* Perfect performance satisfy your requirements
It could provide you different range of speed with the transmission with 8 forward gears and 8 reverse gears for your different tasks. With the high range for travel speed, medium range for mowing and low range for hard-pull applications and loader work, you'll always have the power you need for the task at hand. You could make a proper gear selection in a wide speed range according to the changes of circumstances, the function of different farm implements, the changing of speed, undulating of the ground, which makes full use of the performance of the power system and meets your requirements better.
* Quick-Shifting -Shuttle system
Easily change direction of travel with the quick-shifting -shuttle system. Shift from forward to reverse in different speeds without stopping. You'll greatly increase loader work productivity and make your entire to-do list easier.
Compact body design, small turning radius , more lightweight and flexible hydraulic power steering, makes it easy to operate and greatly reduces the your fatigue.
* Durable performance
Anti-rollover safety frame can effectively ensure the safety of the driver when the tractor rollover. It also can be equipped with fully sealed cab.
Chassis designed in mature technology gives you an excellent durable performance.
* Hydraulic output
Hydraulic output is optional, making your tractor match more kinds of farm machinery and implements, to meet your different demands.
| Model | TS450 | TS454 | |
| Drive Type | 4x2 | 4x4 | |
| Engine | |||
| Engine Manufacturer | Jiangsu,Jianghuai | Jiangsu,Jianghuai | |
| Engine Model | JD495BT3 | JD495BT3 | |
| Engine Type | inline,vertical,water-cooled,four-stroke | inline,vertical,water-cooled,four-stroke | |
| Cylinder diameter(mm) | 95 | 95 | |
| Stroke(mm) | 105 | 105 | |
| Max Torque(N·m)/Revolving Speed(rpm) | ≥158/1725 | ≥158/1725 | |
| Displacement(L) | 3.17 | 3.17 | |
| Fuel Tank Capacity(L) | 80 | 80 | |
| Engine Rated Power (kW/rpm) | 33.1 | 33.1 | |
| Rated Operating Conditions Fuel Consumption Rate(g/kW·h) | ≤245 | ≤245 | |
| Drive Train | |||
| Clutch | dry,single disc,dual stage,constant meshed | dry,single disc,dual stage,constant meshed | |
| Standard PTO speed(rpm) | (540,1000)/(720,1000)/(540,720) | (540,1000)/(720,1000)/(540,720) | |
| Gears | 8F+8R | 8F+8R | |
| Speed range(Km) | 2.59~29.42 | 2.59~29.42 | |
| Steering type | hydraulic steering | hydraulic steering | |
| Gear Shift Mode | meshing gear shift | meshing gear shift | |
| Break System | |||
| Service Brake | mechanical,wet,disc | mechanical,wet,disc | |
| Parking Brake | locked pedal | locked pedal | |
| Hydraulic System | |||
| Hydraulic Output Flow(L/min) | 30 | 30 | |
| Hydraulic Output Valve | 1 /2 ways | 1 /2 ways | |
| Working Device | |||
| Three-Point Suspension | postposition,Category I | postposition,Category I | |
| Max.Lifting Capacity(kN) | ≥7.5 | ≥7.5 | |
| Tillage Depth Adjustment | draft and position adjustable | draft and position adjustable | |
| General Parameter | |||
| Overall Dimension(L×W×H)mm | With cab | 3885x1708x2550 | 3885x1708x2550 |
| Without cab | 3885x1708x2200 | 3885x1708x2200 | |
| Wheelbase(mm) | 2049 | 2068 | |
| Min. operating weight(kg) | With cab | 2330 | 2420 |
| Without cab | 1950 | 2040 | |
| Min. Ground Clearance(mm) | 420 | 360 | |
| Min.turning radius(mm) | 3400 | 3500 | |
| Maximum Pull(KN) | 9.1 | 12.8 | |
| Front Tire | 6.0-16 | 8.3-20 | |
| Rear Tire | 12.4-28 | 12.4-28 | |
| Optional Disposition | |||
| shuttle gear(creeper gear), paddy tire, swing draw bar, cab or ROPS with canopy, air brake, 1 or 2 group hydraulic output | shuttle gear(creeper gear), paddy tire, swing draw bar, cab or ROPS with canopy, air brake, 1 or 2 group hydraulic output | ||
QC Flow:
1. Material inspection before production to avoid any potential problem from the very beginning.
2. Inspection for half-finished products during order production to find the problem earlier if any;
3. Inspection for finished products after production to make sure the products comply with customer's requirement.
Department Introduction of QC / Technical Support:
In order to get super quality, we have special QC department to control the product quality. This department is composed by experienced engineers who can offer us strong technical support easily. The engineers will inspect product quality both in order production and after order production to make sure each shipment we send to our customers is in the best status. With their strict quality control, our consistent quality wins us more and more orders from our international customers.
Full Service and Product Warranty:
We offer our customers technical assistance and a full one year warranty on all products covering all manufacturing defects. ME Our manufacturing facility is completely computerized to provide our customers efficiency, reliability, high quality and timely shipments. Spare Parts:We can supply spare parts within 15 business days or sooner. Currently, part numbers are not available on-line. You may however determine the part number from your Parts Book or, if it is a simple part, you may describe the part and send us an order online. If you are not sure, please Contact Us . Shipment: We can ship from our port in Qingdao or Shanghai, China to anywhere in the world within short days.
Q1: Are you a factory or trading company?
We have our factory for the farm machines and we also have our own trading company with self-supported import and export right.
Q2: How can I trust on your company?
We are a fully registered manufacture and exporting company by China Export Registration Authorities. Moreover, our products have been exporting to a number of countries including Switzerland, Russia, Spain, Netherlands, Australia, Peru, Thailand, Pakistan, Indonesia, Tanzania, Nigeria, South Africa, Sudan, Congo etc.
Q3: Where is your factory located? How can I visit there?
Our factory is located in Linyi City, Shandong Province, China. About 1 hour away from Linyi Airport, 4 hours away from Qingdao airport. All our clients are warmly welcomed to visit us!
Q4: How can I place an order from your website?
It is very easy.Once you find the implement you need on our website and place an inquiry against it, or, get to the inquiry section and leave us a message there with name, country and phone number, we will get in touch with you at the earliest.
Q5: How can I make the payment?
Payment is made via Telegraphic Transfer (T/T) through the bank against the proforma invoice.
30% as prepayment and the balance when the goods are ready for shipping.
Q6: What's the Payment terms?
T/T, L/C or some other ways payment method.
Q7: At which port do you usually ship the good?
We usually ship goods via Qingdao port of China.
Q8. How about the Warranty ?
12 months warranty from the time of the goods arrive at destination.
