×4 |
| Engine | |
| Engine Manufacturer | Wuzheng Shantuo Engine Co.,Ltd. |
| Engine Model | FD295TA |
| Engine Type | inline,vertical,water-cooled,four-stroke |
| Cylinder diameter(mm) | 95 |
| Stroke(mm) | 115 |
| Max Torque(N·m)/Revolving Speed(rpm) | ≥96.8/≤1575 |
| Displacement(L) | 1.63 |
| Fuel Tank Capacity(L) | 51 |
| Engine Rated Power (kW/rpm) | 18.5 |
| Rated Operating Conditions Fuel Consumption Rate(g/kW·h) | ≤250 |
| Drive Train | |
| Clutch | Dry,single-stage |
| Standard PTO speed(rpm) | (540,1000)/(750,1000)/(540,750) |
| Gears | 8F+2R/10F+2R |
| Speed range(Km) | 1.73~22.04 |
| Steering type | hydraulic steering |
| Gear Shift Mode | sliding gear shift |
| Break System | |
| Service Brake | pedal,mechanical drive,closed shoe type |
| Parking Brake | locked pedal |
| Hydraulic System | |
| Hydraulic Output Flow(L/min) | 30 |
| Hydraulic Output Valve | 1 way(optional) |
| Working Device | |
| Three-Point Suspension | postposition,Category I |
| Max.Lifting Capacity(kN) | ≥4.16 |
| Tillage Depth Adjustment | position adjustable |
| General Parameter | |
| Overall Dimension(L×W×H)mm | / |
| 3105×1430×2095 | |
| Wheelbase(mm) | 1757 |
| Min. operating weight(kg) | / |
| 1340 | |
| Min. Ground Clearance(mm) | 335 |
| Min.turning radius(mm) | 3000 |
| Maximum Pull(KN) | 7.35 |
| Front Tire | 6.0-16 |
| Rear Tire | 9.5-24 |
| Optional Disposition | |
| dual-stage clutch, shuttle gear(creeper gear), swing draw bar, draft and positional lifter, rear counter weight, ROPS with canopy, 1 group hydraulic output | |
1. Material inspection before production to avoid any potential problem from the very beginning.
2. Inspection for half-finished products during order production to find the problem earlier if any;
3. Inspection for finished products after production to make sure the products comply with customer's reguirement.
Department introduction of QC/Technical Support
In order to get super quality, we have special QC department to control the product quality. Thisdepartment is composed by experienced engineers who can offer us strong technical support easily.The engineers will inspect product quality both in order production and after order production tomake sure each shipment we send to our customers is in the best status, With their strict quality control,our consistent quality wins us more and more orders from our international customers.
