TG1804 Tractors
Main Features
* A transmission even smoother than your car`s
With crawling gear structure installed fully synchronizer main transmission and power shift sub-transmission, which has total gear number up to 40 forward gear and 40 reverse gear, covers the speed range 0.36-47.77km / h. It could provide you different range of speed for your different tasks. With the high range for travel speed, medium range for mowing and low range for hard-pull applications and loader work, you'll always have the power you need for the task at hand.
Electrical fluid control wet multi-plate disc clutch with chassis fault diagnosis system can diagnose chassis fault itself, enhance the ability of continuous operation, give you a superior efficiency.
* An air suspension seat better than your Sofa.
Air suspension seat, can effectively reduce the turbulence generated during operation of the vehicle, deliver a more comfortable and pleasant driving experience. Four-direction adjustable steering wheel, six-direction adjustable seat, helps you find the most suitable driving position.
Full vision cab with frameless glass cover, provides maximum field of vision for you and makes it safer to operate the tractor.
Using sound-absorbing insulation materials, to seal the whole cab, gives you an excellent sealing performance, effectively cut off the noise and heat from external environment.
The operator-oriented designing idea and ergonomic interior layout, make every button around you clearly marked and easy to touch. An easy-to-reach control lever controls the rear implements operating height and makes sure it's always right where you need it. Equipped with Air-conditioner, brings you a more comfortable and pleasant driving experience.
Tilting traction structure effectively reduces the impact load and tractor vibration, the driving experience is more comfortable while making the connection structure more durable.
* Excellent autopilot system liberates your hands and brain
Excellent autopilot system liberates your hands and brain. When the autopilot system controls machine ridge, planting, spraying, harvesting and other agricultural operations, the convergence of accuracy for the spacing is up to 2 cm. It can greatly reduce the cost of crop production inputs, effectively improve the agronomic quality of operations and reduce fatigue. That's getting every job done faster than ever
Electronically controlled clutch system, it means you can smoothly transform two-wheel drive and four-wheel drive or shift the forward gear and reverse gear just by pressing a button without stopping. So what you need to do next is enjoying your controlling, even during the toughest tasks, allowing you to work smarter and reduce fatigue.
Hydraulic power steering systems with reverse camera makes steering smoother and more flexible, reduce fatigue.
Easily change direction of travel with the quick-shifting -shuttle system. Shift from forward to reverse in different speeds without stopping. You'll greatly increase loader work productivity and make your entire to-do list easier.
Compact body design, small turning radius , more lightweight and flexible hydraulic power steering, makes it easy to operate and greatly reduces the your fatigue.
* 4-way hydraulic output
Equipped with 4-way hydraulic output, makes your tractor match more kinds of farm implements. That means you can always get the function you need for whatever task you may face.
Technical Specifications
| Model | TS1804 | TS2004 | TS2304 | |
| Drive Type | 4×4 | |||
| Engine | ||||
| Engine Manufacturer | Weichai Power Co.,Ltd. | Weichai Power Co.,Ltd. | DEUTZ | |
| Engine Model | WP6T180E200 | WP6T200E200 | BF06M1013FC | |
| Engine Type | turbocharge-Intercooled | |||
| Max Torque(N·m)/Revolving Speed(rpm) | 830/1400-1600 | 860/1400-1600 | 1008/1300-1500 | |
| Displacement(L) | 6.75 | 6.75 | 7.146 | |
| Fuel Tank Capacity(L) | 320 | 320 | 500 | |
| Engine Rated Power (kW/rpm) | 132.5/2200 | 147/2200 | 188/2200 | |
| Rated Operating Conditions Fuel Consumption Rate(g/kW·h) | 230 | 230 | ||
| Drive Train | ||||
| Clutch | electric control wet multiple disc | |||
| Standard PTO speed(rpm) | 540/540E/1000/1000E | 540/540E/1000/1000E | 750/1000 | |
| Gears | 40F+40R | |||
| Steering Type | hydraulic steering | |||
| Gear Shift Mode | main transmission synchronizer shift, auxiliary transmission power shift | |||
| Break System | ||||
| Service Brake | pedal,hydraulic transmission, multi-disc,wet | |||
| Parking Brake | handle operation, multi friction plate | |||
| Hydraulic System | ||||
| Hydraulic Output Flow(L/min) | 65 | 80 | 80 | |
| Hydraulic Output Valve | 3 ways | 3 ways | 4 ways | |
| Working Device | ||||
| Three-Point Suspension | Category III | |||
| Max.Lifting Capacity(kN) | 31.8 | 35.28 | 40.6 | |
| Tillage Depth Adjustment | draft/ position/draft and position,floating adjustable | |||
| General Parameter | ||||
| Overall Dimension(L×W×H)mm | With cab | 5750×2320×3210 | 5750×2320×3210 | 6046×2727×3322 |
| Without cab | / | |||
| Wheelbase(mm) | 2880 | 2950 | 3172 | |
| Min. Operating Weight(kg) | With cab | 6300 | 6500 | 7980 |
| Without cab | / | |||
| Min. Ground Clearance(mm) | 400 | 400 | 350 | |
| Min.turning radius(mm) | 7000 | 8500 | 9150 | |
| Front Tire | 16.9-30 | 16.9-30 | 460/85R34 | |
| Rear Tire | 20.8-38 | 20.8-38 | 520/85R42 | |
QC Flow:
2. Inspection for half-finished products during order production to find the problem earlier if any;
3. Inspection for finished products after production to make sure the products comply with customer's requirement.
Department Introduction of QC / Technical Support:
In order to get super quality, we have special QC department to control the product quality. This department is composed by experienced engineers who can offer us strong technical support easily. The engineers will inspect product quality both in order production and after order production to make sure each shipment we send to our customers is in the best status. With their strict quality control, our consistent quality wins us more and more orders from our international customers.
Full Service and Product Warranty:
We offer our customers technical assistance and a full one year warranty on all products covering all manufacturing defects. ME Our manufacturing facility is completely computerized to provide our customers efficiency, reliability, high quality and timely shipments. Spare Parts:We can supply spare parts within 15 business days or sooner. Currently, part numbers are not available on-line. You may however determine the part number from your Parts Book or, if it is a simple part, you may describe the part and send us an order online. If you are not sure, please Contact Us . Shipment: We can ship from our port in Qingdao or Shanghai, China to anywhere in the world within short days
Q1: Are you a factory or trading company?
We have our factory for the farm machines and we also have our own trading company with self-supported import and export right.
Q2: How can I trust on your company?
We are a fully registered manufacture and exporting company by China Export Registration Authorities. Moreover, our products have been exporting to a number of countries including Switzerland, Russia, Spain, Netherlands, Australia, Peru, Thailand, Pakistan, Indonesia, Tanzania, Nigeria, South Africa, Sudan, Congo etc.
Q3: Where is your factory located? How can I visit there?
Our factory is located in Linyi City, Shandong Province, China. About 1 hour away from Linyi Airport, 4 hours away from Qingdao airport. All our clients are warmly welcomed to visit us!
Q4: How can I place an order from your website?
It is very easy.Once you find the implement you need on our website and place an inquiry against it, or, get to the inquiry section and leave us a message there with name, country and phone number, we will get in touch with you at the earliest.
Q5: How can I make the payment?
Payment is made via Telegraphic Transfer (T/T) through the bank against the proforma invoice.
30% as prepayment and the balance when the goods are ready for shipping.
Q6: What's the Payment terms?
T/T, L/C or some other ways payment method.
Q7: At which port do you usually ship the good?
We usually ship goods via Qingdao port of China.
Q8. How about the Warranty ?
12 months warranty from the time of the goods arrive at destination.
