Telescopic Boom Marine Crane Offshore Crane Port Marine Crane

The 3.5t Knuckle telescopic Boom crane offshore crane Hydraulic crane  ship crane Marine Crane controlled by an open platform above the slewing ring. All motions have stepless  speed from 0 to maximum, solo motion each (hoisting ,telescopic ,slewing or luffing) can be done with full load and full speed.

crane Features:

1.Self contained unit with integrated hydraulic power pack.

2.Fail-safe brakes on all movements.

3.Fully enclosed and equipped drivers cabin with integrated heating.

4.Dual pump system with separate hydraulic circuit for hoist and luffing/slewing to ensure efficient cargo handling.

5. The variable speed hoist will automatically adjust to the highest possible speed for the appropriate load.
6. Technology from Germany.
7. Base on many year's experience of crane and harbor equipment.
8. All components are imported from Europe and USA and reach a global service agreement.
9. Suitable for all kinds of ships and low power consumption and high efficiency.
TECHNICAL AGREEMENT
       
 
1. General
 

1. This agreement written in Chinese and English language, must be according to English language if contradiction accrue.

,,.

1. Equipment and material shall be according to the latest standards of  BV Classification Society set in force at the time when the contract is executed and the ship of the specification.

BV .

1. MANUFACTURE shall guarantee the Equipment for a period of 12 months after the ship delivery.

12.

1.  7 Days prior to shop delivery test for the equipment, MANUFACTURE should inform SHIPYARD to attend the test and at the same time submit the inspection/test information to them.

7 ,/.

1. This agreement shall become effective on the date when the contract has been duly executed.

,.
 
2. Basic technical specification

1.  Classification Society:   BV     Navigation: unrestricted

                 :
2.2  Rule and Regulation:    BV     
 
2.3  Certificates required

 Marine products certificate by class
 
 Manufacture certificate

2.4  Standard:   ISO;    GB;    CB
 
2.5  Temperature of environment:   -10⁰C---50⁰C  

2.6  Recommended lubrication oil type for the equipment:  Import
:                     
2.7  Nameplate:   In English
       
2.8  Painting:Surface disposal, short blast to Sa 2.5 
:  ,Sa2.5
      Primer paint: 702 zinc epoxy prime 80μ(dry)
      :    702(80μ)
       Finish paint: To be determined follow the ship owner later
       :()
2.9 Power source: AC   440   V,   60     Hz,     3    Φ;  DC       V
 
 
2.10 Motor insulation class:   F

  2.11 Motor protection class:   IP56

2.12 Motor with cable gland:   With
     
2.13 Motor with earth bolt:   With
            
2.14 Motor with space heater:  With
         
2.15 Motor starting method:   Y/△ start
              Y/△
2.16 Motor in compliance with IEC requirement:    Yes
IEC                       
2.17 Spare parts:   Maker's standard
       
          Spare part box                Spare part list in box
                                       
 
3. Scope of drawing to be supplied

3.1  Approval drawing:      2    Copies
                        
3.2  Working drawing (drawing modified according to comments):    2    Copies
    ()                          
3.3  Final drawing:       2      Copies
                        
3.4 After the contract is executed, MANUFACTURE should submit the approval drawings to SHIPOWNER,SHIPYARD and DESIGNER within 10  days.
   15 ,,.

1. After receiving the approval drawing, SHIPOWNER,SHIPYARD and DESIGNER will return 1 copy of approval drawing with comments. If SHIPOWNER,SHIPYARD and DESIGNER have not returned the approval drawings within  20  days, that means  has no comments on the approval drawing.

,,1, 20 ,,,,.

1. MANUFACTURE should submit the working drawings to SHIPOWNER,SHIPYARD and DESIGNER within  10  days after receiving the approval drawings returned.

, 10 ,.

1. Final drawing should be sent to SHIPYARD together with the equipment.

.

1. Drawings' language:    English language    English & Chinese language

               ()        (,)
4. Content of drawings as following:

No.	Name of drawing	Approval Drawing	Working Drawing	Final Drawing	Remarks
1	Instruction	YES	YES	YES
2	Test program	YES	YES	YES
3	G.A	YES	YES	YES
4	Hydraulic system diagram	YES	YES	YES
5	Electric circuit diagram	YES	YES	YES
6	Overall of electric control box	YES	YES	YES
7	Spare parts list	YES	YES	YES
8	Factory Test report			YES
9	Factory certification			YES
10	Class certification (LR) (LR)			YES

 
5. Technical parameters
 
SWL                          2t

Max. working radius              8.5m

Min. working radius              2m

Hoisting speed                 ~7m/min()  ~12m/min()

Hoisting height                 20m

Slewing speed                  ~0.5r/min

Slewing angle                  360⁰

Luffing time                   ~50s

Working condition

Trim                   ≤2⁰

Heel                   ≤5⁰

Elec-Motor                    YB160M-4-H
   
    Power                         11kW
                            
Speed                         1760r/min
                     
Power Resource                 AC440V/60HZ
           
Start Way                      Y/△
           
Protect Grade                   IP56
       
Insulation Grade                 F
    
 
6. Scope of supply
.
6.1  2t/8.5m Hydraulic swing crane: 6set (inc. Control box).
      2t/8.5m:1().
6.2  Hydraulic component ,such as hydraulic pump,hydraulic motor,control valves use imports , these components have global service network.
,,,,.()
 
7. Certification
 
MANUFACTURE is to supply   BV  certificate.
    BV  .
 
8. After-sales service
 
MANUFACTURE will cooperate with SHIPYARD in assembling and debugging.
,.
 
9. Guarantee period
 
Incase these should be any trouble or damage on the equipment which are due to the responsibility to MANUFACTURE within guarantee period of one year after ship's delivery ,MANUFACTURE will make the repair work for the damage part free of charge.
  ,,.
 
2t/8.5m Hydraulic Crane
 

1. Scope of supply

No.	name	Qty.
1	Boom	1/ 1 set
2	operation platform	1/ 1 set
3	Hoisting winch	1/ 1 set
4	Pedestal	1/ 1 set
5	Luffing cylinder	1/ 1sets
6	Maintenance platform	1/ 1 set
7	Hook	1/ 1 unit
8	Steel wire rope	1/ 1 unit
9	Oil tank	1/ 1 set
10	Pump unit	1/ 1 unit
11	Electrical control box	1/ 1 set

1. Spare parts list

No.	name	Qty
1	High pressure tube	3/ 3 pcs
2	Joint	3/ 3pcs
3	Seal	3/ 3pcs
4	Washer	10/ 10pcs
5	"O" O-ring	10/ 10pcs
6	Fuse	3/ 3pcs
7	Oil Cup	5/ 5pcs

 
 
 
 
 
 

Main fittings list
 

No.	Description	Manufacturer	quantity
1	Electric motor	Dezhou Hengli Electrical Machinery Co.,Ltd	1
2	Hydraulic pump	() Parker Hannifin Fluid Power System and Components ( Shanghai ) Co,.Ltd	1
3	Flooding valve	() Parker Hannifin Fluid Power System and Components ( Shanghai ) Co,.Ltd	1
4	Operating hand valve	() Parker Hannifin Fluid Power System and Components ( Shanghai ) Co,.Ltd	1
5	Slewing ring	AnHui NingGuo ShunChang Slewing ring Co,.Ltd	1
6	Hoisting  winch	China	1

 

China

1

 

China

1

 

China

1

 

China

1